Fujitsu Myrica V32 1 User Manual

							  LCD TV MYRICA V27-1 / V32-1 
A26361-K1037-Z120-1-M119, edition 1  English - 19 
Remote control 
 1 = POWER - switches the device on or into 
the standby mode. 
 2 = MUTE - switches the sound on and off. 
 3 = FREEZE - freezes the video picture. 
If you press the button again, the picture 
returns to the normal mode. 
 4 = SLEEP - Sleep timer 
By pressing several times you can set the 
Sleep timer to 0, 30, 60, 90 or 120 minutes. 
PIP (Picture in Picture) 
 5 = PIPSOURCE - Activates the PIP mode 
Press this button once more to select the 
signal source for the PIP mode. 
 6 = SWAP - swaps the display of the main 
and the PIP window in the PIP mode 
 7 = POSITION - changes the position of the 
PIP window in the PIP mode 
 8 = SIZE - changes the size of the PIP 
window (3 different sizes) 
 9 = MAIN - activates the audio output of the 
main display in the PIP mode 
10 = PIP - activates the audio output of the 
PIP display in the PIP mode 
12
3
4
5
67
8
9
12
13
14 11 10
15
 
 11 = Volume -/+ 
12 = changing programs 
13 = 0 - 9 
With this button you select the programme 
directly. 
14 = R - Return 
With this button you change back to the 
programme previously set. 
15 = i - Informations 
With this button you display the signal status 
(input source, channel; audio mode). 
 
 
						

							LCD TV MYRICA V27-1 / V32-1   
20 - English A26361-K1037-Z120-1-M119, edition 1 
 
Teletext 
16 = TELETEXT - activates the Teletext 
function 
If you press the button again, Teletext with the 
TV function is activated. 
When you press the button a third time, the 
Teletext function is switched off. 
17 = PREDEFINED SETTINGS 
With this button you save favorite Teletext 
pages for quick access using the coloured 
buttons. 
18 = INDEX - opens the Index page 
With the number buttons (0 to 9) you can 
number the Teletext page and add it to the 
selected page or the second element. 
19 = SUB - opens the sub-page (if available) 
20 = PAGE UP/DOWN - scrolls in Teletext 
21 = SHOW - shows hidden information, e.g. 
the answer to a riddle 
22 = SIZE - changes the font size 
FULL (entire screen) default full-screen 
Teletext 
TOP (upper half) - the content of the upper 
half of the page is shown on the entire screen 
BOTTOM (lower half) - the content of the 
lower half of the page is shown on the entire 
screen 
23 = STOP - stops the automatic scrolling of a 
Teletext page 
24 = R / G / Y / B - opens special pages 
Each channel offers its own functions. 
18 16
17
22
23
24 2119
26
27 2520
29 28
 
 25 = ASPECT - changes the page aspect of 
the display (4 level) 
26 = PICTURE 
With this button you select the picture mode. 
Possible values: MOVIE, SPORT, GAME, 
VIVID, USER 
27 = MENU - Opens the OSD menu 
28 = AUDIO 
With this button you select an audio setting. (4 
options) 
29 = SOURCE 
With this button you select the signal source. 
 
						

							  LCD TV MYRICA V27-1 / V32-1 
A26361-K1037-Z120-1-M119, edition 1  English - 21 
Changing device settings with remote control 
You can open and operate the integrated OSD (On Screen Display) menu with the buttons of the 
control panel on the LCD TV or the remote control. 
The VOLUME- control button is equivalent to the 
 button on the remote control. 
The VOLUME+ control button is equivalent to the 
 button on the remote control. 
The CHANNELS control button is equivalent to the 
 button on the remote control. 
The CHANNELT control button is equivalent to the 
 button on the remote control. 
To set the OSD menu, perform the following steps: 
►  Press the MENU button to open the OSD menu. 
►  Mark the desired menu item with the 
 /  buttons. 
► Press the 
 button to open a submenu and activate a menu item. 
In the individual menus, the buttons available to you in each case are shown. 
►  Mark the option you want to change. 
►  Set the desired value or activate the desired function. 
►  Press the MENU button to return to the main menu from a submenu or to exit the OSD menu. 
All changes are stored automatically. 
 
						

							LCD TV MYRICA V27-1 / V32-1   
22 - English A26361-K1037-Z120-1-M119, edition 1 
Description of menus 
i The OSD menu is available in different languages. The English menu names are used in 
the following description (default setting). 
Different menus and different options are available to you depending on the set signal 
source. The currently available menus and options are shown brightly highlighted in each 
case in the OSD menu. 
 The following main menus are available to you in the OSD menu: 
 DISPLAY 
Here you set the default picture settings (colours, contrast etc.). 
 ADVANCED 
Here you set the picture mode and the advanced picture settings. 
 GEOMETRY 
Here you set the position and sharpness of the picture. 
 TV SETUP 
Here you set the programmes of your LCD TV. 
 AUDIO 
Here you set the sound of your LCD TV. 
 SYSTEM 
Here you set the language and the transparency of the OSD menu. 
 
						

							  LCD TV MYRICA V27-1 / V32-1 
A26361-K1037-Z120-1-M119, edition 1  English - 23 
DISPLAY menu - default picture settings 
CONSTRAST (contrast) 
This function increases or decreases the contrast. 
Possible values: 0 -100 
BRIGHTNESS (brightness) 
With this function you set the picture brighter or darker. 
Possible values: 0 -100 
COLOUR TEMP (colour temperature) 
With this button you set the colour temperature. 
Possible values: COOL, NORMAL, WARM, USER 
RED 
GREEN 
BLUE 
With this function you increase or decrease the intensity of 
the marked colour. 
Possible values: 0 -100 
WHITE BALANCE 
With this function you set the white balance. 
BACK LIGHT 
With this function you set the intensity of the background 
lighting. 
Possible values: HIGH, NORMAL, LOW 
SATURATION 
With this function you set the colour saturation. 
Possible values: 0 -100 
HUE 
With this function you set the hue redder or greener. 
Possible values: -25 - 25 
SHARPNESS 
With this function you set the sharpness of the picture. 
Possible values: 0 -100 
For TV/S-VIDEO/SCART/YPbPr: 
 
For VGA: 
 
For DVI: 
 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
						

							LCD TV MYRICA V27-1 / V32-1   
24 - English A26361-K1037-Z120-1-M119, edition 1 
ADVANCED menu - advanced picture settings 
PICTURE MODE 
With this function you set the picture mode. 
Possible values: MOVIE, SPORT, GAME, VIVID, USER 
 
The following options are only available if you have selected 
the USER setting under PICTURE MODE.
 
NOISE REDUCTION 
With this function you set the strength of the noise 
reduction. 
Possible values: HIGH, NORMAL, LOW 
FILM MODE 
With this function the received video signals are output in 
an aspect ratio of 3:2. 
Possible values: ON / OFF 
DLC (Dynamic Lumar Correction) 
With this function you activate/deactivate the Lumar 
correction. 
Possible values: ON / OFF 
SKIN TONE 
With this function you activate/deactivate the skin-colour 
correction (yellow and red hues). 
Possible values: ON / OFF 
NATURE COLOR 
With this function you activate/deactivate the natural colour 
correction (blue and green hues). 
Possible values: ON / OFF 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings.
 
 
 
						

							  LCD TV MYRICA V27-1 / V32-1 
A26361-K1037-Z120-1-M119, edition 1  English - 25 
GEOMETRY menu - picture position and sharpness 
These settings are only available when you use the LCD TV as a monitor for your PC 
(SOURCE=PC). 
 AUTO (automatic setting) 
With this function you set the picture settings automatically.
 
CLOCK 
With this function you set the fine tuning of the VGA 
alignment for a stable VGA display. 
Possible values: 0 -100 
PHASE 
With this function you set the focus and the sharpness of 
the VGA display. 
Possible values: 0 -100 
H-POSITION (horizontal position) 
With this function you move the picture to the left or to the 
right. 
Possible values: 0 -100 
V-POSITION (vertical position) 
With this function you move the picture up or down. 
Possible values: 0 -100 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
 
						

							LCD TV MYRICA V27-1 / V32-1   
26 - English A26361-K1037-Z120-1-M119, edition 1 
TV SETUP menu - setting channels 
CH SCAN (automatic programme search) 
With the 
 button you start the automatic programme 
search. 
The automatic programme search must be carried out when 
you want to use your LCD TV for the first time following 
installation. 
A detailed description is provided under Carrying out 
programme search. 
The programmes will be entered in the programme list in 
the order in which they are found. However, you can 
change the order of the programmes later.  
A detailed description is provided under Carrying out 
programme search and Arranging programmes. 
PROGRAM 
With this function you change the order of the programmes 
in the programme list or the properties of the individual 
programme (e.g. porgramme name). 
A detailed description is provided under Arranging 
programmes and Changing programme properties. 
MANUAL SCAN (manual programme setting) 
With this function you manually set the frequency and TV 
standard of an individual channel. 
The set values remain unchanged until an update is carried 
out. 
A detailed description is provided under Setting the 
channel. 
 
UPDATE SCAN (update programme list) 
With this function you search for additional programmes 
when a programme search has already been carried out. 
The sorting of the programme list is retained and new 
programmes found are added at the end of the programme 
list. 
 
i Different programmes are available on some channels at different times. As a result, it is 
possible that, depending on the time of a programme search, different programmes will be 
found. 
 
 
						

							  LCD TV MYRICA V27-1 / V32-1 
A26361-K1037-Z120-1-M119, edition 1  English - 27 
AUDIO menu - sound settings 
BALANCE 
With this function you set the balance between the left and 
the right loudspeaker. 
BASS 
This button increases or decreases the bass level. 
Possible values: 0 -100 
TREBLE 
This button increases or decreases the treble level. 
Possible values: 0 -100 
SURROUND 
With this function you activate/deactivate the surround-
sound function of your LCD TV. 
Possible values: ON / OFF 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
SYSTEM menu - system settings 
LANGUAGE 
With this function you set the language of the OSD menu. 
OSD BACKGROUND 
With this function you set the transparency of the OSD 
menu 
Possible values: OPAQUE, TRANSLUCENT 
 RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
 
						

							LCD TV MYRICA V27-1 / V32-1   
28 - English A26361-K1037-Z120-1-M119, edition 1 
Display modes 
Main display mode 
►  Press the SOURCE button on the remote control or on the underside of the LCD TV to select 
the source from which the signal for the main display is to come. 
For the main display you can select one of the following signal sources: 
● TV 
● CVBS(AV) 
● S-VIDEO  
● SCART1 
● SCART2 
● YPbPr 
● VGA (PC) 
● DVI 
By pressing the  i button  (15) you display the designation of the currently selected signal sources 
in the upper rihgt corner of the screen (see illustration). 
12
4 3
5
7 6
9 8
 
1 = Displayed 
main signal Signal source Main:
2 = Main signal 
3 = Programme 
4 = Audio mode Signal source PIP: 
5 = Sub-signal 
6 = Programme number
7 = Audio mode 8 = Shows the sound source  
(Main or Sub-signal) 
9 = Displayed Sub-signal