Epson Stylus Pro 7450 User Manual
Have a look at the manual Epson Stylus Pro 7450 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Maintenance and Transportation251 To change the black ink, follow the steps below. 1. Make sure that READY appears on the LCD panel. 2. Press the Menu r button to enter Menu mode. 3. Press the Paper Feed d button or Paper Feed u button to select MAINTENANCE, and then press the Menu r button. 4. Press the Paper Feed d button or Paper Feed u button to display BK INK CHANGE, and then press the Menu r button. 5. Press the Enter button to execute. 6. Make sure OPEN THE RIGHT COVER appears on the LCD panel, and then open the right ink compartment cover.
Maintenance and Transportation252 7. Make sure RAISE THE RIGHT INK LEVER appears on the LCD panel, and then raise the ink lever on the right ink compartment. 8. Make sure OPEN THE LEFT COVER appears on the LCD panel, and then open the left ink compartment cover. 9. Make sure RAISE THE LEFT INK LEVER appears on the LCD panel, and then raise the ink lever on the left ink compartment.
Maintenance and Transportation253 10. Make sure REMOVE ALL FOUR INK CARTRIDGES ON THE RIGHT SIDE appears on the LCD panel, and then remove all four ink cartridges from the right ink compartment. 11. Make sure INSTALL C/M/Y CONVERSION CARTRIDGES appears on the LCD panel, and then insert three conversion cartridges in the slots on the right ink compartment.
Maintenance and Transportation254 Note: If CONVERSION CRTG LIFE. REPLACE CONVERSION CRTG WITH A NEW ONE. appears on the LCD panel, press the Pause button. Remove the old conversion cartridge(s) from the right ink compartment, and then insert the new conversion cartridge(s). Finally, go to step 4 to start again.
Maintenance and Transportation255 12. Make sure LOWER THE RIGHT INK LEVER appears on the LCD panel, and then lower the ink lever on the right ink compartment. 13. The printer starts draining ink, and DRAINING INK XX% appears on the LCD panel. Wait until draining is complete.
Maintenance and Transportation256 14. When draining is complete, RAISE THE RIGHT INK LEVER appears on the LCD panel. Raise the ink lever on the right ink compartment. 15. Make sure REMOVE C/M/Y CONVERSION CARTRIDGES appears on the LCD panel, and then remove the conversion cartridges from the slots on the right ink compartment.
Maintenance and Transportation257 16. Make sure INSTALL ALL FOUR INK CARTRIDGES ON THE RIGHT SIDE appears on the LCD panel, and then insert the cartridges in their specified slots. 17. Make sure LOWER THE RIGHT INK LEVER appears on the LCD panel, and then lower the ink lever on the right ink compartment. Make sure LOWER THE LEFT INK LEVER appears on the LCD panel, and then lower the ink lever on the left ink compartment.
Maintenance and Transportation258 18. Make sure RAISE THE RIGHT INK LEVER appears on the LCD panel, and then raise the ink lever on the right ink compartment. Make sure RAISE THE LEFT INK LEVER appears on the LCD panel, and then raise the ink lever on the left ink compartment. 19. The printer starts charging ink. After a while, ink lever messages appear on the LCD panel. When a message appears on the LCD panel, raise or lower the ink levers accordingly. Note: Because ink charging after black ink conversion consumes a large quantity of ink, you may need to replace the ink cartridges soon. 20. When LOWER THE RIGHT INK LEVER AND CLOSE THE COVER appears on the LCD panel, lower the right ink lever and close the cover. Then, when LOWER THE LEFT INK LEVER AND CLOSE THE COVER appears on the LCD panel, lower the left ink lever and close the cover. The ink charging is completed.
Maintenance and Transportation259 Updating the printer driver information After the replacement operation, update the driver information using the steps below. For Windows Click the Main tab and make sure that the correct ink cartridge is displayed. If not, set the information manually by clicking the Utility tab and then the Printer and Option Information button. For Mac OS X Remove the printer from the Print Center (for Mac OS X 10.2.x) or the Printer Setup Utility (for Mac OS X 10.3.x or later), and then add it again.
Maintenance and Transportation260 Replacing the Maintenance Tank If the maintenance tank icon tells that the maintenance tank is full or near full on the LCD panel, replace the maintenance tank. To check the product code of the Maintenance Tank, see “Consumable Products” on page 363. To replace the maintenance tank, follow the steps below. 1. Open the package of a new maintenance tank. 2. Put your hand on the handle on the side of the printer, then gently pull the maintenance tank outward. Note: EPSON Stylus Pro 9880/9880C/9450 has two maintenance tanks. Make sure which maintenance tank is needed to be replaced with the message on the LCD panel. 3. Put the used maintenance tank in the plastic bag provided. Note: Do not tilt the used maintenance tank until after it is sealed in the plastic bag. 4. Insert the new maintenance tank into the place.