Fujitsu Lpf-D711 Users Manual
Have a look at the manual Fujitsu Lpf-D711 Users Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
E-31 English Deutsch Espa ñol Fran çais Italiano Portugu ês
E-32 BASIC OPERATIONS (Continued) ADJUSTING THE RECTANGULAR DISTORTION OF THE PICTURE 1 Press \. The adjustment menu display appears. 2 Press CD to select "Correct Keystone". 3 Press
E-33 English Deutsch Espa ñol Fran çais Italiano Portugu ês
E-34 SELECTING INPUT MODE VIDEO INPUT MODE 1 Press the -( buttons to select the input mode. You can select from VIDEO 1 mode to VIDEO 7 mode. The video modes corresponding to each input terminal are as follows. • VIDEO1: Video, S-video, Component video • VIDEO2: Video, S-video, Component video • VIDEO3: Video, S-video • VIDEO4: Video, S-video, Component video • VIDEO5: Component video • VIDEO6: Component video • VIDEO7: HDMI * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E - 4 9 . RGB INPUT MODE 1 Press )-+ to select the input mode. You can select between the modes from RGB1 to RGB3. The input terminal of each RGB mode is as follows. • RGB1: DVI-D •RGB2: mD-sub •RGB3: mD-sub Video1 mode RGB1 mode
E-35 English Deutsch Espa ñol Fran çais Italiano Portugu ês
E-36 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 Press . The currently selected mode will appear. 2 Press to select a desired Screen Size. Each time you press , a different Screen Size appears. The sequences used are as follows: When you are in a Video input mode When you are in an RGB input mode * Depending on the type of signal, some aspects may not be selected.Normal mode Wide1 mode Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of Screen Sizes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio. • Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making purposes or for a public audience may constitute a copyright infringement. For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved. •See P. E-46 for how to adjust the picture size and position.
E-37 English Deutsch Espa ñol Fran çais Italiano Portugu ês
E-38 ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. MENU PICTURE (E-39) Signal Contrast (E-40) POSITION/SIZE (E-46) Drive Contrast (E-40) Black Level (E-42) FEATURES (E-47) Brightness (E-40) Detail Gradation (E-42) FACTORY DEFAULT (E-53)Color (E-40) 3D NR (E-42) Tint (E-40) CODEC NR (E-42) Sharpness (E-40) Image Enhance (E-43) Image identify (E-43) Picture Mode (E-40) Color Temp. (E-43) Lamp (E-40) User Color Temp. (E-43) Light Control (E-41) Color Focus (E-44) PrecisionSetting (E-41) Progressive Scan (E-45) 24 Frame Mode (E-45) Picture Memory (E-41) 30 Frame Mode (E-45) Default Jaggies Filter (E-45) Motion Setting (E-45) Position (E-46) Size (E-46) Default Reverse Mode (E-33) Lens Shift (E-31) Set Up (E-35) Correct Keystone (E-32) Zoom/Focus (E-35) Lamp Timer (E-57) Adjustment (E-47) On Screen Menu (E-48) Dot Clock (E-47) Input Terminal (E-49) Clock Phase (E-47) Others (E-50) Clamp Position (E-47) Auto Calibration (E-47) OSD (E-48) Language (E-48) Name Select (E-48) Video1 (E-49) Video2 (E-49) Video3 (E-49) Video4 (E-49) Auto Off-NO SIG. (E-50) Audio Input (E-50) Except HDMI input(E-50) Direct Setting (E-51) HDMI input (E-50) Code Setting (E-51) Blank Screen (E-51) Exhibition Mode (E-51) Information (E-52)
E-39 English Deutsch Espa ñol Fran çais Italiano Portugu ês
E-40 ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-39 for the basic operation procedures. Adjusting the Signal Contrast Press F to increase the input signal contrast. Press E to reduce the input signal contrast. Press < to store. Adjusting the Drive Contrast Press F The illumination level rises and the contrast increases over all gradation. Press E The illumination level lowers and the contrast reduces over all gradation. Press < to store. Adjusting the Brightness Press F to increase the brightness. Press E to reduce the brightness. Press < to store. Adjusting Color Press F to darken the color. Press E to lighten the color. Press < to store. Adjusting the Tint Press F to change the tint to a more greenish color. Press E to change the tint to a more purplish color. Press < to store. Adjusting the Sharpness Press F to sharpen the Sharpness. Press E to soften the Sharpness. Press < to store. Setting the Picture Mode Picture mode changes by pressing E or F, and the optimumë-curve for each picture mode shall be set up automatically. [Natural]: Displays a screen with detailed contrast. [Fine]: Suitable for watching a dark picture such as a movie. [Effective]: Enables you to watch pictures with natural color tones and high picture clarity. This mode is suitable for watching a normal motion picture. [Conventional]: Similar picture to CRT screen. [Still]: Suitable for viewing a still picture. Press < to store. Setting the luminance of the light source lamp Each time you press E or F, the luminance of the light source lamp changes over. Normal