Fujifilm Camera X100t Owners Manual

NP-95
BC-65N
Rechargeable Li-ion batteries
Battery chargers
NP-95
Additional large-capacity NP-95 rechargeable batteries can be purchased as
required.
BC-65N
Replacement battery char gers can be purchased as required. At +20  °C/+68 °F,
the BC-65N charges an NP-95 in about 240 minutes.
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Power Supplies
002D0020 0032003600310020 002D  

RR-90
Remote Releases RR-90
Use to reduce camera shake or keep the shutter open during a time exposure.
An optional RR-90 remote release can be used for long time-exposures.
Remote Releases
002D0020 0032003600320020 002D  

Third-Party Remote Releases
Electronic releases from third-party suppliers can be connected via the microphone/remote
release connector.
A confirmation dialog will be displayed  when a third-party release is connected;
press  [MENU/OK]  and select [REMOTE]  for [MIC/REMOTE RELEASE] .
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Remote Releases
002D0020 0032003600330020 002D  

TCL-X100
WCL-X100
Tele Conversion Lens
Wide Conversion Lens
When attached to the X100T, the  TCL-X100 increases the focal length
by approximately 1.4× to 33 mm (equivalent to 50 mm in 35 mm
format).
When attached to the X100T, the  WCL-X100 increases the angle of
view for wider-angle shots.
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Conversion Lens
002D0020 0032003600340020 002D  

MIC-ST1
MIC-ST1
An external microphone for movie recording.
For more information, visit the website of the country or region of purchase (the new window
will open).
Check the website »
Stereo microphones
002D0020 0032003600350020 002D  

Adapter rings
Lens hoods
Protector filters
Leather cases
Hand Grip
Grip Belt
Other
002D0020 0032003600360020 002D  

AR-X100An aluminum adapter ring exclusively for use with the X100T/X100S/X100.
It is used when attaching the LH-X100 lens hood or φ49 mm filters available
from third-party suppliers.
Attaching Adapter Rings
Remove the front ring.
If you have trouble removing the  front ring, grip the entire ring
and rotate it as shown.
1. 
Other
002D0020 0032003600370020 002D  

Attach the adapter ring as shown, with the projections facing out.2. 
Keep the front ring and lens cap in a safe place when not in use.
Attach the adapter ring before attaching LH-X100 lens hood,
PRF-49S protector filter, or third-party filters.
Other
002D0020 0032003600380020 002D  

LH-X100This aluminum lens hood, exclusively for use with the X100T/X100S/X100,
comes with an AR-X100 adapter ring made of the same material. The
adapter ring is required when attaching the hood.
Attach the adapter ring before attaching the lens hood.
Align the indentations and rotate as shown.
Other
002D0020 0032003600390020 002D  

PRF-49S
LC-X100S
MHG-X100
GB-001A protective filter exclusively for use with the X100T/X100S/X100.
Attach the adapter ring be fore attaching the filter.
Requires AR-X100 adapter ring.
This leather case, exclusively for us e with the X100T/X100S/X100, combines
practicality with the luxury of leather and comes with a shoulder strap made
of the same material. Pictures can be  taken and batteries and memory cards
inserted or removed with the camera still in its case.
To increase the cameras grip. Bo th...