Fujitsu Fuji Xpro1 Owners Manual

							85
Connections
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1  Connect the supplied USB cable as shown and turn the printer on.
 2  Turn the camera on.  t  USB will be displayed 
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
OK SETFRAMESHEETS
PICTBRIDGE
TOTAL:  
00000
 
R Pictures can be printed from memory cards that has 
been formatted in the camera.
 
R Page size, print quality, and border selections are 
made using the printer.
Printing Selected PicturesPrinting Selected Pictures
 1 Press the selector left or right to dis-
play a picture you wish to print.
 
R To print one copy of the current picture, pro-
ceed directly to Step 3.
 2 Press the selector up or down to 
choose the number of copies (up to 
99).  Repeat steps 1–2 to select ad-
ditional pictures.
 3 Press  MENU/OK to display a confi rma-
tion dialog.
CANCEL
YES
PRINT THESE FRAMES
TOTAL:  
9 SHEETS
 4 Press  MENU/OK to start printing. 
						

							86
Printing Pictures via USB
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE). To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details.
 Printing the DPOF Print Order Printing the DPOF Print Order
To print the print order created with  K PRINT 
ORDER (DPOF) in the playback menu (P 77):
 1 In the PictBridge display, press DISP/ BACK to open the PictBridge menu.
 2 Press the selector up or down to highlight u  PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE 
s
PRINT DPOF
PRINT WITHOUT DATE
 3 Press 
MENU/OK to display a confi rma-
tion dialog.
TOTAL:  9 SHEETS
CANCEL
YES PRINT DPOF  OK?
 4 Press 
MENU/OK to start printing. 
						

							87
Connections
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB cable.
 Creating a DPOF Print Order Creating a DPOF Print Order
The  K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print 
order” for PictBridge-compatible printers or de-
vices that support DPOF.
  DPOF DPOF
DPOF (Digital  Print Order  Format) is stan-
dard that allows pictures to be printed from 
“print orders” stored on the memory card.  
The information in the order includes the 
pictures to be printed and the number of copies of 
each picture.
CANCEL
PRINTING 
						

							88
Printing Pictures via USB
 
■ WITH DATE s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
PLAYBACK MENU
DISP ASPECT
PLAYBACK VOLUME
PRINT ORDER 
(
DPOF )
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH SLIDE SHOW
WITHOUT DATE
RESET ALL WITH DATE s
WITH DATE s : Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the steps below.
 1  Press the selector left or right to dis- play a picture you wish to include in 
or remove from the print order.
 2 Press the selector up or down to choose the number of copies (up 
to 99).  To remove a picture from the 
order, press the selector down until 
the number of copies is 0.
SHEETS
DPOF: 
00001
01PRINT ORDER  (
DPOF )
SETFRAME
Total number of prints
Number of copies
 3 Repeat steps 1–2 to complete the 
print order.  Press MENU/OK to save 
the print order when settings are 
complete, or DISP/BACK to exit with-
out changing the print order.
 4 The total number of prints is dis-played in the monitor.  Press MENU/
OK to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback. 
						

							89
Connections
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must be created as 
described above.
RESET DPOF OK?
CANCEL
YESNO
YES
RESET DPOF OK? 
						

							90
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, 
organized, and printed.  Before proceeding, install the software as described below.  Do 
NOT connect 
the camera to the computer until installation is complete.
 Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 7 (Service Pack 1)/Windows Vista (Service Pack 2)Windows 7 (Service Pack 1)/Windows Vista (Service Pack 2) 1 1Windows XP (Service Pack 3)Windows XP (Service Pack 3) 1 1
CPUCPU3 GHz Pentium 4 or better 3 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22))2 GHz Pentium 4 or better 2 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22))
RAMRAM1 GB or more1 GB or more512 MB or more (1512 MB or more (1 GB or more GB or more 22))
Free disk spaceFree disk space2 GB or more2 GB or more
GPUGPUSupports DirectX 9 or later (recommended)Supports DirectX 9 or later (recommended)Supports DirectX 7 or later (required; performance Supports DirectX 7 or later (required; performance not guaranteed with other GPUs)not guaranteed with other GPUs)
VideoVideo 1024 × 768 pixels or more with 24-bit color or better
OtherOther •  Built-in USB port recommended.  Operation is not guaranteed with other USB ports.
•  .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
•  Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use 
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1  Other versions of Windows are not supported.  Only pre-installed operating systems are supported; operation is not  guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2  Recommended when displaying HD movies.
 2  Start the computer.  Log in to an account with administrator privileges before proceeding. 
						

							91
Connections
Viewing Pictures on a Computer
 3  Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 7/Windows Vista Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click  SETUP.EXE.  A “User Account Control” dialog will then be displayed; 
click Ye s  ( Windows 7) or  Allow ( Windows Vista).
 The installer will start automatically; click Install MyFinePix Studio  and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
  If the Installer Does Not Start Automatically  If the Installer Does Not Start Automatically
If the installer does not start automatically, select  Computer or My Computer from the Start menu, then 
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click  setup or SETUP.EXE.
 4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
 5 Remove the installer CD from the CD-ROM drive when installation is complete.  Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 94). 
						

							92
Viewing Pictures on a Computer
 Macintosh: Installing FinePixViewer Macintosh: Installing FinePixViewer
 1  Confi rm that the computer meets the following system requirements:
CPUCPUPowerPC or Intel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.com/support/digital_cameras/
compatibility/ for more information).  Mac OS X version 10.7 and later not supported.
RAMRAM
256 MB or more (1 GB or more recommended when displaying HD movies)
Free disk spaceFree disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
VideoVideo800 × 600 pixels or more with thousands of colors or better
OtherOther Built-in USB port recommended.  Operation is not guaranteed with other USB ports.
 2 After starting the computer and quitting any applications that may be running, insert the installer 
CD in a CD-ROM drive and double-click  Installer for Mac OS X.
 3 An installer dialog will be displayed; click Installing FinePixViewer to start installation.  Enter an 
administrator name and password when prompted and click  OK, then follow the on-screen in-
structions to install FinePixViewer.  Click Exit to quit the installer when installation is complete.
 
R  To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE CONVERTER is used to view 
RAW images on your computer.
 4 Remove the installer CD from the CD-ROM drive.  Note that you may be unable to remove the CD 
if Safari is running; if necessary, quit Safari before removing the CD.  Store the installer CD in a dry 
location out of direct sunlight in case you need to re-install the software. 
						

							93
Connections
Viewing Pictures on a Computer
 5 Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select Preferences… 
from the Image Capture application menu.  The Image Capture preferences dialog will be displayed; 
choose  Other… in the  When a camera is connected, open  menu, then select FPVBridge in the 
“Applications/FinePixViewer” folder and click Open.  Quit Image Capture.
Mac OS X 10.6 : Connect the camera and turn it on.  Open the “Applications” folder and start Image 
Capture.  The camera will be listed under  DEVICES; select the camera and choose FPVBridge from 
the Connecting this camera opens menu and click Choose.  Quit Image Capture.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 94). 
						

							94
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 14).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to the memory card.  Insert a fresh or 
fully-charged battery before connecting the camera.
 2 Turn the camera off  and connect the supplied USB cable as 
shown, making sure the connectors are fully inserted.  Con-
nect the camera directly to the computer; do not use a USB 
hub or keyboard.
 3 Turn the camera on.  MyFinePix Studio or FinePixViewer will start automatically; follow the on-screen 
instructions to copy pictures to the computer.  To exit without copying pictures, click  Cancel.
 
Q If the software does not start automatically, it may not be correctly installed.  Disconnect the camera and 
reinstall the software.
For more information on using the supplied software, start the application and select the appropriate 
option from the Help menu.