Epson Stylus Pro 4880 User Manual

Printing with Windows71
Print Page Line
You can specify whether to print a page line on the right side and also below 
the printed data for manual cutting.
When you have checked the Print Page Line checkbox, the print page line 
feature functions differently depending on the Auto Cut setting, as described 
below.
Selecting the Save Roll Paper setting
This function is effective if you wish to save roll paper, because blank portion 
of the last page of your printed data is not fed through the printer. To...

72Printing with Windows
Checking Ink Levels
You can check the status of each ink cartridge.
Note:
If your printer is not connected properly or Epson Status Monitor 3 is not installed, all 
of the Ink Levels will be grayed out.
Previewing your printout
If you select the Print Preview checkbox on the Main tab, you can see how 
your printout will look before you print it. When you send a print job to the 
printer, the Epson Print Preview window appears, allowing you to make 
changes before printing.
 

Printing with Windows73 Note:
The Print Preview window is not color accurate.
The Epson Print Preview toolbar contains several buttons you can use to 
perform the following functions.
You can also modify the previewed print job in the following ways:
❏Select and preview individual pages.
❏Reduce or enlarge the size of preview.
❏Select and print any or all pages.
ZoomClick this button to reduce or enlarge the size of 
the previewed image.
Fit to ScreenClick this button to scale the previewed image so...

74Printing with Windows
❏Magnify the previewed document: Click View and then select Magnify to 
open the Magnify window, which magnifies the area of the previewed 
document outlined by the red box. Drag the red box to view other parts of 
the image.
❏Specify which pages in the document you want to print: Click Print Option, 
and then select Remove Page or Add Page.
After you preview the print job, click Print to print it, or click Cancel to cancel 
the print job.
Using the Manual function
You can access...

Printing with Windows75 Note:
❏Most Windows applications feature page layout settings that override similar 
settings in the printer driver. If your application does not have these features, 
verify the settings on the printer driver’s Page Layout tab.
❏Some of the functions are not available depending on the paper source you 
choose.
Selecting the Orientation settings
You can specify the direction of printing on the page using the settings in the 
table below.
PortraitPrint direction is short edge...

76Printing with Windows
Selecting the Copies setting
Enter a number in the Copies box, or click the arrow next to the box to specify 
the number of copies you want to print. You can enter any number from 1 to 
9999. When printing multiple copies of your document, select Collate to print 
one complete document set at a time. Select Reverse Order to print your 
documents in reverse order, starting with the last page.
 

Printing with Windows77
Selecting the Reduce/Enlarge settings
You can fit your image to the size of paper you want to print on. To enable this 
feature, click the Reduce/Enlarge checkbox. When this feature is enabled, 
you can select the following settings.
Selecting Double-Sided Printing setting
There are two types of double-sided printing available. Standard double-sided 
printing allows you to print the odd-numbered pages first. Once these pages 
are printed, the paper can be reloaded for printing the...

78Printing with Windows
You can also select Folded Booklet double-sided printing to make single-fold 
booklets.
Note:
❏The double-sided printing feature is not available when the printer is accessed 
over a network or used as a shared printer, Status Monitor 3 is not installed, or 
your system is not configured to support bi-directional communication.
❏Only use media types that are suitable for double-sided printing; otherwise, the 
print quality may deteriorate.
❏Depending on the type of paper and the...

Printing with Windows79
2. Click Margins. You see a window like this one.
3. Select the edge of the paper where binding will be placed. You can choose 
Left, Top, or Right.
4. Specify the width of the binding margin in the Binding Margin text box. You 
can specify any width from 0.12 to 1.18 in. (3.0 to 30.0 mm).
Note:
The actual binding margin may vary depending on the settings specified in your 
application. We recommend that you print a test print before printing an entire job.
5. Click OK to return...

80Printing with Windows
Folded Booklet double-sided printing
You can make single-fold booklets using the double-sided printing feature. 
When you create a single-fold booklet, the pages that appear on the outside 
(after the booklet is folded) are printed first. The pages that will appear inside 
the booklet can then be printed after the paper is reloaded into the printer.
✽ Binding Edge
A booklet can be created by printing pages 1 and 4 on the first sheet of paper, 
pages 5 and 8 on the second sheet of...