Epson Stylus Photo R2000 User Manual

Tip: 
Regarding the size afte r joining together: 
When  Borderless Poster Print is cleared and 
printing with margins is selected, the  Print Cutting 
Guides  items are displayed. 
The finished size is the same whether or not  Trim 
Lines  is selected. However, if Overlapping 
Alignment Marks  is selected, the finished size is 
smaller with an overlap.
E
Check other settings and start printing.
Joining the output paper  
together
The steps for joining the output paper together differ 
between borderless...

B
Lay the upper left sheet on top of upper right 
sheet. Lineup the X marks as shown in the
illustration below, and temporarily fasten them 
using an adhesive tape on the back.
C
While two pages are overlapping, cut them along
the alignment mark (vertical red line).
D
Join the left and right sheets together. 
Use an adhesive tape to stick the backs of the 
sheets together.
E
Repeat steps 1 to 4 for the lower sheets.
F
Cut the bottom of the upper sheets along the 
alignment marks (horizontal blue line)....

J
After joining all of the sheets together, cut the 
margins along the outer guide lines.User-defined Paper Sizes/ 
Custom Paper Sizes
You can also print on paper  sizes that are not already 
available in the printer driver. User-defined paper sizes 
that have created and saved as described below can be 
selected using the applicatio n page setup option. If your 
application supports creating user defined sizes, follow 
the steps below to select the same size that was created in 
the application, and...

Length *Windows: 254–3,276.7 mm 
Mac OS X: 254–1,117.6 mm
Roll paper
Width Windows: 89–329 mm
Mac OS X: 203.2–329 mm 
Length *Windows: 55–3,276.7 mm 
Mac OS X: 55–1,117.6 mm
* The paper length can be longer if the application supports 
banner printing. However, the actual print size depends on 
the application, the paper size loaded in the printer, and the
computer environment.
Making Settings in Windows
A
When the printer driver's  Main screen is 
displayed, click  User Defined. 
U  “Basic Printing...

U “Basic Printing Methods(Mac OS X)” on 
page 28
B
Click  +, and then enter the paper size name.
C
Enter the Width, Height for the Paper Size, and 
enter the margins, and then click  OK. 
You can set the page size and printer margins 
depending on the  printing method.
Tip: 
❏ To change the contents that you saved, select 
the paper size name from the list on the left of 
the  Custom Paper Sizes screen. 
❏ To duplicate the user-defined size you saved, 
select the paper size name from the list on the...

Banner printing (on roll 
paper)
You can print banners and panoramic pictures if you 
create and set print data for banner printing in your 
application.
There are two ways to print a banner.
Printer Driver SourceSupported Applications 
Roll paper Document preparation 
software, image editing 
software, and so on*
Roll paper (Banner) Applications that support 
banner printing
* Create print data at a size supported by the given application 
while maintaining the printing length and width ratio.
The...

C
Select an option for Size that corresponds to the 
size of the document created in the application. 
Select  User Defined Paper Size to specify a 
non-standard paper size. 
U  “User-defined Paper Sizes/Custom Paper 
Sizes” on page 63
Tip: 
If you are printing from applications that support 
banner printing, you do not need to set  User 
Defined Paper Size  if you select Roll Paper 
(Banner)  as the Source.
D
Scale the output as desired. 
U  “Enlarged/Reduced Printing” on page 53
Tip: 
If you are...

To choose a non-standard paper size, select 
Manage Custom Sizes  for Paper Size. 
U  “User-defined Paper Sizes/Custom Paper 
Sizes” on page 63
B
Scale the output as desired. 
U  “Enlarged/Reduced Printing” on page 53
C
Check other settings and start printing.
Layout Manager 
(Windows only)
The Layout Manager functi on allows you to place 
multiple pieces of print data created in different 
applications on the paper fr eely and print them at once. 
You can create a poster or display material by placing...

Placing the same data
Placing data freely
Placing data on roll paper
Setting Procedures for Printing
A
Check that the printer is connected and ready to 
print.
B
Open the file you want to print in your
application.
C
Select  Layout Manager in the Main tab of the 
printer driver and choose an option for  Size that 
matches the size of the document created in the 
application. 
U  “Basic Printing Methods(Windows)” on 
page 27
Tip: 
The option selected for  Size is the size used in the 
Layout Manager . The...

F
Arrange the objects on the Layout Manager 
screen. 
You can drag objects to move and resize them, 
use tool buttons and the  Object menu to align 
and rotate objects on the  Layout Manager 
screen. 
You can resize and replace whole objects in the 
Preference or Arrangement Settings screens. 
See the  Layout Manager screen help for more 
details on each function.
G
Click  File - Properties, and make print settings 
on the printer driver screen.
Set  Media Type, Source, Size, and so on.
H
Click the File...