Fujitsu P42hhs30 Users Manual

English
E-21
AUDIO
INPUTVIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTUREINPUT
DIGITALAUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO VIDEO5VIDEO1
Y            P
B/CB         PR/CRCOMPONENT VIDEOY            PB/CB         PR/CRCOMPONENT VIDEORGB2
RGB1
DVI SCARTSCART SCART
SATELLITE TUNER
•Connect the video signal cable to either the component video terminal or the SCART terminal.
•If the component to be connected is equipped with component video output terminal, it is recommended to...

E-22
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
VIDEO CAMERA
•A video camera can conveniently be connected to the Video 3 input on the front side.
•Connect the video signal cable to either the S-video input terminal or the video input terminal.
•If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
To S-video input To video and audio outputs
To S-video outputTo video and audio inputs
VIDEOGAME MACHINE
•As the connecting...

English
E-23
AUDIO
INPUTVIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO1
PICTUREINPUT
DIGITALAUDIO
OUTPUT
DISPLAY OUTPUT
VIDEO2
VIDEO4
mD-sub
PICTURE AUDIO VIDEO5VIDEO1
Y            P
B/CB         PR/CRCOMPONENT VIDEOY            PB/CB         PR/CRCOMPONENT VIDEORGB2
RGB1
DVI SCARTSCART SCART
 PC
•As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
•The PC can be connected to either the front side or the rear side,...

E-24
BASIC OPERATIONS
*You can also use the buttons
on the display’s control
panel to perform these steps.
 TURNING THE POWER ON AND OFF
1
2
3
Press OFF/ON  to the left at the
bottom of the display and 
 to
the left at the bottom of the
selector to the STD-BY state.
The power lamp lights up.
Press  on the remote control.
The colour of the power lamp changes from “Red”
to “Green”.
Press  –  or  – .
Select TV or the video mode to be input.
Press  when the power is ON.
The colour of the power lamp changes...

E-25
EnglishPress the Volume button
Press  to increase the volume.
Press 
 to reduce the volume.
Any value between 0 and 40 can be selected.
*Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
Press  .
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume
buttons.
ADJUSTING THE VOLUME
When the volume adjustment button is pressed

&.)%	@
KQ03.10.24, 0:47 PM Page...

E-26
SELECTING INPUT MODE
RGB INPUT MODE
1
RGB1 mode
Press the  –  buttons to
select the input mode.
You can select from VIDEO 1 mode to VIDEO 6
mode.
The video modes corresponding to each input
terminal are as follows.
•VIDEO1: SCART
•VIDEO2: SCART
•VIDEO3: Video,  S-video
•VIDEO4: SCART
•VIDEO5: Component video
•VIDEO6: Component video
*For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-41.
1
*You can also use the buttons
on the display’s control
panel to perform these...

English
E-27
CONVENIENT FUNCTIONS
OTHER BASIC OPERATIONS
Still Picture (STILL)
Press  .
The currently viewed scene can be viewed as a still picture.
Convenient when you want to take a note, etc. Press again to return to the normal picture.
On-screen information showing the channel, etc. (DISPLAY)
Press  .
The channel or mode is indicated on the screen for 5 seconds.
Picture Mode (PICTURE MODE)
Press .
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set...

E-28
WATCHING PICTURES ON THE WIDE SCREEN
Note
•Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
•A variety of picture modes are available with this display.  Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a...

E-29
English
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
SCREEN SIZE
ASPECT RATIO
The following aspect ratios are available.
16:9 aspect ratio
(HDTV broadcasting) 4:3 aspect ratio
(VHF/UHF broadcasting, BS broadcasting)
1.85:1 aspect ratio
(Vista Vision  size)2.35:1 aspect ratio
(Cinema Vision size)
4
3
16
9
1.85
1
2.35
1...

E-30
ADJUSTMENT MENU
ADJUSTMENT MENU
MENU
PICTURE
POSITION/SIZE
AUDIO
FEATURES
FACTORY DEFAULT
Treble
Bass
Balance
Loudness
Adjustment
Function
On Screen Menu
Input Terminal
OthersDot Clock
Clock Phase
Clamp Position
Auto Calibration
24 Frame Mode
Jaggies Filter
OSD
Language
Name Select
Video Input 1
Video Input 2
Video Input 3
Video Input 4
DVI Input
Power Saver
Screen Orbiter **
Direct Setting **
Code Setting
White Screen
Exhibition Mode
Illumination
InformationAuto Off - UNTOUCH
Auto Off - NO SIG....