Fujitsu P42hts40 Users Manual
Have a look at the manual Fujitsu P42hts40 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-21 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 • A video camera can conveniently be connected to the Video 3 input on the front side. • Connect the video signal cable to either the S-video input terminal or the video input terminal. • If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal. • As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine. • Connect the video signal cable to either the S-video input terminal or the video input terminal. • Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on the screen for an extended period, the brightness of that part of the screen may change and image burn-in may leave an after-image on the screen. • If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal. VIDEO CAMERA VIDEOGAME MACHINE To video and audio outputs To S-video outputTo video and audio inputs To S-video input Front side of AV Selector To video and audio outputs To S-video outputTo video and audio inputs To S-video input Front side of AV Selector Note • Unplug the power cord from the AC outlet before you connect external components. • Also refer to the instructions for the component to be connected. • When inputting audio, connect to the terminals corresponding to the used video input or RGB input. MHD01862_E.book 21 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-22 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued) • As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase. • The PC can be connected to either the front side or the rear side, whichever is most convenient. PC To audio input To RGB output (mD-sub) To RGB output (DVI-D)To audio output To mD-sub input To DVI-D input When connecting to the front side of the AV Selector To audio input To RGB output (mD-sub) To audio output To mD-sub input When connecting to the rear side of the AV Selector MHD01862_E.book 22 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-23 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 • Connect the audio signal cables to the digital output and the analog audio output terminals. * The signal input as digital input is not output as analog audio. * The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier)*. WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER Rear side of AV Selector To digital audio input To analog audio input To digital audio output To analog audio output Note • Unplug the power cord from the AC outlet before you connect external components. • Also refer to the instructions for the component to be connected. • When inputting audio, connect to the terminals corresponding to the used video input or RGB input. MHD01862_E.book 23 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-24 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY 1 Press OFF/ON /I to the left at the bottom of the display and /I to the left at the bottom of the AV Selector to the STD-BY state. The power lamp lights up. 2 Press on the remote control. The color of the power lamp changes from “Red” to “Green”. 3 Press , the button of the channel you want to watch, and then press or . Select TV or the picture mode to input. 4 Press when the power is ON. The color of the power lamp changes from “Green” to “Red” and the display goes into standby state. * You can also use the buttons on the display’s control panel to perform these steps. MHD01862_E.book 24 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-25 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 ADJUSTING THE VOLUME Adjusting the volume Press to increase the volume. Press to reduce the volume. * Note that the volume level remains stored even when you turn OFF the power. Muting the audio Press . The audio is removed. Press again to restore the audio to the original level. The mute mode can also be released by pressing the volume buttons. * You can also use the buttons on the display’s control panel to perform these steps. When the volume adjustment button is pressed Note • Functions may not be available with some models and some device options. MHD01862_E.book 25 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-26 SELECTING INPUT MODE WATCHING A TV BROADCASTING 1 Select the country. Select the country using the Auto Store function in the CHANNEL SETTING menu (see page E-40). This enable the terrestrial broadcastings to be watched for selected country. 2 Press . Available to watch the terrestrial broadcastings. The last Program No. that you watched is received. 3 Select the Program No. Press – . The program changes to the selected Program No. Select your desired Program No. (0 to 99). • Even if you press – , the Program No. can be changed as shown below. (Available in TV mode) : : * The program numbers set to skip over are not shown on the display. See page E-40 for details. CH. Return Press . The program returns to the previous program, or Video mode or RGB mode that you watched. * See pages E-40 for details on the other settings. * You can also use the buttons on the display’s control panel to perform these steps. MHD01862_E.book 26 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-27 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 WATCHING A TELETEXT BROADCASTINGS 1 Display the TV program. Press to set to TV mode. 2 Press . This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. * Whenever is pressed, the screen switches between teletext screen superimposed over the TV program and teletext-only screen. • Displays the teletext page program. The teletext page program is displayed when 3 digit number by – and is pressed. • Storing and displaying favorite teletext programs. 1)Press to select the LIST mode. 2) Press or to select the color button for storing the teletext page program. 3) Press for three seconds at least to store the displaying teletext program to the color button. (During the storing operation, the color button momentarily turns white.) 4) In the LIST mode, press or to display the stored teletext page program. * Press , , or to return to the other modes. * See pages E-10 to E-11 for information on the other keys. * There is no function in the teletext broadcasting screen. * If you have trouble at the receiving of the teletext broadcastings, consult with your local dealer or the teletext broadcasting. MHD01862_E.book 27 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-28 SELECTING INPUT MODE (Continued) VIDEO INPUT MODE 1 Press to select the input mode. You can select from VIDEO 1 mode to VIDEO 7 mode. The video modes corresponding to each input terminal are as follows. •VIDEO1: SCART •VIDEO2: SCART • VIDEO3: Video, S-video •VIDEO4: SCART • VIDEO5: Component video • VIDEO6: Component video • VIDEO7: HDMI * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E - 4 0 . * You can also change VIDEO mode by pressing – during Video indication on the screen by pressing when selected On in ON SCREEN MENU (P. E-39) RGB INPUT MODE 1 Press to select the input mode. You can select between the modes from RGB1 to RGB3. The input terminal of each RGB mode is as follows. • RGB1: DVI-D •RGB2: mD-sub •RGB3: mD-sub * You can also change RGB mode by pressing – during RGB indication on the screen by pressing when selected On in ON SCREEN MENU (P. E-39). * You can also use the buttons on the display’s control panel to perform these steps. Video1 mode * You can also use the buttons on the display’s control panel to perform these steps. RGB1 mode MHD01862_E.book 28 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-29 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 OTHER BASIC OPERATIONS CONVENIENT FUNCTIONS Still Picture Press . The currently viewed scene can be viewed as a still picture. Convenient when you want to take a note, etc. Press again to return to the normal picture. On-screen information showing the channel, etc. Press . The channel or mode is indicated on the screen for 5 seconds. Picture Mode Press . This button can be used to switch the picture mode. In the picture mode, you can switch between the set status and the fine mode. * For the picture mode settings, see “Setting Picture Mode (P. E-35)”. Picture Memory Press . This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is pressed, the setting changes as follows. * For the picture memory settings, see “Setting Picture Memory (P. E-35)”. Audio In Press . Switches the input audio. Each time this button is pressed, the input changes as follows. * The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. In the case of outputs with another frequency, connect to an audio system (amplifier)*. Dual channel switching Press . This function enables selection of the audio mode when there is a dual-channel broadcast. Each time this button is pressed, the mode is switched as shown in the figure below. Depending on the broadcast, this function may not be available. OFF-timer Press . This can be used to set the time before the power is turned off (stand-by state). Each time this button is pressed, the setting changes as follows. Note • Functions may not be available with some models and some device options. MHD01862_E.book 29 ページ ２００５年６月１４日 火曜日 午前１１時５０分
E-30 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 Press . The currently selected mode will appear. 2 Press to select a desired Screen Size. Each time you press , a different Screen Size appears. The sequences used are as follows: When you are in a Video input mode When you are in an RGB input mode * Depending on the type of signal, some aspects may not be selected. * You can also use the buttons on the display’s control panel to perform these steps. Normal mode Wide1 mode Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. • Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved. •See P. E-36 for how to adjust the picture size and position. MHD01862_E.book 30 ページ ２００５年６月１４日 火曜日 午前１１時５０分