Epson Stylus Photo R800 User Manual

Printing Special Photos51
Printing Your Color-Managed Photo
1. Click the 
Print button.
2. Select your printer from the Printer menu.
3. Select 
Print Settings from the pull-down menu.
4. Select the Media Type setting for the paper you’ll use for the printer.
5. Click the 
Advanced button.
6. Turn off the High Speed and Edge Smoothing options, if they are available.
7. Select 
Color Management 
from the pull-down menu.
8. Select 
No Color Adjustment.
Note: Make sure that you select 
No Color Adjustment....

52Printing Special Photos
Windows
Opening Your Image
1. Open Adobe Photoshop.
2. Select 
Edit > Color Settings.
3. Select 
U.S. Prepress Defaults from 
the Settings pull-down menu. This sets 
Adobe RGB (1998) as the RGB 
working space and activates warning 
messages for profile mismatches and 
missing profiles. Then click 
OK.
4. Open the photo you want to print.
5. If you see the message shown below, select 
Use the embedded profile (instead 
of the working space)
 option and click OK. It is generally...

Printing Special Photos53
7. When your image appears, evaluate the color balance and contrast as displayed on 
your monitor. If they need improvement, select 
Image > Mode > Assign 
Profile
. Select one of the following as the Profile setting:
■A different RGB working space, such as ColorMatch RGB or sRGB 
IEC61966-2.1
■A scanner profile for your scanner
■A camera profile for your digital camera
Also click the 
Preview box so you can see the effects of your profile choice on the 
screen.
Note: Assigning...

54Printing Special Photos
4. Select the size of your paper as the Size setting.
5. Select the orientation of your image.
6. Click 
OK.
7. Select 
File > Print with Preview.
8. Click 
Show More Options, 
then select 
Color Management 
from the pull-down menu. 
Additional options appear:
9. Under Print Space: Profile, select 
a profile for your printer and the 
paper you’ll use for the print.
10. As the Print Space: Intent setting, 
select 
Relative Colorimetric.
Note: If your image contains very...

Printing Special Photos55
Printing Your Color-Managed Photo
1. Click the 
Print button.
2. Make sure your printer is selected, and click the 
Properties button. 
3. Select the 
Photo or Best Photo setting as the Quality Option.
4. Select the Type setting for the paper you’ll use for the print.
5. Click the 
Advanced button.
6. Turn off the High Speed and Edge Smoothing options, if they are available.
7. Click the 
ICM button under Color Management.
8. Click the 
Off (No Color Adjustment) button.
Note:...

56Printing Special Photos
Solving Color Management Problems
If you selected the wrong combination of source profile, printer profile, and color 
management settings, you’ll get unexpected results. Try these solutions:
■If your printed image is darker than expected and has a strong yellow-brown cast, 
you probably turned off color management in both Photoshop and the Epson 
printer driver. 
Return to the Print with Preview instructions for Adobe Photoshop on page 50 
(for Mac OSX) or page 53 (for...

Printing Special Photos57
5. Select Same as Source as the Print Space: Profile setting.
6. Click the 
Page Setup button.
7. Select your printer from the Format for pull-down menu.
8. Select the appropriate Paper Size and Orientation settings, then click 
OK.
9. Click the 
Print button.
10. Select your printer from the Printer menu, then select 
Print Settings from the 
pull-down menu.
 

58Printing Special Photos
11. Select the Media Type setting for the profile you’re printing.
12. Click the 
Advanced button.
13. Select 
Photo as the Print Quality setting, though you can select a lower or higher 
quality setting.
14. Turn off the High Speed and Edge Smoothing options, if they are available.
15. Select 
Color Management from the pull-down menu. 
16. Click 
No Color Adjustment.
17. Click 
Print to print your test target.
18. Repeat these steps to print a test target for each paper type...

Printing Special Photos59 Windows
1. Open Adobe Photoshop and open the profile target file.
2. If you see a missing profile screen, select 
Leave as is (don’t color manage).
3. Select 
File > Print with Preview.
4. In the Print window, click the 
Show More Options checkbox, 
then choose 
Color Management 
in the drop-down menu.
5. Select 
Same as Source as the 
Print Space: Profile setting.
6. Click the 
Print button.
7. Click the 
Properties button.
8. Select 
Photo or Best Photo as the 
Quality...

60Printing Special Photos
12. Click the ICM button under Color Management.
13. Click the 
Off (No Color Adjustment) button.
14. Click 
OK.
15. Click 
OK to print.
16. Repeat these steps to print a test target for each paper type you plan to print on.
Creating a Custom Profile
If you’re creating a custom profile for your printer, follow the instructions provided 
with your profile-building software (such as Monaco Systems MonacoEZcolor or 
GretagMacbeth ProfileMaker) to create your custom profile using...