Epson Stylus Pro 7400 User Manual

Printing with Mac OS 9.x121
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Copies setting
You can specify the number of copies. Type the number you want 
in the Copies box, or click the arrows next to the box. You can 
enter any number from 1 to 9999.
Making the Pages setting
You can specify the range or printed pages. Select either All or 
Range. If you select Range, enter the appropriate range of pages 
in the Range text box.
Setting the print time
You can specify the time you want the printer to begin...

122Printing with Mac OS 9.x To set the print time, follow the steps below.
1. Click  Background Printing, if necessary.
2. Select On as the Background Printing, if necessary.
3. Select Urgent, Normal, Print at, or Hold as the Print Time 
setting. If you select Print at, use the arrows beside the date 
and time boxes to specify the date and time that you want to 
print the data.
Note:
Make sure that the computer and printer are turned on at the date 
and time you specify.
4. Click OK. 
5. In the Print...

Printing with Mac OS 9.x123
2
2
2
2
2
2
2
2
2
2
2
2
English
3. Click Preview. The Preview dialog appears, and displays a 
preview of your data.
The Preview dialog contains several icon buttons that you can 
use to perform the following functions.
Zoom Click this button to enlarge or reduce the size 
of the previewed page.
Show/Hide 
Printable 
AreaClick this button to display or hide the 
borderlines which indicate the printable area. 
The printer cannot print anything which is 
outside of this area.
Add...

124Printing with Mac OS 9.x 4. If you are satisfied with the previewed data, click Print. If you 
are not satisfied with the appearance of the data, click 
Cancel. The Preview and Print dialogs close with the current 
print settings preserved. Open the Print dialog again to make 
additional changes to the print settings.
Making Settings in the Page Setup Dialog
You can make the Paper Size, Paper Source, Borderless, Auto Cut, 
Orientation, Reduce or Enlarge, Printable Area, and Roll Paper 
Option settings...

Printing with Mac OS 9.x125
2
2
2
2
2
2
2
2
2
2
2
2
English
1. Click Customize. The following dialog appears.
2. To define a new paper size, click New.
3. Type a unique name for the paper size in the paper size list.
4. Specify the measurement unit as either cm or inch.
5. Enter the width and height of your paper by typing the text 
in the appropriate text boxes.
Note:
The maximum paper height is 90.55 inches (230 cm).
6. Specify the margins by typing in the Margin text boxes or by 
manipulating the...

126Printing with Mac OS 9.x
Making the Borderless setting
You can print your data without margins on paper. 
For this printing mode, Epson recommends the following media 
conditions.
Accommodate media width:
* for EPSON Stylus Pro 9800/9400 use only.
Note:
❏If your application has margin settings, make sure they are set to 
zero before printing.
❏When printing on cut-sheet media, only the left and right margins 
are set to zero. The top margin is always 3 mm, and the bottom 
margin is always 14 mm. The...

Printing with Mac OS 9.x127
2
2
2
2
2
2
2
2
2
2
2
2
English
❏The ink may contaminate the platen of the printer. In this case, wipe 
the ink away using a cloth.
❏Printing with this feature takes longer time than normal printing.
❏When Premium Glossy Photo Paper (250) roll paper or Premium 
Semigloss Photo Paper (250) roll paper is used in printing, the top 
margin is always 20 mm.
❏The following media may smear in the top area when selecting 
Single Cut or Double Cut for the Auto Cut setting:...

128Printing with Mac OS 9.x 2. Click the Expansion button. The following dialog appears.
3. Choose Auto Expand or Retain Size from the pull-down 
menu.
Auto ExpandSelect this setting if you want to enlarge the size of 
print data automatically and print with no margins. 
You can choose the amount of enlargement by 
moving the slider.
Note:
Enlarged areas that exceed the paper size will not 
be printed on the paper.
Retain SizeSelect this setting if you do not want to change the 
ratio of your print...

Printing with Mac OS 9.x129
2
2
2
2
2
2
2
2
2
2
2
2
English
4. Make the Auto Cut setting. See “Making the Auto Cut setting” 
on page 129.
5. Click OK.
6. Start printing your data from your application.
Making the Auto Cut setting
This setting is available only when Roll Paper or Roll Paper 
(Banner) is selected as the Paper Source setting. You can select 
how the paper is cut after printing. 
Single Cut
Select this setting if you want to save paper. 
If you select this setting, the boundary of a picture...

130Printing with Mac OS 9.x Note:
This setting appears only when the Borderless check box is selected.
Double Cut
Select this setting to avoid the slight gap that occurs with the 
Single Cut setting. A margin is created between pictures, and 
1 mm along the inside of each picture is cut.
Note:
This setting appears only when the Borderless check box is selected.