Fujitsu Myrica V32 1 User Manual
Have a look at the manual Fujitsu Myrica V32 1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 39 Having this problem? Check the following points: The picture has shadows or ghost images Check antenna cable Use a directional antenna instead of an omnidirectional antenna. Picture shows interference, false colours or line and picture shaking Check whether the LCD TV is set to the correct TV standard (PAL or SECAM). Troubleshooting in PC mode Having this problem? Check the following points: Picture only black or blue ► Check the setting of the picture signal source. ► Check whether the data cable is correctly connected. Message OUT OF RANGE or Picture only black or blue The input signal (horizontal frequency and refresh rate) at the displayed input does not correspond to the technical LCD TV data. ► Adjust the video frequency range using the computer software (see documentation for your computer or your graphics card). Vertical parts of letters are shown distorted or cut off The resolution cannot be shown optimally. Change over the computer to a resolution recommended for this TV (see Preset operating modes). Picture position is not correct The LCD TV recognises an undefined mode (see Technical data). ► Use the OSD function GEOMETRY/AUTO to carry out the self-adjustment of the LCD TV (see GEOMETRY menu - picture position and sharpness). ► Set the picture position with the OSD menu (see Operation). Picture is shaking ► Check whether the data cable for the LCD TV is correctly attached to the monitor port on the computer. ► Use the OSD function GEOMETRY/AUTO to carry out the self-adjustment of the LCD TV (see GEOMETRY menu - picture position and sharpness).