Epson Stylus Photo R2000 User Manual

C
Select Auto Expand or Retain Size as the 
Method of Enlargement . If you select Auto 
Expand , set how much of the image goes beyond 
the edge of the paper as shown below.
Max Sizes larger than A4: 
Approximately 3mm past the top, 
4.5mm past the bottom, and 3.5mm
past the left and right edges 
A4 or smaller (excluding 100 × 148 
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.): 
Approximately 3 mm past the top, 
4mm past the bottom, and 2.5 mm 
past the left and right edges 
100 × 148 mm, 9 × 13...

Max Sizes larger than A4: 
Approximately 3mm past the top, 
4.5mm past the bottom, and 3.5mm 
past the left and right edges 
A4 or smaller (excluding 100 × 148 
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15 
cm/4 × 6 in.): 
Approximately 3 mm past the top, 
4mm past the bottom, and 2.5 mm
past the left and right edges 
100 × 148 mm, 9 × 13 cm/3.5 × 5 in., 
10 × 15 cm/4 × 6 in.: 
Approximately 1.3 mm past the top, 
2.5 mm past the bottom, and 2.5 mm 
past the left and right edges 
Mid ½ of Max 
Min ¼ of Max
You...

Enlarged/Reduced 
Printing
You can enlarge or reduce the size of your data. There 
are three setting methods. 
❏ Fit to Page printing 
Automatically enlarges or reduces the image to fit 
the paper.
❏ Fit to Roll Paper Width (Windows only) 
Automatically enlarges or reduces the image to fit 
the width of the roll paper.
❏ Custom 
You can specify the enlarg ement or reduction ratio. 
Use this method for a no n-standard paper size.
Fit to Page/Scale to fit paper size
Making Settings in Windows
A
When the...

B
Select the size of the paper loaded in the printer 
from the  Output Paper list. 
Fit to Page  is selected for Reduce/Enlarge.
C
Check other settings and start printing.
Making Settings for Mac OS X
A
Open the Print screen, select Paper Handling 
from the list, and then check  Scale to fit paper 
size . 
U  “Basic Printing Methods(Mac OS X)” on 
page 28 
For Mac OS X 10.5 or 10.6
For Mac OS X 10.4
B
Select the size of the paper loaded in the printer as 
the  Destination Paper Size.
Tip: 
When...

Fit to Roll Paper Width 
(Windows only)
A
Display the printer driver  Main tab and select 
Roll Paper  for Source. 
U  “Basic Printing Methods(Windows)” on 
page 27
B
Display the  Page Layout tab and choose a Page 
Size  that matches the page size used in the 
document size.
C
Select  Reduce/Enlarge and click Fit to Roll 
Paper Width .
D
Select the width of the roll paper loaded in the 
printer from the  Roll Width list.
E
Check other settings and start printing.
Custom Scale Setting
Making Settings in...

Select the scale within a range of 10 to 650 %.
D
Check other settings and start printing.
Making Settings for Mac OS X
A
When the Print screen is displayed, select the size 
of the paper loaded in the printer from the  Paper 
Size  list. 
When using Mac OS X 10.4,  or if items on the 
Page Setup screen are no t displayed on the Print 
screen due to the application being used in Mac
OS X 10.6 or 10.5, display the Page Setup screen
and make settings. 
U  “Basic Printing Methods(Mac OS X)” on 
page 28
B...

Multi-Page Printing
You can print multiple pages of your document on one 
sheet of paper. 
If you print continuous data prepared at A4 size, it is 
printed as shown below.
Tip: 
❏ In Windows, you cannot use the Multi-Page 
printing function when performing borderless
printing. 
❏ In Windows, you can use the reduce/enlarge 
function (Fit to Page) to  print the data on different 
sizes of paper. 
U  “Enlarged/Reduced Printing” on page 53
Making Settings in Windows
A
When the printer driver's Page...

Making Settings for Mac OS X
A
When the Print screen is displayed, select Layout 
from the list, and then specify the number of 
pages per sheet and so on. 
U  “Basic Printing Methods(Mac OS X)” on 
page 28
Tip: 
You can print frames around arranged pages using 
the  Border function.
B
Check other settings and start printing.
Manual Double-Sided 
Printing
(Windows only)
You can easily print on bo th sides of the paper by 
printing out all even numbered pages and then flipping 
those pages over and...

U “Basic Printing Methods(Windows)” on 
page 27
Tip: 
❏ You can set the Binding Edge and Binding 
Margin  by clicking on Margins. Depending on 
the application, the specified binding margin
and the actual print result may differ.
❏ Select Folded Booklet to print out as a booklet. 
In the example figure shown below, the pages 
that appear on the inside when the page is
folded in two (pages 2, 3, 6, 7, 10, 11) are
printed first.
C
Check other settings and start printing.
D
When the odd pages have finished...

Setting Procedures for Printing
A
Prepare the print data using applications. 
The printer driver automatically enlarges the 
image data when printing.
B
When the printer driver's  Page Layout screen is 
displayed, select the  Multi-Page check box, select 
Poster , and then click Settings. 
U  “Basic Printing Methods(Windows)” on 
page 27
C
In the  Poster Settings screen, select the number 
of pages you want in the poster.
D
Select borderless poster printing or poster
printing with margins, and then...