Epson Stylus Pro 9400 User Manual
Have a look at the manual Epson Stylus Pro 9400 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Maintenance and Transportation291 7 7 7 7 7 7 7 7 7 7 7 7 English 2. Press the Menu r button to enter the Menu mode. 3. Press the Paper Feed d button or Paper Feed u button to select MAINTENANCE, and then press the Menu r button. 4. Press the Paper Feed d button or Paper Feed u button to display BK INK CHANGE, and then press the Menu r button. 5. Press the Enter button to execute. 6. Make sure OPEN THE RIGHT COVER appears on the LCD, and then open the right ink compartment cover.
292Maintenance and Transportation 7. Make sure RAISE THE RIGHT INK LEVER appears on the LCD, and then raise the ink lever on the right ink compartment. 8. Make sure OPEN THE LEFT COVER appears on the LCD, and then open the left ink compartment cover. 9. Make sure RAISE THE LEFT INK LEVER appears on the LCD, and then raise the ink lever on the left ink compartment.
Maintenance and Transportation293 7 7 7 7 7 7 7 7 7 7 7 7 English 10. Make sure REMOVE ALL FOUR INK CARTRIDGES ON THE RIGHT SIDE appears on the LCD, and then remove all four ink cartridges from the right ink compartment. 11. Make sure INSTALL C/M/Y CONVERSION CARTRIDGES appears on the LCD, and then insert three conversion cartridges in the slots on the right ink compartment.
294Maintenance and TransportationNote: If CONVERSION CRTG LIFE. REPLACE CONVERSION CRTG WITH A NEW ONE. appears on the LCD, press the Pause button. Remove the old conversion cartridge(s) from the right ink compartment, and then insert the new conversion cartridge(s). Finally, go to step 4 to start again. 12. Make sure LOWER THE RIGHT INK LEVER appears on the LCD, and then lower the ink lever on the right ink compartment.
Maintenance and Transportation295 7 7 7 7 7 7 7 7 7 7 7 7 English 13. The printer starts draining ink, and DRAINING INK XX% appears on the LCD. Wait until draining is complete. 14. When draining is complete, RAISE THE RIGHT INK LEVER appears on the LCD. Raise the ink lever on the right ink compartment. 15. Make sure REMOVE C/M/Y CONVERSION CARTRIDGES appears on the LCD, and then remove the conversion cartridges from the slots on the right ink compartment.
296Maintenance and Transportation 16. Make sure INSTALL ALL FOUR INK CARTRIDGES ON THE RIGHT SIDE appears on the LCD, and then insert the cartridges in their specified slots. 17. Make sure LOWER THE RIGHT INK LEVER appears on the LCD, and then lower the ink lever on the right ink compartment. Make sure LOWER THE LEFT INK LEVER appears on the LCD, and then lower the ink lever on the left ink compartment. 18. Make sure RAISE THE RIGHT INK LEVER appears on the LCD, and then raise the ink lever on the right ink compartment.
Maintenance and Transportation297 7 7 7 7 7 7 7 7 7 7 7 7 English Make sure RAISE THE LEFT INK LEVER appears on the LCD, and then raise the ink lever on the left ink compartment. 19. The printer starts charging ink. After a while, ink lever messages appear on the LCD. When a message appears on the LCD, raise or lower the ink levers accordingly. Note: Because ink charging after black ink conversion consumes a large quantity of ink, you may need to replace the ink cartridges soon. 20. When LOWER THE RIGHT INK LEVER AND CLOSE THE COVER appears on the LCD, lower the right ink lever and close the cover. Then, when LOWER THE LEFT INK LEVER AND CLOSE THE COVER appears on the LCD, lower the left ink lever and close the cover. The ink charging is completed. Updating the printer driver information After the replacement operation, update the driver information using the steps below.
298Maintenance and Transportation For Windows Click the Main tab and make sure that the correct ink cartridge is displayed. If not, set the information manually by clicking the Utility tab and then the Printer and Option Information button. For Mac OS 9.x Select Chooser from the Apple menu, and then click the printers icon and printer port. For Mac OS X Remove the printer from the Print Center (for Mac OS X 10.2.x) or the Printer Setup Utility (for Mac OS X 10.3.x), and then add it again.
Maintenance and Transportation299 7 7 7 7 7 7 7 7 7 7 7 7 English Replacing the Maintenance Tank If the maintenance tank icon tells that the maintenance tank is full or near full on the LCD, replace the maintenance tank. To check the product code of the Maintenance Tank, see “Consumable Products” on page 375. To replace the maintenance tank, follow the steps below. 1. Open the package of a new maintenance tank. 2. Put your hand on the handle on the side of the printer, then gently pull the maintenance tank outward. Note: EPSON Stylus Pro 9800/9400 has two maintenance tanks. Make sure which maintenance tank is needed to be replaced with the message on the LCD. 3. Put the used maintenance tank in the plastic bag provided. Note: Do not tilt the used maintenance tank until after it is sealed in the plastic bag. 4. Insert the new maintenance tank into the place.
300Maintenance and Transportation Replacing the Paper Cutter When the paper cutter does not cut cleanly, it may be blunt and require replacement. w Warning: Be careful not to cut yourself while replacing the paper cutter. To check the product code of the Auto Cutter Spare Blade, see “Consumable Products” on page 375. To replace the paper cutter, follow the steps below. 1. Make sure the printer is on. 2. Press the Menu r button to enter the Menu mode. 3. Press the Paper Feed d button or Paper Feed u button to display MAINTENANCE, and then press the Menu r button. 4. Press the Paper Feed d button or Paper Feed u button to display CUTTER REPLACEMENT. 5. Press the Menu r button. EXECUTE is displayed on the LCD panel, then press the Enter button. c Caution: Never move the paper cutter holder by hand. Otherwise, damage to your printer may occur.