Fujitsu Fuji Xe1 Owners Manual

7
First Steps
First StepsFirst Steps
 Attaching the Strap Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
 1  Open a strap clip.Use the clip attaching tool to open a strap clip, 
making sure that the tool and clip are in the 
orientations shown.
 
Q Keep the tool in a safe place.  You will need it to 
open the strap clips when removing the strap.
 2  Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening.  Re-
move the tool, using the other hand...

8
Attaching the Strap
 5  Insert the strap.Insert the strap through a protective cover 
and strap clip. 6  Fasten the strap.Fasten the strap as shown.  Repeat Steps 5–6 
for the second eyelet.
 
Q To avoid dropping the camera, be sure the strap is 
correctly secured. 

9
First Steps
 Attaching a Lens Attaching a Lens
Lenses attach as described below.
 
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
 1  Remove the body and rear caps.
Remove the body cap from the camera and 
the rear cap from the lens.
 
Q Do not touch the camera’s internal parts.
 2  Attach the lens.
Place the lens on mount, keeping the marks 
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
 
Q Do not press the lens...

10
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Charge the battery before use.
 1  Place the battery in the charger.Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
 2  Plug the charger in.
Plug the charger into a power outlet.  The 
charging indicator will light.
  The Charging Indicator  The Charging Indicator
The charging indicator shows battery charge sta-...

11
First Steps
 Inserting the Battery and a Memory Card Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC 
memory cards (sold separately).  After charging the battery, insert the battery and memory card as 
described below.
   1  Open the battery-chamber cover.Slide the battery-chamber latch as shown and 
open the battery-chamber cover.
 
Q Do not open the battery-chamber cover when 
the camera is on.  Failure to observe...

12
Inserting the Battery and a Memory Card
   3  Insert the memory card.Holding the memory 
card in the orientation 
shown at right, slide 
it in until it clicks into 
place at the back of 
the slot.
Click
 
Q  Be sure card is in the correct orientation; do not 
insert at an angle or use force.
 
Q  SD/SDHC/SDXC  memo-
ry cards can be locked, 
making it impossible to 
format the card or to 
record or delete images.  
Before inserting a memory card, slide the write-
protect switch to the unlocked...

13
First Steps
Inserting the Battery and a Memory Card
    Removing the Battery and Memory Card  Removing the Battery and Memory Card
Before removing the battery or memory card,  turn 
the camera off   and open the battery-chamber cover.
To remove the battery, press 
the battery latch to the side, 
and slide the battery out of 
the camera as shown.
Battery latch
To remove the memory card, 
press it in and release it slowly.  
The card can then be removed 
by hand.  When a memory card 
is removed, the...

14
Inserting the Battery and a Memory Card
 
■  Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era.  A complete list of approved memory cards is available at  http://www.fujifilm.com/support/digital_
cameras/compatibility/.  Operation is not guaranteed with other cards.  The camera can not be used 
with xD-Picture Cards or MultiMediaCard (MMC) devices.
  QQMemory CardsMemory Cards
•  Do not turn the camera off  or remove the memory card...

15
First Steps
 Turning the Camera on and Off  Turning the Camera on and Off 
Rotate the ON/OFF switch to  ON to turn the camera on.  Select  OFF to turn 
the camera off  .
 
R Press the a button to start playback.  Press the shutter button halfway to 
return to shooting mode.
 
R The camera will turn off    automatically if no operations are performed for the 
length of time selected for M  AUTO POWER OFF (P 85).  To reactivate the 
camera after it has turned off  automatically, press the shutter button...

16
 Basic Setup Basic  Setup
A language-selection dialog is displayed the fi rst time the camera is turned on.  Set up the camera 
as described below (you can reset the clock or change languages at any time using the F DATE/
TIME or L  a options in the setup menu; for information on displaying the setup menu, see 
page 83).
 1  Choose a language.
START MENU
NOSET ENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
 
R Press  DISP/BACK to skip the current step.  Any steps you skip will be...