Fujitsu Myrica V32 1 User Manual
Have a look at the manual Fujitsu Myrica V32 1 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 9 SCART1 Connection for AV, RGB and audio input signals e.g. for satellite receiver, DVD player, video recorder, camcorder, decoders or a gaming console Out (TV-signal): e.g. video recorder, dvd recorder SCART2 Connection for AV, RGB and audio input signals e.g. for satellite receiver, DVD player, video recorder, or a gaming console Out (picture signal) AV: AUDIO red (right) white (left) VIDEO yellow Connections for video and audio input signals e.g. for DVD player, video recorder, film camera with S-Video connection or gaming console S-VIDEO IN: AUDIO red (right) white (left) S-VIDEO Connections for S-video and audio input signals e.g. for DVD player, video recorder, a film camera with S- Video connection or a PC TV-ANT. antenna port AC INPUT Connector for the power cable
LCD TV MYRICA V27-1 / V32-1 10 - English A26361-K1037-Z120-1-M119, edition 1 Connecting LCD TV Connecting antenna ► Connect an antenna cable to the device and the TV antenna socket. Connecting the power supply ► Plug the power cable supplied into the power connector of the LCD TV. You will find the power connector on the underside of the LCD TV. ► Connect the connector of the power cable supplied into a properly earthed mains outlet and ensure a secure connection.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 11 Switching LCD TV on/off MYRICA V27-1 ► Press the On/Off switch at the lower right on the front of the LCD TV. MYRICA V32-1 ► Press the On/Off switch at the lower left on the front of the LCD TV. From the indicator at the lower right on the front of the LCD TV you can recognise whether the device is in operation, in the standby mode or switched off. Green Red Dark = = = The device is switched on. The device is in standby mode. The device is switched off.
LCD TV MYRICA V27-1 / V32-1 12 - English A26361-K1037-Z120-1-M119, edition 1 Setting language of the OSD menu After switching on the device, set the language of the OSD (On Screen Display) menu according to your needs. ► Switch the LCD TV on with the ON/OFF switch. ► Press the POWER button. ► Press the MENU button to open the OSD menu. ► Choose the SYSTEM menu item using the button. ► Press the button to activate the menu item. The menu item LANGUAGE is preset. ► Press the button to activate the menu item. ► Select the language to be shown in the OSD menu with the button. ► Press the Menu button. The OSD menu will be changed over to the selected language. Carrying out programme search A programme search must be carried out to put the LCD TV into operation. Use the supplied remote control. ► Switch the LCD TV on with the ON/OFF switch. ► Press the POWER button. ► Press the MENU button to open the OSD menu. ► Choose the TV SETUP menu item using the button. ► Press the button to activate the menu item. The menu item CH-SCAN is preset. ► Press the button to activate the menu item. ► Select your country with the button. ► Press the button to start the programme search. Wait until the programme search is completed. Then the device shows the first programme found. i Different programmes are available on some channels at different times. As a result, it is possible that, depending on the time of a programme search, different programmes will be found.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 13 i The programmes will be entered in the programme list in the order in which they are found. However, you can change the order of the programmes later (see Arranging programmes). Adjusting programme settings After the programme search, you can change various programme settings later, e.g. the order of the programmes in the programme list, the programme names or the frequency of a channel. The following sections contain a description of how to change the settings. In the following sections Arranging programmes, Changing programme properties and Setting the channel a description of how to set the programmes is provided. Arranging programmes With the OSD menu you can rearrange the order of the programmes according to your personal preferences. To rearrange the order of the programmes, first mark the respective program you want to move, and then mark the programme with which it is to exchange its position in each case. ► Press the MENU button to open the OSD menu. ► Choose the TV SETUP menu item using the button. ► Press the button to activate the menu item. ► Choose the PROGRAM menu item using the button. ► Press the button to activate the menu item.
LCD TV MYRICA V27-1 / V32-1 14 - English A26361-K1037-Z120-1-M119, edition 1 The programme list will be displayed with the first 9 programmes found. If a programme name was detected during the programme search, it will be displayed. ► Select the programme you want to move with the buttons / and mark it by pressing the button. The marked programme is displayed in green. ► Select the position at which you want to insert the programme with the buttons / . ► Press the button . The selected programmes swap their positions. Changing programme properties You can change the following properties of a programme: ● You can change the frequency of a programme. ● You can change the programme name displayed in the programme list (maximum of 5 characters). ● You can Hide a programme in the programme list (SKIP). ● You can select a different TV standard. ► Press the MENU button to open the OSD menu. ► Choose the TV SETUP menu item using the button. ► Press the button to activate the menu item. ► Choose the PROGRAM menu item using the button. ► Press the button to activate the menu item. The programme list will be displayed with the first 9 programmes found. ► Press the button to change to the menu for setting the programme properties. Setting frequency ► Mark the property CH with the buttons / . ► Set the frequency as required with the / buttons.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 15 Changing programme name Five characters are available for the programme name. ► Mark the position for the character you want to change under ID with the buttons / . ► Select the desired character at this position with the buttons / . ► Repeat this procedure until you have entered the desired programme name. Hiding programme in programme list If you want to hide a programme in the programme list (SKIP=switched on), the programme is skipped when you change the programmes with the buttons / . ► Mark the property SKIP with the buttons / . ► Switch the SKIP property on or off with the buttons / . Selecting a different TV standard ► Mark the property TV SYS with the buttons / . ► Select the desired TV standard with the / buttons. Setting the channel You can manually set the frequency and the TV standard for each channel. ► Press the MENU button to open the OSD menu. ► Choose the TV SETUP menu item using the button. ► Press the button to activate the menu item. ► Choose the MANUAL SCAN menu item using the button. ► Press the button to activate the menu item. Setting frequency ► Mark the property MHz with the buttons / . ► Set the frequency as required with the / buttons. Selecting a different TV standard ► Mark the property TV SYS with the buttons / . ► Select the desired TV standard with the / buttons.
LCD TV MYRICA V27-1 / V32-1 16 - English A26361-K1037-Z120-1-M119, edition 1 Add Programs i Different programmes are available on some channels at different times. As a result, it is possible that, depending on the time of a programme search, different programmes will be found. With this function you search for additional programmes when a programme search has already been carried out. The sorting of the programme list is retained and new programmes found are added at the end of the programme list. ► Press the MENU button to open the OSD menu. ► Choose the TV SETUP menu item using the button. ► Press the button to activate the menu item. ► Choose the UPDATE SCAN menu item using the button. ► Press the button to activate the menu item. ► Select your country with the button. ► Press the button to start the programme search. Wait until the programme search is completed. Then the device shows the first programme found.
LCD TV MYRICA V27-1 / V32-1 A26361-K1037-Z120-1-M119, edition 1 English - 17 Operation Controls are provided on the device and the remote control for operating the LCD TV. Operating elements on the device The operating controls of the LCD TV are located in the underside of the device. With these buttons you can operate the basic functions of the LCD TV and the OSD menu. 13245 1 = STANDBY button for changing over from the Normal mode to the Standby mode and vice versa 2 = SOURCE button for selecting the video input source 3 = Programme selection button (CHANNEL) or button for selecting a function 4 = Volume button (VOLUME) or button for setting values 5 = MENU button for opening or exiting the OSD menu
LCD TV MYRICA V27-1 / V32-1 18 - English A26361-K1037-Z120-1-M119, edition 1 Changing the device settings with the buttons of the control panel Use the buttons of the control panel to make the following device settings directly while the OSD menu is switched off. Selecting picture signal source ► Press the SOURCE button. The current signal input is displayed. ► Press the SOURCE button repeatedly until the desired signal input appears. Selecting TV programme ► Press the ST buttons to change over to the next or previous programme. Adjusting the volume ► Press the W / X buttons to adjust the volume. Opening and operating OSD menu ► Press the MENU button to open the OSD menu. ► Mark the desired menu item with the S/T buttons. ► Press the X button to open a submenu and activate a menu item. ► Set the values as required with the W / X buttons. ► Press the MENU button to return from a submenu to the main menu. All changes are stored automatically.