Fujitsu Fuji Xa2 Instruction Manual

							95
Connections
Location Data
 Recording Location Data with Pictures Recording Location Data with Pictures
To save location data with new pictures:
 1  Download data on your current location from a smartphone (P 94).
 2 Select ON for U  GEOTAGGING SET-UP > GEOTAGGING.
 3  Take pictures. The location data acquired in Step 2 will be added to the new images.
The camera will display the latitude and longitude of the most recently acquired lo-
cation.  In addition, a  i icon will be displayed if location data have been updated 
in the last two hours; if the time elapsed since the last update is more than two 
hours, the i icon will fl ash.  A j icon indicates that no location data are available.
 
R To disable geotagging, select OFF for U  GEOTAGGING SET-UP > GEOTAGGING. To choose whether the 
camera displays the current location, use  U GEOTAGGING SET-UP > LOCATION INFO.
 
Q The camera uses the most recently downloaded data; if you have changed your location since you last took 
a picture, download data for the current location before shooting.  Note that the camera automatically stops 
recording location data three hours after the last update.
 
■  Viewing Location Data
During playback, pictures for which location data exist are indicated by a  k icon.  
Location data are shown for a few seconds each time the picture is displayed.
k icon
100-0001100-0001
N   35° 66’ 55”E   139° 73’ 04”
N   35° 66’ 55”E   139° 73’ 04”P 
						

							96
 Saving Pictures to a Computer Saving Pictures to a Computer
Follow the steps below to save pictures to a computer over a wireless network. Before proceeding, 
install the free FUJIFILM PC AutoSave application to the destination computer and adjust settings as 
desired. Be sure the camera battery is fully charged.
 
R Visit the following website for information on downloading FUJIFILM PC AutoSave and adjusting settings: 
http://app.fujifilm-dsc.com/pc/.
 1  During playback, press MENU/OK to display the playback menu.
 2 Select  s PC AUTO SAVE.
 
R A s PC AUTO SAVE option is also available in the r WIRELESS  TRANSFER menu, 
which can be displayed by pressing the  Fn  ( Wi-Fi) button.
 3  The options shown at right will be displayed; select a destination.
 
R The destination can also be selected using  s PC AUTO SAVE SETTING.
PC-01PC-02PC-03PC-04PC-05
MY-PC
SELECT DESTINATION PC
 4  Follow the on-screen instructions.
 
R Do not turn the camera off    or remove the camera battery or memory card while transfer is in progress.
 
R The camera will turn off    automatically shortly after upload is completed. 
						

							97
Connections
 Viewing Pictures on a Computer Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, 
organized, and printed.  Before proceeding, install the software as described below.  Do 
NOT connect 
the camera to the computer until installation is complete.
 Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio
 1  Confi rm that the computer meets the following system requirements:
Windows 8.1 / Windows 8 / Windows 7 (Service Pack 1) / Windows Vista (Service Pack 2)Windows 8.1 / Windows 8 / Windows 7 (Service Pack 1) / Windows Vista (Service Pack 2) 1 1
CPUCPU3 GHz Pentium 4 or better (2.4 GHz Core 2 Duo or better 3 GHz Pentium 4 or better (2.4 GHz Core 2 Duo or better 22))
RAMRAM1 GB or more1 GB or more
Free disk spaceFree disk space2 GB or more2 GB or more
GPUGPUSupports DirectX 9 or later (recommended)Supports DirectX 9 or later (recommended)
VideoVideo1024 × 768 pixels or more with 24-bit color or better1024 × 768 pixels or more with 24-bit color or better
OtherOther •  Built-in USB port recommended.  Operation is not guaranteed with other USB ports.
•  .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.
•  Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use 
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1  Other versions of Windows are not supported.  Only pre-installed operating systems are supported; operation is not guar- anteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2  Recommended when displaying HD movies.
 2  Start the computer.  Log in to an account with administrator privileges before proceeding. 
						

							98
Viewing Pictures on a Computer
 3  Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
  Windows 8.1/Windows 8/Windows 7/Windows Vista  Windows 8.1/Windows 8/Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click  SETUP.EXE.  A “User Account Control” dialog will then be displayed; 
click Ye s  ( Windows 8.1/Windows 8/Windows 7) or  Allow ( Windows Vista).
 The installer will start automatically; click Install MyFinePix Studio  and follow the on-screen in-
structions to install MyFinePix Studio and RAW FILE CONVERTER.
  If the Installer Does Not Start Automatically  If the Installer Does Not Start Automatically
If the installer does not start automatically, follow the steps below.
•  Windows 8.1/Windows 8: Select  Desktop from the Start screen, then select File Explorer on the desk-
top taskbar and choose PC or Computer in the navigation panel. Double-click the drive containing the 
installer CD and follow the on-screen instructions.
•  Other versions of Windows: Select  Computer from the Start menu, then double-click the FINEPIX CD 
icon to open the FINEPIX CD window and double-click  setup or SETUP.EXE.
 4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-
plete installation.
 5 Remove the installer CD from the CD-ROM drive when installation is complete.  Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 100). 
						

							99
Connections
Viewing Pictures on a Computer
 Macintosh: Installing RAW FILE CONVERTER Macintosh: Installing RAW FILE CONVERTER
RAW FILE CONVERTER is used to view RAW images on your computer.
 1  Confi rm that the computer meets the following system requirements:
CPUCPUIntel (Core 2 Duo or better)
OSOSPre-installed copies of Mac OS X version 10.6.8–10.10 (visit http://www.fujifilm.com/support/
digital_cameras/compatibility/ for more information).
RAMRAM
1 GB or more
Free disk spaceFree disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running
VideoVideo1,024 × 768 pixels or more with 24-bit color or better
 2 After starting the computer and quitting any applications that may be running, insert the installer 
CD in a CD-ROM drive and double-click  SILKYRFCEXInstaller.
 3 Enter an administrator name and password when prompted and click OK, then follow the on-
screen instructions to install.  Click  Exit to quit the installer when installation is complete.
 4 Remove the installer CD from the CD-ROM drive.  Note that you may be unable to remove the CD 
if Safari is running; if necessary, quit Safari before removing the CD.  Store the installer CD in a dry 
location out of direct sunlight in case you need to re-install the software.
Installation is now complete.  Proceed to “Connecting the Camera” ( P 100).
Macintosh: Importing PicturesMacintosh: Importing Pictures
Still images and movies can be imported using Image Capture or other standard Mac OS applications. 
						

							100
Viewing Pictures on a Computer
 Connecting the Camera Connecting the Camera
 1  Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 13).
 
R Windows users may require the Windows CD when starting the software for the fi rst time.
 
Q Loss of power during transfer could result in loss of data or damage to the memory card.  Insert a fresh or 
fully-charged battery before connecting the camera.
 2  Turn the camera off   and connect a USB cable (available sepa-
rately from third-party suppliers) as shown, making sure the 
connectors are fully inserted.  Connect the camera directly to 
the computer; do not use a USB hub or keyboard.
 
Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer.
 3 Turn the camera on.
 4 Upload pictures in MyFinePix Studio and follow the on-screen instructions to copy pictures to the 
computer.  To exit without copying pictures, click  Cancel.
For more information on using the supplied software, start the application and select the appropriate 
option from the Help menu. 
						

							101
Connections
Viewing Pictures on a Computer
 
Q If a memory card containing a large number of images is inserted, there may be a delay before the software 
starts and you may be unable to import or save images.  Use a memory card reader to transfer pictures.
 
Q Make sure that the computer does not display a message stating that copying is in progress and that the indi-
cator lamp is out before turning the camera off   or disconnecting the USB cable (if the number of images cop-
ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display).  
Failure to observe this precaution could result in loss of data or damage to the memory card.
 
Q Disconnect the camera before inserting or removing memory cards.
 
Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software 
in the same way as on a standalone computer.
 
Q The user bears all applicable fees charged by the phone company or Internet service provider when using 
services that require an Internet connection.
  Disconnecting the Camera  Disconnecting the Camera
After confi rming that the indicator lamp is out, turn the camera off    and disconnect the USB cable.
  Uninstalling the Supplied Software  Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation.  After 
quitting the software and disconnecting the camera, drag “RAW FILE CONVERTER EX 2.0 powered by SILKYPIX” 
from “Applications” into the Trash and select  Empty Trash in the Finder menu (Macintosh), or open the control 
panel and use “Programs and Features” ( Windows) to uninstall MyFinePix Studio.  Under Windows, one or more 
confi rmation dialogs may be displayed; read the contents carefully before clicking  OK. 
						

							102
Printing Pictures via USBPrinting Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and 
pictures can be printed without fi  rst being copied to a computer.  Note that depending on the 
printer, not all the functions described below may be supported.
 Connecting the Camera Connecting the Camera
 1 Connect a USB cable (available separately from third-party suppliers) as shown and turn 
the printer on.
 
Q The USB cable must be no more than 1.5 m (4.9 ft.) 
long and be suitable for data transfer.
 2  Turn the camera on.  t  USB will be displayed 
in the monitor, followed by the PictBridge dis-
play shown below at right.
USB
00
PICTBRIDGE
TOTAL: 00000
SHEETS
SETOK FRAME
 
R Pictures can be printed from memory cards that has 
been formatted in the camera.
 
R Page size, print quality, and border selections are 
made using the printer. 
						

							103
Connections
Printing Pictures via USB
Printing Selected PicturesPrinting Selected Pictures
 1 Press the selector left or right to dis-
play a picture you wish to print.
 
R To print one copy of the current picture, pro-
ceed directly to Step 3.
 2 Press the selector up or down to 
choose the number of copies (up to 
99).  Repeat steps 1–2 to select ad-
ditional pictures.
 3 Press  MENU/OK to display a confi rma-
tion dialog.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
CANCELYES
 4 Press  MENU/OK to start printing.
  Printing the Date of Recording  Printing the Date of Recording
To print the date of recording on pictures, press 
DISP/BACK in the PictBridge display and select PRINT 
WITH DATE 
s (to print pictures without the date of 
recording, select PRINT WITHOUT DATE).  To ensure 
that the date is correct, set the camera clock before 
taking pictures.  Some printers do not support date 
printing.  See the printer manual for details. 
						

							104
Printing Pictures via USB
 Printing the DPOF Print Order Printing the DPOF Print Order
To print the print order created with K PRINT 
ORDER (DPOF) in the playback menu (P 82):
 1 In the PictBridge display, press DISP/ BACK to open the PictBridge menu.
 2 Press the selector up or down to highlight u  PRINT DPOF.
PICTBRIDGE
PRINT WITH DATE 
sPRINT WITHOUT DATE PRINT DPOF
 3 Press  MENU/OK to display a confi rma-
tion dialog.
CANCELYES PRINT DPOF OK?
TOTAL: 
9 SHEETS
 4 Press  MENU/OK to start printing.
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB cable.
CANCEL
PRINTING