Fujitsu B23t 6 Led Operating Manual

Getting started
►Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
DP socket of the monitor and secure the plug connection by tightening the retaining screws.
The monitor automatically detects the input when only one signal source is connected.
►Insert one plug of the audio line in the AUDIO IN socket on the monitor
and make sure it is properly engaged.
►Plug the power cable supplied into the power connector of the monitor.
►Plug the supplied USB cable into...

Operation
Operation
Switching the device on and off
12
12
1 = Switch On/Off 2 = Power supply indicator
The colour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orange
Monitor is not receiving a video signal or is in power saving mode.
does not light up
Monitor is switched off.
►SwitchthedeviceonagainwiththeON/OFFswitch(1).
18 Fujitsu Technology Solutions
 

Operation
Notes on power management
If your computer is equipped with power management (power-saving mode), the monitor can fully
support this function. Here the monitor does not distinguish between the individual energy-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the modewith the highest energy-saving effect.
Stage OperationPower saving mode
Normal
ECO
Power supply indicator Lights up blue Lit green is orange
Display Max....

Operation
Changing the monitor settings
When putting the monitor into operation for thefirst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. If the OSD menu is
activated, a description of the current function of the buttons is displayed
directly above the buttons at the edge of the screen. If the OSD menu is not
activated, you can make the following...

Operation
Select OSD language
If one of the buttons is being pressed for thefirst time for the OSD menu, the
selection screen for the language is displayed:
►Press the
ECO/or theINPUT/button to select the required language.
►Press the
MENU/button to confirm your entries or theAUTO/button to cancel the process.
After selecting the OSD language for thefirst time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
►Press theAUTO/button for about 1 second.
TheAuto...

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►Press the
ECO/button to switch the ECO operating mode on or off.
The messageECO Mode einorECO Mode offappears.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the ON/OFF button
The ON/OFF...

Operation
►Press theMENU/button to activate the OSD menu.
The main menu appears, with icons for the setting functions.
Thefirst symbol, (Brightness/Contrast), is highlighted and the associated functions
are visible in the right-hand menufield.
►Press the
ECO/button or theINPUT/button to highlight another icon (e.g.Image adjust).
►Press the
MENU/button to select the highlighted icon.
TheImage adjustsettings window is displayed.
►Press the
AUTO/button to exit the main menu.
Fujitsu Technology Solutions 23
 

Operation
►Press theECO/button or theINPUT/button to highlight another function.
►Press the
MODE/button or the/button to change the setting.
►Press the
ECO/button or theINPUT/button to highlight another function.
►Press the
MENU/button to save the change or press theAUTO/button
to exit the function without making any changes.
If you want to change other settings, select the corresponding function from the OSD
main menu. All possible adjustments of the main menu are described in the following.
24 Fujitsu...

Operation
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not needed because
of the digital transmission technology being used.
Adjusting the brightness and contrast
Call up theBrightness/Contrastsetting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of the display
With this function you modify the...

Operation
Adjusting the volume
Call theAudiosetting window
Vo l u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
Setting colour temperature and colours
Call theColoursetting window
Select the colour temperature
The warmth of the screen colours is set using the colour temperature. The
colour temperature is measured in K (= Kelvin). You can choose between
sRGB,6500 K,7500 K,9300 K,NativeandCustom Colour.
In the user-defined setting you can change the...