Epson WorkForce 520 User Manual

							Wireless Network Setup11
Setting Up With the Product Buttons
If you are using Mac OS X 10.6, or you did not connect a USB cable to set up the 
product on your wireless network, follow these steps to set it up using the product 
buttons:
1. Follow the instructions on the screen to start the product’s wireless Setup 
Wizard.
2. When you see this screen, use the product’s buttons to select the name of your 
wireless network, then press 
OK. When you’re finished, click Next.
If your network name isn’t listed, try the following:
■Make sure that your wireless router or access point is turned on and 
working correctly. Press the 
yStop/Clear Settings button to return to 
the previous screen, press 
OK to select Setup Wizard, then repeat step 2.
■If you still can’t find the network name in the list, your router or access 
point is not broadcasting its network name. Press uor  d to select 
Other 
SSIDs
, then press OK. Continue with the steps in “Entering Your SSID 
Manually” on page 14.
 
						

							12Wireless Network Setup
3. When you see this screen, do one of the following:
■If your wireless network has security enabled, use the product’s buttons to 
enter your network password. If your password has uppercase or lowercase 
letters, be sure to enter them correctly. Then click 
Next and go to step 4.
■Press the buttons repeatedly to select uppercase
letters or lowercase letters, or numbers and
special characters.
■Press r to move to the next character.
■Press l to delete a character.
■If your wireless network doesn’t have security enabled, click Next and 
continue with step 4.
Note: 
If you’re having trouble entering your network password, click Watch video 
overview to watch a short video tutorial on how to enter your network password. 
4. Follow the on-screen instructions to finish selecting network settings.
If you see a network setup failed message, the network password may have 
been entered incorrectly. If your password has uppercase or lowercase letters, 
or numbers, be sure to enter them correctly.
Note: 
If the product still doesn’t connect to your wireless network, see “The product 
cannot find or connect to the wireless router or access point” on page 50.
5.Mac OS X 10.6: Skip to step 10 on page 13.
6. Wait while the software is installed.
 
						

							Wireless Network Setup13 7. When you see the Firewall Warning screen, click 
Next.
Note: 
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup 
continue. Do not select Ask Me Later, Keep Blocking, or Block.
8. Wait while EpsonNet Setup configures your product for the network.
9. When you see the Installation Complete screen, print a test page, then click 
Finish.
10. Follow the instructions on the screen to install the rest of your software.
When installation is complete, remove the CD.
 
						

							14Wireless Network Setup
To set up additional computers to print to the product, see “Setting Up Additional 
Computers” below.
Entering Your SSID Manually
If your network doesn’t broadcast its name (SSID), follow these steps to enter it:
1. From the Select SSID screen on the product control 
panel, press uor  d to select 
Other SSIDs, then 
press 
OK.
2. Use the numeric keypad on the control panel to enter your network name. 
Important: 
Network names are case-sensitive. Be sure to enter uppercase letters (ABC) or 
lowercase letters (abc) correctly.
■
Press the buttons repeatedly to select uppercase
letters or lowercase letters, or numbers and
special characters.
■Press r to move to the next character.
■Press l to delete a character.
3. When you’re done entering your network name, 
press 
OK.
4. Continue with step 3 on page 12 to enter your 
network password.
Setting Up Additional Computers
1. Make sure your product is turned on.
2. Insert the product software CD.
3.Windows 7 and Windows Vista: If you see the AutoPlay window, click 
Run 
Setup.exe
. When you see the User Account Control screen, click Yes or 
Continue.
Windows XP: When you see the Software Installation screen, continue with 
step 4.
Mac OS X: Double-click the 
Epson icon.
 
						

							Wireless Network Setup15 4. When you see this screen, click 
Install.
5. When you see this screen, select 
Wireless connection and click Next.
 
						

							16Wireless Network Setup
6. When you see this screen, select The printer is already on my wireless 
network
, then click Next.
7. Wait while the software is installed.
8.Mac OS X 10.6: Skip to step 13 on page 17.
9. When you see the Firewall Warning screen, click 
Next.
Note: 
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup 
continue. Do not select Ask Me Later, Keep Blocking, or Block.
 
						

							Wireless Network Setup17 10. If you see a screen like this one, select the product you would like to set up, 
then click 
Next.
11. Wait while EpsonNet Setup configures your product for the network.
12. When you see the Installation Complete screen, print a test page, then click 
Finish.
13. Follow the instructions on the screen to install the rest of your software.
When installation is complete, remove the CD.
 
						

							18Wired (Ethernet) Network Setup
Wired (Ethernet) Network Setup
The steps in this section provide detailed instructions for setting up your product 
on a wired (Ethernet) network. 
Note:
If you’re having trouble setting up your product, see “Network Problems” on page 50.
■
If this is the first time that you’re installing the product, follow the steps 
below.
■If your product is already on your wired network and you need to set up 
additional computers to print to the product, see page 22.
Installing for the First Time
1. Make sure your product is turned on.
Note: 
If you previously set up the product on a wireless network, you must disable the 
wireless LAN before you can connect to a wired network. Press xMenu, press 
uor  d to select Network Settings, then Wireless LAN Setup, then Disable 
Wireless LAN. Press OK, press 1 to confirm, and press xMenu to exit.
2. Insert the product software CD.
3.Windows 7 and Windows Vista: If you see the AutoPlay window, click 
Run 
Setup.exe
. When you see the User Account Control screen, click Yes or 
Continue.
Windows XP: When you see the Software Installation screen, continue with 
step 4.
Mac OS X: Double-click the 
Epson icon.
 
						

							Wired (Ethernet) Network Setup19 4. When you see this screen, click 
Install.
5. When you see this screen, select 
Wired network connection and click Next.
 
						

							20Wired (Ethernet) Network Setup
6. When you see this screen, select Set up printer for the first time, then click 
Next.
7. When you see this screen, connect the product to your router, access point, or 
hub with an Ethernet network cable, then click 
Next.
8.Mac OS X 10.6: Skip to step 14 on page 21.
9. Wait while the software is installed, then click 
Next to start network 
installation.