Faroudja Fdp-Dila1 Installation And Operations Manual

21
ENGLISH
Before connection, be sure to turn off both the projector and other devi\
ces to be connected.
¥ Read the manual thoroughly which comes with the device to be connected.
¥ Speakers with a built-in amplifier and game devices can be connected. Us\
e the AV connection cable and audio cable supplied,or the cable supplied with a game device.
Connecting to Devices which Control the Projector
Before connection, be sure to turn off both the projector and devices to\
 be connected.
¥ Read the manual...

22
Connecting to Various Devices (Cont.)
Connecting to Computer Devices
Before connection, be sure to turn off both the projector and computer devices.
¥ Read the manual which comes with each device thoroughly.
nConnection to an IBM PC or IBM-compatible computer
¥ Use the supplied computer connection cable. Also, prepare cables required for connecting the devices connected.
PC
AUDIOAUDIO
AUDIO
REMOTEY/C
L
R
H
V R
G
B
COMPUTER
OUT
RS-232C
POWER
¥ Desktop type
¥ Note type
¥ Desktop type
To monitor...

23
ENGLISH
Before connection, be sure to turn off both the projector and computer d\
evices.
¥ Read the manual which comes with each device thoroughly.
nConnection to Macintosh
¥ Use the supplied Personal computer connection cable and the supplied con\
version adapter for Mac.
Connecting to Computer Devices (Cont.)
¥ Desktop type
Connecting to Various Devices (Cont.)
PCAUDIOAUDIO
AUDIO
REMOTE Y/C
LR
H/C
S
V
R
G
B
COMPUTER OUT
RS-232C
¥ When connecting an audio output terminal such as a computer sound...

24
Connecting to Various Devices (Cont.)
After all devices have finished being connected, connect the projectorÕs power cord. At this time, do not turn on the MAIN
POWER switch yet.
Power cord (supplied)
Lens cap
CAUTION
To prevent fire and electric shock, observe the following:
¥ When you do not use devices, pull out their power cords
from wall outlets.
¥ Do not connect the devices with power cords other than
supplied.
¥ Do not use voltage other than the power voltage indicated.
¥ Do not scar, damage,...

25
ENGLISH
When Turning On the Devices Connected to the Projector
Turn on the switches of the projector and the devices connected in the fo\
llowing order.
Skip over unconnected devices if there is any.
Power switch of the monitor of the computer which provides input to the \
projector
Peripheral devices of the computer which provides input to the projector\
(Hard disk, magneto optical disk, scanner, etc.)
Power switch of AV devices which provide input to the projector
Projector itself
Power switches of...

26
Basic Operations
nProjectorÕs buttons
nRemote control unit
MAIN POWER switch
The following describes the basic procedure for normal use of
the projector.
1Turn on the MAIN POWER
switch.
ON [ y ]:The main power turns on and the STAND BY
indicator comes on.
ProjectorÕs indicator
2Press the OPERATE button.
(Or press the remote controlÕs
OPERATE button for one second
or more.)
¥ The OPERATE indicator comes on.
¥ About 30 seconds after the MAIN POWER switch is
turned on, you can start projecting.
Notes
¥...

27
ENGLISH
nRemote control unit
Basic Operations (Cont.)
nProjectorÕs buttons2. Select the video input to be projected
Remote control unit Projector
Screen display
* When the input is switched, the line display (ex. VIDEO) and
the source display (ex. NTSC(480i)) are shown on the upper
part of the screen (they disappear in about five seconds).
However, they will not be shown if LINE DISPLAY in ÒSetting
and Adjusting Other Functions (OPTIONS)Ó on page 43 is set
to OFF.
(For setting the source, see page...

28
Basic Operations (Cont.)
4. Adjust focus
nAdjust focus with the remote controlÕs FOCUS (+/Ð)
buttons.
nTo focus on farther points:
Press the FOCUS (+) button.
nTo focus on nearer points:
Press the FOCUS (Ð) button.
Remote control unit
Note
¥ Focus adjustment can also be made on the setting menu. For operating the
setting menu, refer to ÒMaking Basic SettingsÓ on page 31.
5. Adjust sound volume
nAdjust sound volume with the remote controlÕs VOL.
(+/Ð) buttons.
nWhen you press the VOL. (+) button:
The...

29
ENGLISH
Basic Operations (Cont.)
¦ For Operating Other Functions
nTo turn off video image and audio sound temporarily
Press the AV MUTING button.
n Press once:
Video image and audio sound turn off (do not come out).
n Press again:
Video image and audio sound come out again.
nTo use the quick alignment function
The quick alignment function is used to automatically adjust (set)
the screen settings of ÒTRACKING, PHASE, H. POS. and V. POS.Ó
of computer system input video.
¥ Use either the remote controlÕs...

30
Basic Operations (Cont.)
nTo display the MAIN menu
The main menu is used to adjust or set the projected video picture
and the projectorÕs condition, etc. (PIXEL CLOCK, POSITION,
PICTURE, SOUND, OPTIONS, SOURCE DECODER and
LANGUAGE). For operating the main menu, refer to pages 34 to
47.
¥ Press the remote controlÕs MENU/ENTER button.
The main menu appears on the screen.
Notes
¥ This button works only for numeric values. It does not work for switching
between ON and OFF.
¥ For items such as PIXEL CLOCK...