Fujitsu P42hts40 Users Manual

English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Before Use
• INFORMATION ............................................................ E-2
• INSTALLATION ............................................................ E-4
Usage
• PART NAMES AND FUNCTIONS ............................... E-5
• USING THE REMOTE CONTROL ............................. E-12
• CONNECTING THE DISPLAY TO EXTERNAL 
EQUIPMENT .............................................................. E-14
• BASIC OPERATIONS...

E-2
INFORMATION
• Receptacle
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire.  If you have only a 2-hole receptacle, you 
will need to have it replaced.  Contact your dealer for more information.
• Have the display inspected and cleaned by your dealer at regular intervals.
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods.  To ensure that the display...

E-3
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Display Section 
AV Selector Section
CHECKING ACCESSORIES
One power cable One System cable
(picture)One System cable
(audio) Two small ferrite cores One big ferrite core
No.:SFT-72SN
Mfr.:TKK No.:ZCAT1518-0730
Mfr.:TDK
Two AA batteries One remote control  One power cable Two users manuals
ManualManual
 One big ferrite core
No.:SFT-72SN
Mfr.:TKK
MHD01862_E.book  3 ページ  ２００５年６月１４日　火曜日　午前１１時５０分
 

E-4
INSTALLATION
To prevent the displays internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer 
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display...

E-5
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
Power indicator lamp 
This lamp shows the state of the power supply. 
Lit (red): Stand-by state
Lit (green): Power ON state
Flashing (red or green): Malfunction (Flashes differently 
depending on the type of 
malfunction.) 
Remote control signal receiver 
Receives signals from the remote control. 
Input mode selector button  [MODE] 
Input mode selector button  [MODE] 
Switches...

E-6
PART NAMES AND FUNCTIONS (Continued)
 /l power switch 
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.
If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.
*Power is still supplied to parts of the display even if the indicator lamp is off.
Display input (picture) terminal 
Connect this...

E-7
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
Power indicator lamp 
This lamp shows the state of the power supply. 
Lit (red): Stand-by 
Lit (green): Power ON 
Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) 
Remote control signal receiver 
Receives signals from the remote control. 

 /l power switch 
If this button is pressed when the power indicator lamp is off, the indicator lamp will light.
The power can be turned on...

E-8
PART NAMES AND FUNCTIONS (Continued)
Audio input terminals 
Input audio through the terminals corresponding to the used video input terminals.
* The digital input terminals can be matched as desired with the remote control. (See P. E-29.)
Audio output terminals 
For use when the audio from an audio system (amplifier) is used. 
Video1 input terminal 
Video2 input terminal 
Video4 input terminal 
Connect this terminal to the SCART terminal of your VCR or DVD, etc. 
* See SETTING THE INPUT...

E-9
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês
日 本 語
Póññêèé
中文
HDMI, the HDMI logo and High-Definition Multimedia interface are trademarks or registered 
trademarks of HDMI Licensing LCC.
DESCRIPTION OF INPUT TERMINALS 
DVI-D terminal (RGB1 INPUT/DVI-D) Pin No. Signal Pin No. Signal Pin No. Signal
1 T.M.D.S. Data2– 9 T.M.D.S. Data1– 17 T.M.D.S. Data0–
2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3
T.M.D.S. Data2 
Shield11T.M.D.S. Data1 
Shield19T.M.D.S. Data0 
Shield
4— 12— 20—
5—...

E-10
PART NAMES AND FUNCTIONS (Continued)
For details, see page Î.
REMOTE CONTROL
 button Î E-24
Switches between Power On and Standby.

 (STILL button) Î E-29
Displays the screen being watched as the still picture. To return to normal, press this 
button once again.

 (WIDE button) Î E-30
Switches the screen size.

 (TV input mode selector button) Î E-26
Press this button to watch terrestrial broadcastings.

 (Video input mode selector button) Î E-28
Press this button to switch through VIDEO1...