Fujitsu B23t 6 Led Operating Manual

Operation
Setting functions in the Advanced menu
Call up theAdvancedsetting window
Input select
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when several signal sources are connected.
This requires that the graphic card used supports this function.
DDC-CI
Activation/deactivation of the DDC-CI
On= The DDC-CI function is enabled (standard setting)
Off= The DDC-CI function is disabled
ACR
Enable/disable ACR function
On = The ACR...

Notes on ergonomic colour adjustment
Notes on ergonomic colour adjustment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations...

Troubleshooting
Troubleshooting
Should an error occur,first check the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot solve the problem, please contact our Service Desk.
Fujitsu Technology Solutions 29
 

Troubleshooting
Having this problem? Check the following points:
No screen display
Power indicator does not light up►Check whether the power cable onthe
monitor is connected correctly.
►Check whether the computer is switched on.
No screen display
Power indicator is lit►Check whether the computer is switched on.
►Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
►Press any key on the computer keyboard.
The computer may be in power saving
mode.
►Alter...

Explanatory information about standard ISO 9241-307
Explanatory information about
standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel
A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display....

Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
B23T-6 LED
Dimensions and weight
Visible diagonals 57.6 cm
Dot pitch 0.2652 mm
Width 509.2 mm Image size
Height 286.4 mm
Maximum resolution 1920 x 1080
Width 551 mm
Height 358 mm Dimensions incl. monitor base
Depth 198 mm
Weight (without packaging)approx. 5.7 kg
Storable display modes40
Pixel error classes according to
ISO 9241-307ClassI
Electrical...

Technical specification
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position...

Technical specification
SUBDport
6 10
11 1551
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video ground blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
34 Fujitsu Technology Solutions
 

Technical specification
DVI-D port
91
17
Pin Meaning
1
TMDS Data2–
2
TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5
not connected
6
DDC Clock
7
DDC Data
8
Analog VerticalSync
9
TMDS Data1–
10
TMDS Data1+
11
TMDS Data 1/3 Shield
12 not connected
13 not connected
14 +5V Power
15 Earth
16 Hot Plug Detect
17
TMDS Data0–
18
TMDS Data0+
19
TMDSData 0/5 Shield
20 notconnected
21 not connected
22
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock–
Fujitsu Technology Solutions 35
 

Technical specification
DisplayPort socket
1 3 19 17 15 13 11 9 7 5
2 4 20 19 16 14 12 10 8 6
Pin Meaning
1
Lane 3 (negative)
2Earth
3
Lane 3 (positive)
4
Lane 2 (negative)
5
Earth
6
Lane 2 (positive)
7
Lane 1 (negative)
8Earth
9
Lane 1 (positive)
10
Lane 0 (negative)
11 E a r t h
12
Lane 0 (positive)
13
Connected to earth
14
Connected to earth
15
Auxiliary Channel (positive)
16 Earth
17
Auxiliary Channel (negative)
18 Hot Plug Detect
19
Return for Power
20
Power for connector (3.3 V 500 mA)
36 Fujitsu...