Fujitsu Fuji Xa2 Instruction Manual
Have a look at the manual Fujitsu Fuji Xa2 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
85 Menus The Setup Menu b b SOUND SET-UP SOUND SET-UP Adjust sound settings. OptionOptionDescriptionDescription OPERATION VOL.OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF (mute) to disable control sounds. PLAYBACK VOLUME PLAYBACK VOLUME Adjust the volume for movie playback. A A SCREEN SET-UP SCREEN SET-UP Adjust display settings. OptionOptionDescriptionDescription IMAGE DISP.IMAGE DISP. Choose how long images are displayed after shooting. Colors may diff er slightly from those in the fi nal image and “noise” mottling may be visible at high sensitivities. OptionOptionDescriptionDescription CONTINUOUSCONTINUOUS Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the sub-command dial; press again to cancel zoom. 1.5 SEC1.5 SEC Pictures are displayed for 1.5 seconds (1.5 SEC) or 0.5 seconds (0.5 SEC) or until the shutter button is pressed halfway. 0.5 SEC0.5 SEC OFFOFFPictures are not displayed after shooting (does not apply to pictures taken using bracketing or advanced fi lters). LCD BRIGHTNESS LCD BRIGHTNESS Control the brightness of the display. MONITOR SUNLIGHT MODE MONITOR SUNLIGHT MODE Select ON to make the display in the monitor easier to read in bright light ( P 4). AUTOROTATE PB AUTOROTATE PBChoose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. BACKGROUND COLORBACKGROUND COLORChoose a color scheme.
86 The Setup Menu I I FOCUS RING FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance. Z Z POWER MANAGEMENT POWER MANAGEMENT Adjust power management settings. OptionOptionDescriptionDescription AUTO POWER OFF AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Note that in some situations the camera turns off automatically even when OFF is selected. QUICK START MODE QUICK START MODE Select ON to reduce the time needed to restart the camera after it has been turned off (P 17). B B FRAME NO. FRAME NO. New pictures are stored in image fi les named using a four-digit fi le number assigned by adding one to the last fi le number used. The fi le number is displayed during playback as shown at right. B FRAME NO. con- trols whether fi le numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. Frame number 100-0001 Directory number File number OptionOptionDescriptionDescription CONTINUOUSCONTINUOUS Numbering continues from the last fi le number used or the fi rst available fi le number, whichever is higher. Choose this option to reduce the number of pictures with duplicate fi le names. RENEWRENEW Numbering is reset to 0001 after formatting or when a new memory card is inserted. R If the frame number reaches 999-9999, the shutter release will be disabled ( P 122). R Selecting R RESET (P 84) sets B FRAME NO. to CONTINUOUS but does not reset the fi le number. R Frame numbers for pictures taken with other cameras may diff er.
87 Menus The Setup Menu U U DATE STAMP DATE STAMP Stamp the time and/or date of recording on photographs as they are taken. • R+S: Stamp new photographs with the date and time of recording. • R: Stamp new photographs with the date of recording. • OFF: Do not stamp the time and date on new photographs. Q Time and date stamps can not be deleted. Turn DATE STAMP off to prevent time and date stamps appearing on new pho- tographs. Q If the camera clock is not set, you will be prompted to set the clock to the current date and time ( P 18). Q We recommend that you turn the DPOF “print date” option off when printing images with a time and date stamp (P 104). Q Time and date stamps do not appear on movies and RAW images. VV SENSOR CLEANING SENSOR CLEANING Remove dust from the camera image sensor. • OK: Clean sensor immediately (P xi). • WHEN SWITCHED ON: If this option is selected, sensor cleaning will be performed when the camera turns on. • WHEN SWITCHED OFF: If this option is selected, sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode). R Dust that can not be removed using sensor cleaning can be removed manually ( P 114). M M FOCUS SCALE UNITS FOCUS SCALE UNITS Choose the units used for the focus distance indicator ( P 51). SS CUSTOM RESET CUSTOM RESET Reset all settings for mode C. A confi rmation dialog will be displayed, press the selector up or down to highlight OK and press MENU/OK.
88 The Setup Menu UU GEOTAGGING SET-UP GEOTAGGING SET-UP Access the following location data options ( P 94). OptionOptionDescriptionDescription rr LOCATION INFO SEARCH LOCATION INFO SEARCHDownload location data from a smartphone. GEOTAGGINGGEOTAGGING Choose whether to save location data with pictures. LOCATION INFOLOCATION INFODisplay locatin data. r r WIRELESS SETTINGS WIRELESS SETTINGS Adjust settings for connection to a wireless network. OptionOptionDescriptionDescription GENERAL SETTINGSGENERAL SETTINGS Choose NAME a name to identify the camera on the wireless network (the camera is assigned a unique name by default) or select RESET WIRELESS SETTINGS to restore default settings. RESIZE IMAGE FOR RESIZE IMAGE FOR SMARTPHONE SMARTPHONE HHChoose ON (the default setting, recommended in most circumstances) to resize larger images to H for upload to smartphones, OFF to upload images at their original size. Resizing applies only to the copy uploaded to the smartphone; the original is not aff ected. PC AUTO SAVE SETTINGSPC AUTO SAVE SETTINGSChoose DELETE REGISTERED DESTINATION PC to remove selected destinations, DETAILS OF PRE- VIOUS CONNECTION to view computers to which the camera has recently connected. ss PC AUTO SAVE SETTING PC AUTO SAVE SETTING Choose a destination for images uploaded using s PC AUTO SAVE. For more information, visit http://app.fujifilm-dsc.com/pc. VV instax PRINTER CONNECTION SETTING instax PRINTER CONNECTION SETTING Adjust settings for connection to optional FUJIFILM instax SHARE printers ( P 107).
89 Menus The Setup Menu K K FORMAT FORMAT To format the memory card: 1 Highlight K FORMAT in the setup menu and press MENU/OK. 2 A confi rmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK. Q All data—including protected pictures—will be deleted from the memory card. Be sure important fi les have been copied to a computer or other storage device. Q Do not open the battery-chamber cover during formatting. SET FORMAT FORMAT OK? ERASE ALL DATA OK CANCEL
90 Factory Defaults Factory Defaults The factory default settings for the options in the shooting and setup menus are listed below. With the exceptions of F DATE/TIME, N TIME DIFFERENCE and A SCREEN SET-UP > BACKGROUND COLOR , these settings can be restored using the R RESET option in the setup menu. ■ Shooting Menu MenuMenuDefaultDefault A SCENE POSITION h PORTRAIT A Adv. MODE G ADVANCED FILTER N ISO AUTO (in S mode) O IMAGE SIZE O 3 : 2 T IMAGE QUALITY FINE U DYNAMIC RANGE AUTO P FILM SIMULATION c PROVIA/STANDARD X FILM SIMULATION BKT FILM 1 c PROVIA/STANDARD FILM 2 d Velvia/VIVID FILM 3 e ASTIA/SOFT B SELF-TIMER OFF f COLOR (0) MID q SHARPNESS (0) STANDARD r HIGHLIGHT TONE (0) STANDARD s SHADOW TONE (0) STANDARD h NOISE REDUCTION (0) STANDARD K LONG EXPOSURE NR ON K CUSTOM SET — F FUNCTION (Fn) SETTING N ISO v DISP. CUSTOM SETTING All selected itemsMenuMenuDefaultDefault c FRAMING GUIDELINE F GRID 9 l MOUNT ADAPTOR SETTING LENS 5 (50mm) m SHOOT WITHOUT LENS OFF L IS MODE L CONTINUOUS + MOTION C PHOTOMETRY o MULTI b FACE DETECTION ON (in S mode) y EYE DETECTION AF u AUTO (in S mode) F FOCUS MODE t AREA c MF ASSIST FOCUS PEAK HIGHLIGHT (HIGH) C AF ILLUMINATOR ON v AE/AF-LOCK BUTTON AE LOCK ONLY W MOVIE SET-UP MOVIE MODE i 1920 × 1080 30 fps FOCUS MODE u CONTINUOUS p FLASH MODE AUTO I FLASH COMPENSATION ±0 B RED EYE REMOVAL ON n SAVE ORG IMAGE OFF WHITE BALANCE AUTO
91 Menus Factory Defaults ■ Setup Menu MenuMenuDefaultDefault F DATE/TIME — N TIME DIFFERENCE — Q a — R RESET — o SILENT MODE OFF b SOUND SET-UP OPERATION VOL. c PLAYBACK VOLUME 7 A SCREEN SET-UP IMAGE DISP. OFF LCD BRIGHTNESS 0 MONITOR SUNLIGHT MODE OFF AUTOROTATE PB ON BACKGROUND COLOR — I FOCUS RING X CW Z POWER MANAGEMENT AUTO POWER OFF 2 MIN QUICK START MODE OFF B FRAME NO. CONTINUOUS U DATE STAMP OFF V SENSOR CLEANING OK — WHEN SWITCHED ON OFF WHEN SWITCHED OFF ON M FOCUS SCALE UNITS METERS S CUSTOM RESET —MenuMenuDefaultDefault U GEOTAGGING SET-UP r LOCATION INFO SEARCH — GEOTAGGING OFF LOCATION INFO ON r WIRELESS SETTINGS GENERAL SETTINGS — RESIZE IMAGE FOR SMARTPHONE HH ON PC AUTO SAVE SETTINGS — s PC AUTO SAVE SETTING — V instax PRINTER CONNECTION SETTING — K FORMAT —
92 ConnectionsConnections Uploading Pictures Uploading Pictures Connect via a wireless network to upload pictures to smartphones or tablets or to remotely browse the pictures on the camera and select images for download. Before proceeding, download the free FUJIFILM Camera Application app and install it on your smartphone or tablet. To download the app or view information on using FUJIFILM Camera Application, visit http://app.fujifilm-dsc.com/app. To upload pictures or view pictures remotely: 1 Press MENU/OK during playback to display the playback menu. 2 Select r WIRELESS TRANSFER. R The r WIRELESS TRANSFER menu can also be displayed by pressing the Fn ( Wi-Fi) button.SEND INDIVIDUAL IMAGESEND SELECTED MULTIPLE IMAGES VIEW & OBTAIN IMAGES ON r WIRELESS TRANSFER 3 Choose from the following options: OptionOptionDescriptionDescription VIEW & OBTAIN IMAGES VIEW & OBTAIN IMAGES ON ON rr Use the smartphone to view the photos and movies on the camera and select pictures for download. SEND INDIVIDUAL IMAGESEND INDIVIDUAL IMAGE Upload the current picture to the smartphone. SEND SELECTED MULTIPLE SEND SELECTED MULTIPLE IMAGESIMAGESUpload selected pictures to the smartphone. R Pictures can also be uploaded to devices running the FUJIFILM Photo Receiver app. R Be sure that the battery is charged before beginning upload. Do not remove the battery, turn the camera off , or remove the memory card until upload is complete. R If you are unable to upload still pictures, check the smartphone’s settings.
93 Connections Uploading Pictures R Personal information may be revealed by the titles, dates, location data, and other information included with pictures. Verify the destination before beginning upload. R The time needed for upload varies with fi le size and the distance to the destination. At default settings (rec- ommended), ON is selected for r WIRELESS SETTING > RESIZE IMAGE FOR SMARTPHONE H (P 88) and images are resized to H for upload. R RAW images can not be uploaded. The camera may be unable to upload images created or modifi ed on other devices. R Movies can not be uploaded using the SEND INDIVIDUAL IMAGE and SEND SELECTED MULTIPLE IMAGES options. R Upload may not succeed depending on signal quality. R The camera will end the connection to the smartphone automatically if no operations are performed for a set period.
94 Location Data Location Data The U GEOTAGGING SET-UP > r LOCATION INFO SEARCH option in the setup menu can be used to download location data from smartphones running the free FUJIFILM Camera Application app. The location data can then be added to pictures as they are taken. To download the app or view informa- tion on using FUJIFILM Camera Application, visit http://app.fujifilm-dsc.com/app . Downloading Location Data Downloading Location Data To download data for your current location from a smartphone: 1 Press MENU/OK to display the menu for the current mode. 2 Press the selector left to highlight the tab for the current menu. 3 Press the selector down to highlight the tab containing the desired option.1 DATE/TIME SET-UP TIME DIFFERENCE RESET SILENT MODE SOUND SET-UP SCREEN SET-UP EXIT OFF ENGLISH 1 Ta b 4 Press the selector right to place the cursor in the menu. 5 Select U GEOTAGGING SET-UP > r LOCATION INFO SEARCH. Note that the accuracy of data will vary from device to device.