Fujitsu Fuji Xe1 Owners Manual

47
More on Photography and Playback Exposure Compensation Exposure  Compensation
Rotate the exposure compensation dial to adjust exposure when photographing very bright, 
very dark, or high-contrast subjects.  The eff ect is visible in the display.
Exposure compensation indicator
P2000F5 . 620020001F5.6
000100
P200
F
Standard display Detailed display (LCD monitor)
Choose positive values (+) to 
increase exposure
Choose negative values (–) to 
reduce exposure
  Exposure Value (EV) Exposure Value (EV)
The...

48
 Metering Metering
To choose how the camera meters exposure, press the AE button 
to display metering options.  Use the selector to highlight an op-
tion and press AE to select.
ModeModeDescriptionDescription
oo(MULTI)(MULTI) The camera instantly determines exposure based on an analysis of 
composition, color, and brightness distribution.  Recommended in 
most situations.
pp(SPOT)(SPOT)The camera meters lighting conditions in an area at the center of the 
frame equivalent to 2% of the total....

49
More on Photography and Playback  Using the Self-TimerUsing the Self-Timer
Use the timer for self-portraits or to prevent blur caused by camera shake.
 1 Press MENU/OK in shooting mode to display the shooting menu.  Press 
the selector up or down to highlight B  SELF-TIMER and press MENU/
OK.
OFF
3:2F
200PISO SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
SELF-TIMER
EXIT
 2 Press the selector up or down to highlight one of the following op- tions and press...

50
Using the Self-Timer
 4 Press the shutter button the rest of the way down to start the timer.  The display in the monitor shows the number of seconds remaining 
until the shutter is released.  To stop the timer before the picture is 
taken, press DISP/BACK.99
 The self-timer lamp on the front of the camera will blink immediately 
before the picture is taken.  If the two-second timer is selected, the 
self-timer lamp will blink as the timer counts down.
 
R The self-timer turns off    automatically...

51
More on Photography and Playback Film Simulation Film  Simulation
Simulate the eff ects of diff erent kinds of fi lm, including black-and-white (with or without color fi lters).
 1 Press MENU/OK in shooting mode to display the shooting menu.  Press 
the selector up or down to highlight P  FILM SIMULATION and 
press MENU/OK.PISO SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
SELF-TIMER
EXIT
OFF
3:2F
200
 2  Press the selector up or down to highlight one of the...

52
 Bracketing Bracketing
Automatically vary settings over a series of pictures.
 1 Press the DRIVE button to display drive options and press the selector up or down 
to highlight one of the following:
OptionOptionDescriptionDescription
AE BKTAE BKT Press the selector left or right to highlight a bracketing amount.  Each time the 
shutter button is pressed, the camera will take three shots at up to about 6 fps: 
one using the metered value for exposure, the second overexposed by the select-
ed amount,...

53
More on Photography and Playback Multiple Exposures Multiple  Exposures
Create a photograph that combines two exposures.
 1 Select ON for n  MULTIPLE EXPOSURE in the 
shooting menu.
 2  Take the fi rst shot.
 3 Press MENU/OK.  You will be prompt- ed to take the second shot.
 
R To return to Step 2 and retake the fi  rst shot, press 
the selector left.  To save the fi rst shot and exit 
without creating a multiple exposure, press  DISP/
BACK.
 4  Take the second shot.
 5 Press  MENU/OK to create the...

54
 1 Press  the DRIVE button to display 
drive options.
CONTINUOUS6fps3fps
 2 Press the selector up or down to  choose from frame rates of approxi-
mately  6 fps (frames  per second) 
and  3 fps, and press left or right to 
choose the number of shots per 
burst.  Press MENU/OK to proceed 
when settings are complete.
 3 Press the shutter button halfway to  focus.
 4 Press the shutter button the rest of the way down to start shoot-
ing.  Shooting ends when the shut-
ter button is released, the selected...

55
More on Photography and PlaybackContinuous Shooting (Burst Mode)
Viewing Pictures Taken in a Single BurstViewing Pictures Taken in a Single Burst
When a picture taken in continuous shooting mode is dis-
played full-frame, the fi rst picture in the current burst can 
be viewed by pressing the selector down (burst mode play-
back).  Press the selector right to view pictures in the order 
recorded, left to view pictures in reverse order.  Keep the 
selector pressed to scroll rapidly to the desired frame....

56
 1 Press  the DRIVE button to display 
drive options.  Press the selector up 
or down to highlight r (MOTION 
PANORAMA) and press MENU/OK.
MOTION PANORAMA
 2 To select the size of the angle  through which you will pan the 
camera while shooting, press the se-
lector left.  Highlight a size and press MENU/OK.
 3 Press the selector right to view a choice of pan directions.  Highlight 
a pan direction and press MENU/OK.
 4 Press the shutter button all the way down to start recording.  There is no need to...