Epson WorkForce 520 User Manual

Wireless Network Setup11
Setting Up With the Product Buttons
If you are using Mac OS X 10.6, or you did not connect a USB cable to set up the 
product on your wireless network, follow these steps to set it up using the product 
buttons:
1. Follow the instructions on the screen to start the product’s wireless Setup 
Wizard.
2. When you see this screen, use the product’s buttons to select the name of your 
wireless network, then press 
OK. When you’re finished, click Next.
If your network name isn’t...

12Wireless Network Setup
3. When you see this screen, do one of the following:
■If your wireless network has security enabled, use the product’s buttons to 
enter your network password. If your password has uppercase or lowercase 
letters, be sure to enter them correctly. Then click 
Next and go to step 4.
■Press the buttons repeatedly to select uppercase
letters or lowercase letters, or numbers and
special characters.
■Press r to move to the next character.
■Press l to delete a character.
■If your...

Wireless Network Setup13 7. When you see the Firewall Warning screen, click 
Next.
Note: 
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup 
continue. Do not select Ask Me Later, Keep Blocking, or Block.
8. Wait while EpsonNet Setup configures your product for the network.
9. When you see the Installation Complete screen, print a test page, then click 
Finish.
10. Follow the instructions on the screen to install the rest of your software.
When installation is complete,...

14Wireless Network Setup
To set up additional computers to print to the product, see “Setting Up Additional 
Computers” below.
Entering Your SSID Manually
If your network doesn’t broadcast its name (SSID), follow these steps to enter it:
1. From the Select SSID screen on the product control 
panel, press uor  d to select 
Other SSIDs, then 
press 
OK.
2. Use the numeric keypad on the control panel to enter your network name. 
Important: 
Network names are case-sensitive. Be sure to enter uppercase...

Wireless Network Setup15 4. When you see this screen, click 
Install.
5. When you see this screen, select 
Wireless connection and click Next.
 

16Wireless Network Setup
6. When you see this screen, select The printer is already on my wireless 
network
, then click Next.
7. Wait while the software is installed.
8.Mac OS X 10.6: Skip to step 13 on page 17.
9. When you see the Firewall Warning screen, click 
Next.
Note: 
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup 
continue. Do not select Ask Me Later, Keep Blocking, or Block.
 

Wireless Network Setup17 10. If you see a screen like this one, select the product you would like to set up, 
then click 
Next.
11. Wait while EpsonNet Setup configures your product for the network.
12. When you see the Installation Complete screen, print a test page, then click 
Finish.
13. Follow the instructions on the screen to install the rest of your software.
When installation is complete, remove the CD.
 

18Wired (Ethernet) Network Setup
Wired (Ethernet) Network Setup
The steps in this section provide detailed instructions for setting up your product 
on a wired (Ethernet) network. 
Note:
If you’re having trouble setting up your product, see “Network Problems” on page 50.
■
If this is the first time that you’re installing the product, follow the steps 
below.
■If your product is already on your wired network and you need to set up 
additional computers to print to the product, see page 22.
Installing for...

Wired (Ethernet) Network Setup19 4. When you see this screen, click 
Install.
5. When you see this screen, select 
Wired network connection and click Next.
 

20Wired (Ethernet) Network Setup
6. When you see this screen, select Set up printer for the first time, then click 
Next.
7. When you see this screen, connect the product to your router, access point, or 
hub with an Ethernet network cable, then click 
Next.
8.Mac OS X 10.6: Skip to step 14 on page 21.
9. Wait while the software is installed, then click 
Next to start network 
installation.