Fujitsu P42hhs30 Users Manual

English
E-41
* On-screen information disappears if you do not take any action for about 60 seconds.
•Selection of indications
You can change the settings for indications for video inputs and RGB inputs.
V ideo input
You can change the settings for indications for the VIDEO1 – 6 inputs.
Select the desired indication in accordance with the connected equipment\
.
Each time 
  is pressed, the setting is switched. (In the case of VIDEO1)
V ideo1 DVD1 DVD2 VCR1 VCR2 GAME Camcorder STB Satellite Cable TV
Press...

E-42
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
OTHER SETTINGS
•Power saving settings
Function to prevent the TV from staying on if you forget to turn it off.
Auto Off-UNTOUCH
Each time   is pressed, the setting is switched.
Off 
 On
Off: Power is not turned off automatically.
On: If no operation has taken place for 3 hours, the power supply is automatically placed in the
standby mode.
Press 
 to store.
Auto Off-NO SIG.
Each time   is pressed, the setting is switched.
Off 
 On
Off: Power is not turned...

English
E-43
•Minimizing phosphor burn-in (Screen Orbiter) for RGB
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press 
.
The “Screen Orbiter” setting screen will appear.
(2) Press 
 or  to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press 
 or , one of the available choices appears in the following sequence:
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every...

E-44
* On-screen information disappears if you do not take any action for about 60 seconds.
•Specifying RGB Input Signal (Code Setting) for RGB2, RGB3
Normally, use this option in Auto mode.
•Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press 
 or , one of the available choices appears in the following sequence:
On 
 Off
Off: Does not display white.
On: Displays a white screen immediately....

English
E-45
INITIALIZATION OF USER ADJUSTMENT VALUE(FACTORY DEFAULT)
1
“FACTORY DEFAULT” selected in the
main menu screen
Displays the message of whether to
proceed the initialization
Displays the message of having
completed the initialization
You can restore the values of the adjustment/setting made in the MENU to factory settings.
PICTURE  POSITION/SIZE  AUDIO  FEATURES  FACTORY DEFAULT
3
4
5
Press .
The main menu screen will appear.
Press  or  to select “FACTORY
DEFAULT”.
Each time you press  or ,...

E-46
OPTIONS
Wall-mounting Bracket 0° to 15° mounting angle P-WB4201
Ceiling unit 0° to 15° mounting angle P-CT4200
Desktop Stand unit P-TT4200
SpeakerP-SP4200
(1 set of 2 speakers)
Desktop Speaker Stand P-ST4200
(1 set of 2 speakers stands)
*When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
*The colours of options do not match the display colours perfectly.
*To improve the function and performance of optional...

English
E-47
MAIN SUPPORTED SIGNALS
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-34–E-35 to adjust the
parameters.  When you finish, the settings will be automatically stored.  Thus, when the display receives that signal, pictures will be
displayed in accordance with the...

E-48
SPECIFICATION
Regulation
•UL, CSA Safety: UL6500, C-UL
EMC:FCC Part 15, ICES-003
•CESafety: EN60065
EMC: EN55013 2001
EN55020 1994
•ASSafety: IEC60065
EMC: AS/NZS 1053
AV SELECTOR
Model P-SU4H30E
Weight 4.5 kg / 9.9 lbs
Outer dimensions 43.0 (W) x 9.5 (H) x 37.0 (D) cm / 16.9 (W) x 3.7 (H) x 14.6 (D) inch
Power supply 110–240 VAC 50/60 Hz
Current rating 0.4 A
External equipment terminals
Video input terminal 1, 2, 4 Video, Audio: SCART terminal
Video input terminal 3 Video: Pin jack 1.0 Vp-p/75 Ω...

English
E-49
•Specifications and external appearance may be change for the sake of improvement.
•Viewing the screen constantly for extended periods can strain your eyes.  Be sure to stay at a proper distance (at least 1.5 m or 5 feet) from the
screen and to look occasionally away while working.
•is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
42” WIDE PLASMA DISPLAY
Model P42HHS30E
Screen size 42 wide screen: 92.2 cm (W)...

E-50
CLEANING AND MAINTENANCE
Action
•Check whether the power plug is securely inserted into the receptacle.
•Check cables for disconnection.
•Check whether the power for all input equipment is ON.
•Check for connection to wrong terminals or for wrong input mode.
•Check whether the input mode display is coloured pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.
•Check for incorrect battery orientation.
•Check for dead batteries.
•Check for distance...