Fujitsu Fuji Xa2 Instruction Manual

							Owner’s Manual
Thank you for your purchase of this product.  This 
manual describes how to use your FUJIFILM X-A2 
digital camera and install the supplied software.  Be 
sure that you have read and understood its contents 
before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Before You BeginFirst Steps
Basic Photography  and Playback
Basic Movie Recording  and Playback
The Q (Quick Menu) Button More on Photography  and Playback
Menus
Connections
Technical Notes
Troubleshooting
ENBL00004698-200
Appendix 
						

							ii
 For Your Safety For  Your  Safety
• Read Instructions : All the safety and operating instructions 
should be read before the appliance is operated.
•  Retain Instructions: The safety and operating instructions 
should be retained for future reference.
•  Heed Warnings : All warnings on the appliance and in the 
operating instructions should be adhered to.
•  Follow Instructions: All operating and use instructions 
should be followed.
InstallationInstallation
Power Sources : This video product should be operated only 
from the type of power source indicated on the marking la-
bel.    If you are not sure of the type of power supply to your 
home, consult your appliance dealer or local power com-
pany.    For video products intended to operate from battery 
power, or other sources, refer to the operating instructions.
Grounding or Polarization: This video product is equipped 
with a polarized alternating-current line plug (a plug having 
one blade wider than the other).    This plug will fi t into the 
power outlet only one way.    This is a safety feature.    If you 
are unable to insert the plug fully into the outlet, try revers-
ing the plug.    If the plug should still fail to fi t, contact your 
electrician to replace your obsolete outlet.    Do not defeat 
the safety purpose of the polarized plug.
Alternate Warnings: This video product is equipped with 
a three-wire grounding-type plug, a plug having a third 
(grounding) pin.    This plug will only fi t into a grounding-
type power outlet.    This is a safety feature.    If you are unable 
to insert the plug into the outlet, contact your electrician to 
replace your obsolete outlet.    Do not defeat the safety pur-
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension 
cords as this can result in a risk of fi re or electric shock.
Ventilation: Slots and openings in the cabinet are provided 
for ventilation, to ensure reliable operation of the video 
product and to protect it from overheating, and these open-
ings must not be blocked or covered.    The openings should 
never be blocked by placing the video product on a bed, 
sofa, rug, or other similar surface. This video product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ventilation 
is provided or the manufacturer’s instructions have been 
adhered to.    This video product should never be placed near 
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by 
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near wa-
ter—for example, near a bath tub, wash bowl, kitchen sink, 
or laundry tub, in a wet basement, or near a swimming pool, 
and the like.
Power-Cord Protection
: Power-supply cords should be routed 
so that they are not likely to be walked on or pinched by 
items placed upon or against them, paying particular at-
tention to cords at plugs, convenience receptacles, and the 
point where they exit from the appliance.
Accessories: Do not place this video product on an unstable 
cart, stand, tripod, bracket, or table.    The video product may 
fall, causing serious injury to a child or adult, and serious 
damage to the appliance.    Use only with a cart, stand, tri-
pod, bracket, or table recommended by the manufacturer, or 
sold with the video product.    Any mounting of the appliance 
should follow the manufacturer’s instructions, and should use 
a mounting accessory recommended by the manufacturer.
An appliance and cart combination 
should be moved with care.    Quick 
stops, excessive force, and uneven 
surfaces may cause the appliance 
and cart combination to overturn.
AntennasAntennas
Outdoor Antenna Grounding: If an outside antenna or cable 
system is connected to the video product, be sure the anten-
na or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.    Sec-
tion 810 of the National Electrical Code, ANSI/NFPA No. 70, 
provides information with respect to proper grounding of the  mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to grounding 
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING 
AS PER NATIONAL ELECTRICAL CODE
Antenna Lead 
in Wire
Ground Clamp
Grounding Conductors 
(NEC SECTION 810-21)
Power Service Grounding Electrode 
System (NEC ART 250. PART H) Antenna 
Discharge Unit 
(NEC SECTION 
810-20)
Electric Service 
Equipment
Ground Clamps
Power Lines: An outside antenna system should not be lo-
cated in the vicinity of overhead power lines or other electric 
light or power circuits, or where it can fall into such power 
lines or circuits.    When installing an outside antenna system, 
extreme care should be taken to keep from touching such 
power lines or circuits as contact with them might be fatal.
UseUse
Cleaning: Unplug this video product from the wall outlet be-
fore cleaning.    Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this 
video product through openings as they may touch dangerous 
voltage points or short out parts that could result in a fi re or elec-
tric shock.  Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product re-
ceiver during a lightning storm, or when it is left unattended 
and unused for long periods of time, unplug it from the wall 
outlet and disconnect the antenna or cable system.  This will 
prevent damage to the video product due to lightning and 
power-line surges.
IMPORTANT SAFETY INSTRUCTIONS 
						

							iii
For Your Safety
ServiceService
Servicing: Do not attempt to service this video product 
yourself as opening or removing covers may expose you to 
dangerous voltage or other hazards.    Refer all servicing to 
qualifi ed service personnel.
Damage Requiring Service: Unplug this video product from 
the wall outlet and refer servicing to qualifi ed service per-
sonnel under the following conditions:
•  When the power-supply cord or plug is damaged
• If liquid has been spilled, or objects have fallen into the  video product.
•  If the video product has been exposed to rain or water.
•  If the video product has been dropped or the cabinet has  been damaged.
If the video product does not operate normally follow the 
operating instructions.    Adjust only those controls that are 
covered by the operating instructions as an improper adjust-
ment of other controls may result in damage and will often 
require extensive work by a qualifi ed technician to restore 
the video product to its normal operation.
When the video product exhibits a distinct change in perfor-
mance — this indicates a need for service.
Replacement Parts: When replacement parts are required, 
be sure the service technician has used replacement parts 
specifi ed by the manufacturer or have the same character-
istics as the original part.    Unauthorized substitutions may 
result in fi re, electric shock or other hazards.
Safety Check: Upon completion of any service or repairs to 
this video product, ask the service technician to perform 
safety checks to determine that the video product is in 
proper operating condition.Be sure to read these notes before use
Safety Notes•  Make sure that you use your camera correctly.    Read these  safety notes and your  Owner’s Manual carefully before use.
•  After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indi-
cate the severity of the injury or damage that can result if the 
information indicated by the icon is ignored and the product 
is used incorrectly as a result.
WARNING This icon indicates that death or seri-
ous injury can result if the information 
is ignored.
CAUTIONThis icon indicates that personal injury 
or material damage can result if the in-
formation is ignored.
The icons shown below are used to indicate the nature of the 
instructions which are to be observed.
Triangular icons tell you that this information re-
quires attention (“Important”).
Circular icons with a diagonal bar tell you that the 
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an 
action that must be performed (“Required”).
  WARNINGWARNING
Unplug 
from power  socket
If a problem arises, turn the camera off  , remove the 
battery, and disconnect and unplug the AC power 
adapter.  Continued use of the camera when it 
is emitting smoke, is emitting any unusual odor, 
or is in any other abnormal state can cause a fi re 
or electric shock.  Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the 
camera.  If water or foreign objects get inside the 
camera, turn the camera off  , remove the battery, 
and disconnect and unplug the AC power adapt-
er.  Continued use of the camera can cause a fi re 
or electric shock.  Contact your FUJIFILM dealer.
  WARNINGWARNING
Do not use in 
the bathroom  or showerDo not use the camera in the bathroom or shower.   
This can cause a fi re or electric shock.
Do not disas- semble
Never attempt to change or take apart the camera 
(never open the case).   Failure to observe this pre-
caution can cause fi re or electric shock.
Do not touch 
internal parts
Should the case break open as the result of a fall or 
other accident, do not touch the exposed parts.   Fail-
ure to observe this precaution could result in elec-
tric shock or in injury from touching the damaged 
parts.  Remove the battery immediately, taking 
care to avoid injury or electric shock, and take the 
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the con-
nection cord and do not place heavy objects on the 
connection cord.   These actions could damage the 
cord and cause a fi re or electric shock.  If the cord 
is damaged, contact your  FUJIFILM dealer.
Do not place the camera on an unstable surface.   This 
can cause the camera to fall or tip over and cause 
injury.
Never attempt to take pictures while in motion.   Do 
not use the camera while walking or driving.  This 
can result in you falling down or being involved in 
a traffi   c accident.
Do not touch any metal parts of the camera during 
a thunderstorm.   This can cause an electric shock 
due to induced current from the lightning dis-
charge.
Do not use the battery except as specifi  ed.   Load the 
battery as shown by the indicator.
Do not heat, change or take apart the battery.   Do not 
drop or subject the battery to impacts.  Do not store 
the battery with metallic products.  Any of these ac-
tions can cause the battery to burst or leak and 
cause fi re or injury as a result. 
						

							iv
For Your Safety
  WARNINGWARNINGUse only batteries or AC power adapters specifi ed for 
use with this camera.  Do not use voltages other than 
the power supply voltage shown.   The use of other 
power sources can cause a fi re.
If the battery leaks and fl  uid gets in contact with your 
eyes, skin or clothing, fl ush the aff ected area with 
clean water and seek medical attention or call an 
emergency number right away.
Do not use the charger to charge batteries other than 
those specifi ed here.  The supplied charger is for 
use only with batteries of the type supplied with 
the camera.  Using the charger to charge conven-
tional batteries or other types of rechargeable 
batteries can cause the battery to leak, overheat 
or burst.
Do not use in the presence of fl ammable objects, ex-
plosive gases, or dust.
When carrying the battery, install it in a digital cam-
era or keep it in the hard case.   When storing the bat-
tery, keep it in the hard case.   When discarding, cover 
the battery terminals with insulation tape.   Contact 
with other metallic objects or batteries could 
cause the battery to ignite or burst.
Keep memory cards out of the reach of small children.  
Because memory cards are small, they can be 
swallowed by children.  Be sure to store memory 
cards out of the reach of small children.  If a child 
swallows a memory card, seek medical attention 
or call an emergency number.
  CAUTIONCAUTIONDo not use this camera in locations aff  ected by oil 
fumes, steam, humidity or dust.   This can cause a 
fi re or electric shock.
Do not leave this camera in places subject to extremely 
high temperatures.  Do not leave the camera in 
locations such as a sealed vehicle or in direct sun-
light.  This can cause a fi re.
  CAUTIONCAUTIONKeep out of the reach of small children.  This product 
could cause injury in the hands of a child.
Do not place heavy objects on the camera.   This can 
cause the heavy object to tip over or fall and 
cause injury.
Do not move the camera while the AC power adapter 
is still connected.  Do not pull on the connection cord 
to disconnect the AC power adapter.   This can dam-
age the power cord or cables and cause a fi re or 
electric shock.
Do not cover or wrap the camera or the AC power 
adapter in a cloth or blanket.  This can cause heat 
to build up and distort the casing or cause a fi re.
When you are cleaning the camera or you do not plan 
to use the camera for an extended period, remove 
the battery and disconnect and unplug the AC power 
adapter.  Failure to do so can cause a fi re or elec-
tric shock.
When charging ends, unplug the charger from the 
power socket.   Leaving the charger plugged into 
the power socket can cause a fi re.
Using a fl ash too close to a person’s eyes may tempo-
rarily aff  ect the eyesight.  Take particular care when 
photographing infants and young children.
When a memory card is removed, the card could come 
out of the slot too quickly.  Use your fi nger to hold it 
and gently release the card.   Injury could result to 
those struck by the ejected card.
Request regular internal testing and cleaning for 
your camera.  Build-up of dust in your camera 
can cause a fi re or electric shock.  Contact your 
FUJIFILM dealer to request internal cleaning every 
two years.  Please note that this service is not free 
of charge.
Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.
 The Battery and Power Supply
Note : Check the type of battery used in your camera and 
read the appropriate sections .
The following describes the proper use of batteries and how 
to prolong their life.    Incorrect use can shorten battery life or 
cause leakage, overheating, fi re, or explosion.
Li-ion BatteriesLi-ion Batteries
Read this section if your camera uses a rechargeable 
Li-ion battery.
The battery is not charged at shipment.    Charge the battery 
before use.    Keep the battery in its case when not in use.
 
■ Notes on the Battery
The battery gradually loses its charge when not in use.  
Charge the battery one or two days before use.
Battery life can be extended by turning the camera off   when 
not in use.
Battery capacity decreases at low temperatures; a depleted 
battery may not function at when cold.    Keep a fully charged 
spare battery in a warm place and exchange as necessary, 
or keep the battery in your pocket or other warm place and 
insert it in the camera only when shooting.    Do not place 
the battery in direct contact with hand warmers or other 
heating devices.
 
■  Charging the Battery
Charge the battery in the supplied battery charger.    Charg-
ing times will increase at ambient temperatures below 
+10 °C (+50 °F) or above +35 °C (+95 °F).    Do not attempt to 
charge the battery at temperatures above 40 °C (+104 °F); at 
temperatures below 0 °C (+32 °F), the battery will not charge.
Do not attempt to recharge a fully charged battery.  The battery 
does not however need to be fully discharged before charging.
The battery may be warm to the touch immediately after 
charging or use.  This is normal.
 
■ Battery Life
At normal temperatures, the battery can be recharged about 
300 times.  A noticeable decrease in the length of time the 
battery will hold a charge indicates that it has reached the 
end of its service life and should be replaced. 
						

							v
For Your Safety
 
■ Storage
Performance may be impaired if the battery is left unused 
for extended periods when fully charged.    Run the battery 
fl at before storing it.
If the camera will not be used for an extended period, re-
move the battery and store it in a dry place with an ambient 
temperature of from +15 °C to +25 °C (+59 °F to +77 °F).    Do 
not store in locations exposed to extremes of temperature.
 
■ Cautions: Handling the Battery
•  Do not transport or store with metal objects such as neck- laces or hairpins.
•  Do not expose to fl ame or heat.
•  Do not disassemble or modify.
•  Use with designated chargers only.
•  Dispose of used batteries promptly.
•  Do not drop or subject to strong physical shocks.
•  Do not expose to water.
•  Keep the terminals clean.
•  The battery and camera body may become warm to the  touch after extended use.  This is normal.
 
■ Disposal
Dispose of used batteries in accord with local regulations.
AC Power Adapters (Available Separately)AC Power Adapters (Available Separately)
Use only FUJIFILM AC power adapters designated for use 
with this camera.  Other adapters could damage the camera.
•  The AC power adapter is for indoor use only.
•  Be sure the DC plug is securely connected to the camera.
• Turn the camera off  before disconnecting the adapter.   Disconnect the adapter by the plug, not the cable.
•  Do not use with other devices.
•  Do not disassemble.
•  Do not expose to high heat and humidity.
•  Do not subject to strong physical shocks.
•  The adapter may hum or become hot to the touch during  use.  This is normal.
•  If the adapter causes radio interference, reorient or relocate  the receiving antenna.
Using the Camera
•  Do not aim the camera at extremely bright light sources,  such as the sun in a cloudless sky.  Failure to observe this 
precaution could damage the camera image sensor.
•  Strong sunlight focused through the viewfi nder may dam- age the panel of electronic viewfi nder (EVF).  Do not aim 
the electronic viewfi nder at the sun.
Take Test ShotsTake Test Shots
Before taking photographs on important occasions (such as 
at weddings or before taking the camera on a trip), take a 
test shot and view the results to ensure that the camera is 
functioning normally.  FUJIFILM Corporation can not accept 
liability for damages or lost profi ts incurred as a result of 
product malfunction.
Notes on CopyrightNotes on Copyright
Unless intended solely for personal use, images recorded us-
ing your digital camera system cannot be used in ways that 
infringe copyright laws without the consent of the owner.  
Note that some restrictions apply to the photographing of 
stage performances, entertainments, and exhibits, even 
when intended purely for personal use.  Users are also asked 
to note that the transfer of memory cards containing images 
or data protected under copyright laws is only permissible 
within the restrictions imposed by those copyright laws.
HandlingHandling
To ensure that images are recorded correctly, do not subject 
the camera to impact or physical shocks while images are 
being recorded.
Liquid CrystalLiquid Crystal
In the event that the display is damaged, care should be 
taken to avoid contact with liquid crystal.  Take the urgent 
action indicated should any of the following situations arise:
•  If liquid crystal comes in contact with your skin , clean the 
area with a cloth and then wash thoroughly with soap and 
running water.
•  If liquid crystal enters your eyes , fl ush the aff ected eye with 
clean water for at least 15 minutes and then seek medical 
assistance.
•  If liquid crystal is swallowed , rinse your mouth thoroughly 
with water.  Drink large quantities of water and induce 
vomiting, then seek medical assistance.
Although the display is manufactured using extremely high-
precision technology, it may contain pixels that are always lit 
or that do not light.  This is not a malfunction, and images 
recorded with the product are unaff  ected.
Trademark InformationTrademark Information
xD-Picture Card and E are trademarks of FUJIFILM 
Corporation.  The typefaces included herein are solely devel-
oped by DynaComware Taiwan Inc.  Macintosh, QuickTime, 
and Mac OS are trademarks of Apple Inc. in the U.S.A.  and 
other countries.  Windows 8,  Windows 7, Windows Vista, and 
the Windows logo are trademarks of the Microsoft group of 
companies.  Wi-Fi® and Wi-Fi Protected Setup® are registered 
trademarks of the Wi-Fi Alliance.  Adobe and Adobe Reader 
are either trademarks or registered trademarks of Adobe 
Systems Incorporated in the U.S.A.  and/or other countries.  
The SDHC and SDXC logos are trademarks of SD-3C, LLC.  
The HDMI logo is a trademark.  YouTube is a trademark of 
Google Inc.  All other trade names mentioned in this manual 
are the trademarks or registered trademarks of their respec-
tive owners.
Electrical InterferenceElectrical Interference
This camera may interfere with hospital or aviation equip-
ment.  Consult with hospital or airline staff  before using the 
camera in a hospital or on an aircraft. 
						

							vi
For Your Safety
Color Television SystemsColor Television Systems
NTSC (National Television System Committee) is a color tele-
vision telecasting specifi cation adopted mainly in the U.S.A., 
Canada, and Japan.  PAL (Phase Alternation by Line) is a color 
television system adopted mainly in European countries and 
China.
Electrical InterferenceElectrical Interference
Exif Print is a newly revised digital camera fi le format in 
which information stored with photographs is used for opti-
mal color reproduction during printing.
IMPORTANT NOTICE: Read Before Using the Software
Direct or indirect export, in whole or in part, of licensed soft-
ware without the permission of the applicable governing 
bodies is prohibited.
NOTICESTo prevent fi re or shock hazard, do not expose the unit 
to rain or moisture.
Please read the “Safety Notes” and make sure you un-
derstand them before using the camera.
Perchlorate Material—special handling may apply.  See 
http://www.dtsc.ca.gov/hazardouswaste/perchlorate .
For Customers in the U. S. A.For Customers in the U. S. A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Contains IC : 7736B-02000002
Contains FCC ID : W2Z-02000002
FCC Statement: This device complies with Part 15 of the FCC 
Rules.  Operation is subject to the following two conditions: 
(1)  This device may not cause harmful interference, and 
(2) this device must accept any interference received, includ-
ing interference that may cause undesired operation.
CAUTION: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed to pro-
vide reasonable protection against harmful interference in a 
residential installation.  This equipment generates, uses, and 
can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful 
interference to radio communica tions.  However, there is no 
guarantee that interferenc e will not occur in a particular in-
stallation.  If this equipment does cause harmful interference 
to radio or television reception, which can be determined by 
turning the equipment off  and on, the user is encouraged 
to try to correct the interference by one or more of the fol-
lowing measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit diff  erent 
from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician  for help.
FCC Caution: Any changes or modifi cations not expressly ap-
proved by the party responsible for compliance could void 
the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter. Radiation Exposure Statement: This device meets the gov-
ernment’s requirements for exposure to radio waves. This 
device is designed and manufactured not to exceed the 
emission limits for exposure to radio frequency (RF) energy 
set by the Federal Communications Commission of the U.S. 
Government.
The exposure standard for wireless device employs a unit 
of measurement known as the Specifi c Absorption Rate, or 
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR 
are conducted using standard operating positions accepted 
by the FCC with the device transmitting at its highest certi-
fi ed power level in all tested frequency bands.
Notes on the Grant
: To comply with Part 15 of the FCC Rules, 
this product must be used with a Fujifi lm-specifi ed ferrite-
core A/V cable, USB cable, and DC supply cord.
A lithium ion battery that is recyclable 
powers the product you have purchased. 
Please call 1-800-8-BATTERY for informa-
tion on how to recycle this battery. 
						

							vii
For Your Safety
For Customers in CanadaFor Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Cana-
dian ICES-003.
Industry Canada statement: This device complies with RSS-
210 of the Industry Canada Rules. Operation is subject to 
the following two conditions: (1) This device may not cause 
harmful interference, and (2) this device must accept any 
interference received, including  interference that may cause 
undesired operation.
This device and its antenna(s) must not be co-located or op-
erating in conjunction with any other antenna or transmit-
ter, except tested built-in radios. The County Code Selection 
feature is disabled for products marketed in the US/ Canada.
Radiation Exposure Statement: The product comply with the 
Canada portable RF exposure limit set forth for an uncon-
trolled environment and are safe for intended operation as 
described in this manual. The further RF exposure reduction 
can be achieved if the product can be kept as far as possible 
from the user body or set the device to lower output power 
if such function is available.Disposal of Electrical and Electronic Equipment in Private HouseholdsDisposal of Electrical and Electronic Equipment in Private HouseholdsIn the European Union, Norway, Iceland and 
Liechtenstein: This symbol on the product, or in 
the manual and in the warranty, and/or on its 
packaging indicates that this product shall not 
be treated as household waste.  Instead it should 
be taken to an applicable collection point for the 
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will 
help prevent potential negative consequences to the en-
vironment and human health, which could otherwise be 
caused by inappropriate waste handling of this product.
This symbol on the batteries or accumulators in-
dicates that those batteries shall not be treated 
as household waste.
If your equipment contains easy removable batteries or 
accumulators please dispose these separately according to 
your local requirements.
The recycling of materials will help to conserve natural re-
sources.  For more detailed information about recycling this 
product, please contact your local city offi   ce, your household 
waste disposal service or the shop where you purchased the 
product. In Countries Outside the European Union, Norway, Iceland and 
Liechtenstein: If you wish to discard this product, including 
the batteries or accumulators, please contact your local au-
thorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates 
that they are to be disposed of separately. 
						

							viii
For Your Safety
Be sure to read these notes before use
Safety NotesThank you for your purchase of this product. For repair, inspection, and internal testing, con-
tact your FUJIFILM dealer.
•  Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s 
Manual carefully before use.
•  After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to  indicate the severity of the injury or 
damage that can result if the information indicated by the icon is ignored and the product 
is used incorrectly as a result.
WARNING This icon indicates that death or serious injury can result if the informa-
tion is ignored.
CAUTIONThis icon indicates that personal injury or material damage can result if 
the information is ignored.
The icons shown below are used to indicate  the nature of the instructions which are to be 
observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited 
(“Prohibited”).
Filled circles with an exclamation mark indicate an action that must be performed 
(“Required”).
  WARNINGWARNING
Do not use in 
the bathroom or  showerDo not immerse in or expose to water.   Failure to observe this precaution can cause 
a fi re or electric shock.
Do not disas- sembleDo not disassemble (do not open the case).   Failure to observe this precaution can 
cause fi re, electric shock, or injury due to product malfunction.
Do not touch 
internal parts
Should the case break open as the result of a fall or other accident, do not touch the 
exposed parts.   Failure to observe this precaution could result in electric shock 
or in injury from touching the damaged parts. Remove the camera battery 
immediately, taking care to avoid injury or electric shock, and take the product 
to the point of purchase for consultation.
  WARNINGWARNING
Do not place on unstable surfaces.   The product may fall, causing injury.
Do not view the sun through the lens or camera viewfi  nders.   Failure to observe this 
precaution can cause permanent visual impairment.
  CAUTIONCAUTIONDo not use or store in locations that are exposed to steam, or smoke or are very humid 
or extremely dusty.  Failure to observe this precaution can cause fi re or electric 
shock.
Do not leave in direct sunlight or in locations subject to very high temperatures, such 
as in a closed vehicle on a sunny day.   Failure to observe this precaution can cause 
fi r e .
Keep out of the reach of small children.   This product could cause injury in the 
hands of a child.
Do not handle with wet hands.  Failure to observe this precaution can cause 
electric shock.
Keep the sun out of the frame when shooting backlit subjects.   Sunlight focused into 
the camera when the sun is in or close to the frame can cause fi re or burns.
When the product is not in use, replace the lens caps and store out of direct sunlight.   
Sunlight focused by the lens can cause fi re or burns.
Do not carry the camera or lens while they are attached to a tripod.   The product can 
fall or strike other objects, causing injury. 
						

							ix
For Your Safety
European Union regulatory noticeEuropean Union regulatory notice
This product complies with the following EU Directives:
•  Low Voltage Directive 2006/95/EC
•  EMC Directive 2004/108/EC
•  RoHS Directive 2011/65/EU
•  R & TTE Directive 1999/5/EC
Compliance with these directives implies conformity to applicable harmonized European 
standards (European Norms) which are listed on the EU Declaration of Conformity issued by 
FUJIFILM Corporation for this product or product family.
This compliance is indicated by the following  conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. 
Bluetooth).
Regarding the Declaration of Conformity, visit  http://www.fujifilm.com/products/digital_
cameras/x/fujifilm_x_a2/pdf/index/fujifilm_x_a2_cod.pdf.
IMPORTANT:  Read the following notices before using the camera’s built-in wireless 
transmitter.
 
Q This product, which contains encryption function developed in the United States, is con-
trolled by the United States Export Administration Regulations and may not be exported 
or re-exported to any country to which the United States embargoes goods.
•  Use only as part of a wireless network.   FUJIFILM does not accept liability for damages result-
ing from unauthorized use.  Do not use in applications requiring a high degree of reliability, 
for example in medical devices or other systems that may directly or indirectly impact 
human life.  When using the device in c omputer and other systems that demand a greater 
degree of reliability than wireless networks, be sure to take all necessary precautions to 
ensure safety and prevent malfunction.
•  Use only in the country in which the device was purchased.   This device conforms to regulations 
governing wireless network devices in the c ountry in which it was purchased.  Observe all 
location regulations when using the device.  FUJIFILM does not accept liability for prob-
lems arising from use in other jurisdictions.
•  Wireless data (images) may be intercepted by third parties.   The security of data transmitted 
over wireless networks is not guaranteed.
•  Do not use the device in locations subject to magnetic fi  elds, static electricity, or radio interference.   
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject 
to magnetic fi elds, static electricity, or radio in terference that may prevent reception of 
wireless signals.  Mutual interference may occur when the transmitter is used in the vicinity 
of other wireless devices operating in the 2.4 GHz band.
•  The wireless transmitter operates in the 2.4 GHz band using DSSS and OFDM modulation.
Wireless Network Devices: Cautions
•  This device operates on the same frequency as commercial, educational, and medical devices and 
wireless transmitters.  It also operates on the same frequency as licensed transmitters and 
special unlicensed low-voltage transmitters used  in RFID tracking systems for assembly 
lines and in other similar applications.
•  To prevent interference with the above devices, observe the following precautions.   Confi rm that 
the RFID transmitter is not in operation before using this device.  Should you observe that 
the device causes interference in licensed transmitters used for RFID tracking, immedi-
ately stop using the aff  ected frequency or move the device to another location.  If you 
notice that this device causes interference in  low-voltage RFID tracing systems, contact a 
FUJIFILM representative.
2.4DS/OF4This sticker indicates that this device operates in the 2.4  GHz 
band using DSSS and OFDM modulation and may cause inter-
ference at distances of up to 40 m. 
						

							x
About This ManualAbout This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii).  For information 
on specifi c topics, consult the sources below.
Table of ContentsTable of Contents ................................................. .................................................PP xii xiiTroubleshootingTroubleshooting ................................................ ................................................PP 115 115
The “ Table of Contents” gives an overview of the 
entire manual.    The principal camera operations 
are listed here. Having a specifi c problem with the camera? 
Find the answer here.
Warning Messages and DisplaysWarning Messages and Displays  ......................... .........................PP 121 121Restrictions on Camera SettingsRestrictions on Camera Settings .......................... ..........................PP 132 132
Find out what’s behind that fl  ashing icon or error 
message in the display. See page 132 for restrictions on the options 
available in each shooting mode.
  Memory Cards Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards (
P 16), referred to in this manual as “memory 
cards.”