Fujitsu Lpf-D711 Users Manual

							E-21
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-22
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
The projector unit has no speaker function.  To produce sound, connect it to an external amplifier.
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
ProjectorRemote control
VCR Î E-23
PC Î E-27
VCR or other external components See P. ÎAV  S e l e c t o r
Audio amplifier Î E-28 Video camera Î E-26
Videogame machine Î E-26 Satellite tuner Î E-25
DVD recorder/player Î E-24To AC outlet
To AC outlet
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• The projector unit has no speaker function.  To produce sound, connect it to an external amplifier. 
						

							E-23
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-24
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• Connect the picture signal cable to any one of the HDMI input terminal, component picture input terminal, S picture input terminal, or 
picture input terminal.
• When the equipment to be connected is equipped with the HDMI output terminal or the component picture output terminal, connection to 
either of these terminals is recommended.
DVD RECORDER/PLAYER
To S-video outputTo video output
To component video outputTo audio outputs
To video input To S-video input
To audio 
inputs
To component video input
Rear side of AV SelectorTo HDMI input To HDMI output 
						

							E-25
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-26
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• A video camera can conveniently be connected to the Video 3 input on the front side. 
• Connect the video signal cable to either the S-video input terminal or the video input terminal. 
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
• As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine. 
• Connect the video signal cable to either the S-video input terminal or the video input terminal. 
• Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on the screen for 
an extended period, the brightness of that part of the screen may change and image burn-in may leave an after-image on the screen. 
• If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.
VIDEO CAMERA
VIDEOGAME MACHINE
To video and audio outputs
To S-video outputTo video and audio inputs
To S-video input
Front side of AV Selector
To video and audio outputs
To S-video outputTo video and audio inputs
To S-video input
Front side of AV Selector 
						

							E-27
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-28
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
• Connect the audio signal cables to the digital output and the analog audio output terminals.
* Connect the audio signal to the digital audio output terminal and analog audio output terminal. For switching over the digital audio output 
terminal to the analog audio output terminal, see the audio input selection (page E-50).
* The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz. 
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
WHEN OUTPUTTING AUDIO SIGNALS TO AN AUDIO AMPLIFIER
Rear side of AV Selector
To digital audio input
To analog audio input
To digital audio output To analog audio output 
						

							E-29
English
Deutsch
Espa
ñol
Fran
çais
Italiano
Portugu
ês


						

							E-30
BASIC OPERATIONS (Continued)
TURNING THE POWER TO STANDBY
1
Press .
The confirmation display appears.
2
Press E to select "OFF".
3
Press