Farberware Food Processor FP3200FBS User Manual

MODEL/MODELO
FP3200FBS
12-Cup Food Processor with 4-Cup Nested Workbowl
Procesador de alimentos para 12 tazas con tazón de 4 tazas 

2
•  Read all instructions.
•  The unit has a safety interlock system. The unit will 
not operate unless the large work bowl is securely 
locked onto the base, the lid is securely locked onto 
the large workbowl, and the large food pusher is in 
the large feed chute. If the large food pusher comes 
out of the large feed chute, the machine will shut off. 
•   To protect against risk of electrical shock, do not put food  
processor base, cord or plug in water or other liquid. 
•  Close supervision is...

3
Getting To Know Your Farberware® 12-Cup Food Processor


 

 


 
1. 
Large food pusher (Part # FP3000FBS-11)
2.    Lid (with large feed chute)   
(Part # FP3000FBS-02)
3.  Small workbowl (Part # FP3000FBS-08)
4.  Large workbowl (Part # FP3000FBS-07)
5.  Base
6.  Control panel
7.  Skid-resistant feet 8. 
Small food pusher (Part # FP3000FBS-01)
9.    Reversible slicing/shredding disc   
(Part # FP3200FBS-03)
10.  Mini S blade (for small workbowl)   
  (Part # FP3200FBS-05)
11.  Blade shaft...

4
GETTING STARTED
• Remove all packing material, any stickers, and the plastic band around the  
power plug. 
•  Remove and save literature.
•  Please visit www.prodprotect.com/applica to register your warranty.
•  Wash all removable parts as instructed in CARE AND CLEANING  
section of this manual. 
•  CAUTION: Handle blades and discs very carefully. They are very sharp. 
•  Select a level dry countertop where the appliance is to be used allowing air space on 
all sides to provide proper ventilation for...

5
Note:  Be sure to lock the workbowl in place before attaching the 
blades or discs and lid. 
4.  Attach your selected blade or disc to the blade shaft in the 
bottom of the large workbowl (instructions for individual 
discs/blades follow in this manual).
5.  Place the lid on top of the workbowl, aligning the tabs and 
locking it into place by turning counterclockwise. The lid is 
locked when it clicks firmly into place. The lid will only lock 
when the feed chute is aligned with the workbowl handle....

6
1. Plug in the appliance to turn it on. 
2.  Select low, medium or high speed depending on what task you are completing.  Press 
and release PULSE button to pulse.
3.  To stop, press OFF|PULSE.  
4.  Always unplug the appliance when not in use. 
PULSE  LOW - SPEED 1 MED - SPEED 2 HIGH - SPEED 3
Use for precise  control when 
chopping/mixing Use for Mixing 
Dough  
(continuous processing)
Slicing and
Shredding
(continuous processing)
Chopping 
and Mixing
(continuous processing)
Fresh herbs
Nuts
Bread...

7
7. When finished, press OFF|PULSE and allow the disc to stop revolving and unplug 
appliance before removing lid. Twist lid clockwise to unlock and remove.
8.  Carefully remove slicing/shredding disc using the finger holes to lift straight up. Pull blade 
shaft out of the workbowl. Unlock workbowl by turning it clockwise and lift off base. 
9.  Empty workbowl. 
10.  Unplug appliance when not in use. 
 
USING THE SLICING/SHREDDING DISC 
WITH THE SMALL WORKBOWL 
1.  Lock large workbowl into position on...

8
• To slice cooked meat, including salami and pepperoni, food should be very cold. Cut in pieces to 
fit feed chute and process food using firm, even pressure. 
•  Remove the slicing/shredding disc before removing the workbowl from the processor. 
USING THE S BLADE IN THE LARGE WORKBOWL
1.  Lock workbowl in place on base.
2.  Carefully insert the blade shaft into the S Blade. When the 
S Blade gets to the bottom of the shaft, turn clockwise to 
lock (J).  You will feel it lock into place.
3.  Place...

9
USING THE MINI S BLADE IN THE SMALL 
WORKBOWL
1. Lock large workbowl into position on food processor base.
2.  Place blade shaft onto center post in large workbowl.
3.  Place small workbowl in large workbowl, fitting the tabs on 
the outside of the small bowl into the notches on the large 
workbowl. This will hold the small bowl firmly in place (L).
4.  Carefully place the Mini S Blade on the blade shaft in 
bottom of small workbowl. When the Mini S Blade gets to 
the bottom of the blade shaft, turn...

10
USING THE DOUGH BLADE
Important: The dough blade can only be used with the large 
workbowl. Only run the processor on LOW speed when using the 
dough blade. 
1.  Lock large workbowl onto base.
2.  Place dough blade on blade shaft and turn it clockwise to 
lock it onto bottom of shaft. You will feel it lock into place. (N)  Push dough blade and shaft 
down onto center post in workbowl until it is fully seated. 
3.  Insert all the dry ingredients into the workbowl.
4.  Place cover on workbowl. Secure...