Fujitsu Lpf-D711 Users Manual

							E-41
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-42
ADJUSTING THE PICTURE (Continued)
• See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-39.
Even more advanced Sharpness adjustments can be made as required.
Adjusting the Black Level
Press F to strengthen the reproduction of black. (Provides a picture quality with deep blacks.)
Press 
E to weaken the reproduction of black.
Press 
< to store.
Setting Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time 
E or F is pressed, the setting is switched.
On
						

							E-43
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-44
ADJUSTING THE PICTURE (Continued)
Setting the Color Focus
This enables correction with respect to specific color hues within the image.
Independent correction of the hue of skin colors, blue skies, and so on, enables a more brilliant display.
• [Reddish color]
With red at the center, performs the following corrections with respect to the range from magenta to 
yellow.
[Tint]: Use 
E and F to adjust the hue.
[Color]: Use 
E and F to adjust the color depth.
[Red]: Use 
E and F to adjust the strength of the red color range.
[Green]: Use 
E and F to adjust the strength of the green color range.
[Blue]: Use 
E and F to adjust the strength of the blue color range.
Press 
< to store.
Adjustments can be made in the same way for:
• [Greenish color]: (With green at the center, performs corrections with respect to the range from yellow to cyan.)
• [Bluish color]: (With blue at the center, performs corrections with respect to the range from cyan to magenta.)
• [Targeting Red]
This function corrects the hue and color depth with respect to Red.
[Tint]: Use 
E and F to adjust the hue.
[Color]: Use 
E and F to adjust the color depth.
Press 
< to store.
Adjustments can be made in the same way for:
• [Targeting Yellow] (Performs correction with respect to Yellow.)
• [Targeting Green] (Performs correction with respect to Green.)
• [Targeting Cyan] (Performs correction with respect to Cyan.)
• [Targeting Blue] (Performs correction with respect to Blue.)
• [Targeting Magenta] (Performs correction with respect to Magenta.)
• [Targeting White]
Corrects red, green, and blue with respect to white.
[Red]: Use 
E and F to adjust Red.
[Green]: Use 
E and F to adjust Green.
[Blue]: Use 
E and F to adjust Blue.
Press 
< to store.
Color Focus (Reddish color) 
Settings Screen 
						

							E-45
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-46
ADJUSTING SCREEN POSITION AND SIZE 
• You can make changes to all screen adjustment options in the POSITION/SIZE Menu. See Page 
E-39 for the basic operation procedures.
• The changes you make will be stored for the selected input mode.  Therefore, you need to select a 
desired input mode before making any changes.
* The adjustment range may differ depending on the input signal.
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
F: Moves screen to the right.
E: Moves screen to the left.
Vertical position (Vertical)
C: Moves screen up.
D: Moves screen down.
Press 
< to store.
Adjusting Screen Size (Size)
Screen width (Width)
F: Increases width.
E: Reduces width.
Screen height (Height)
C: Increases height.
D: Reduces height.
Press 
< to store.
*You cannot adjust screen size in DVI-D mode.
POSITION/SIZE Menu screen
“Position” adjustment screen
“Size” adjustment screen 
						

							E-47
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-48
OTHER ADJUSTMENTS (Continued)
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.  (Error messages are 
displayed regardless of what choice you make for this option.)
Each time you press 
E or F, one of the available choices appears in the following sequence:
[On (OSD:bright)]: On-screen information shown in light color.
[On (OSD:dark)]: On-screen information shown in dark color.
[Off]: Except for menus and error messages, on-screen information is not displayed.
Press 
< to store.
* When the screen is white [On (OSD:dark)], some of the information may be difficult to read.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press 

						

							E-49
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-50
OTHER ADJUSTMENTS (Continued)
Auto Off-NO SIG.
If there is no video signal for 10 minutes, the power supply is automatically placed in the standby mode.
Each time 
EF is pressed, the setting is switched.
Off < On
Press 
< to store.
Audio input selection
The input audio signal can be switched over from analog to digital.
Each time 
E or F is pressed, the input signal changes in the following sequence.
When other than HDMI input is selected:
When HDMI input is selected:
Press 
< to store.
OTHER SETTINGS
Auto Off-NO SIG. settings 
screen
"Audio Input signal" selection 
screen
Analog Digital 1 Digital 2
HDMI Digital 1 Digital 2