Epson Projector Pro G7400U User Manual
Have a look at the manual Epson Projector Pro G7400U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
211 On/Standby (power) light Status light Lamp light Temp light Filter light Status andsolution Off Flashing blue Off Flashing orange Off A fan orsensor hasaproblem. Turn the projector off,unplug it,and contact Epsonforhelp. Flashing blue Varies Flashing orange Varies Varies The lamp ispast itsreplacement period andneeds tobe replaced to avoid damage. Donot continue using the projector. Note: Ifthe lights display apattern notlisted inthe table above, turntheprojector off,unplug it,and contact Epsonforhelp. Parent topic:Solving Problems Related references Projector FeatureSettings -Settings Menu Projector SetupSettings -Extended Menu Where toGet Help Related tasks Cleaning theAirFilter Replacing theAirFilter Replacing theLamp Using theProjector HelpDisplays You candisplay information tohelp yousolve common problems usingtheprojectors Helpsystem. 1. Turn onthe projector. 2. Press theHelp button onthe remote control. You seetheHelp menu. 3. Use theupand down arrow buttons tohighlight theproblem youwant tosolve. 4. Press Entertoview thesolutions. 5. When youarefinished, doone ofthe following: • To select another problem tosolve, pressEsc.
212 • To exit thehelp system, pressHelp. Parent topic:Solving Problems Solving ImageorSound Problems Check thesolutions inthese sections ifyou have anyproblems withprojected imagesorsound. Solutions WhenNoImage Appears Solutions WhenNo Signal Message Appears Solutions WhenNot Supported Message Appears Solutions WhenOnlyaPartial ImageAppears Solutions WhentheImage isNot Rectangular Solutions WhentheImage Contains NoiseorStatic Solutions WhentheImage isFuzzy orBlurry Solutions WhentheImage Brightness orColors areIncorrect Solutions Whena3D Image DoesNotDisplay Correctly Solutions toSound Problems Parent topic:Solving Problems Solutions WhenNoImage Appears If no image appears, trythe following solutions: • Make surethelens capisoff. • Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily turnedoff. • Make sureallnecessary cablesaresecurely connected andthepower ison for the projector and connected videosources. • Press theprojectors powerbutton towake itfrom standby orsleep mode. Alsoseeifyour connected computer isin sleep mode ordisplaying ablank screen saver. • Press theMenu button. Ifthe projector menuisable todisplay, theremaybeaproblem withthe connected videosource, cableconnection, orport. • Check thesettings onthe Signal menutomake suretheyarecorrect forthe current videosource. • Adjust theBrightness settingorselect theNormal PowerConsumption setting. • Check theDisplay settingtomake sureMessages isset toOn . • Ifthe projector doesnotrespond whenyoupress thecontrol panelbuttons, thebuttons maybe locked. Unlockthebuttons.
213 • Ifthe projector doesnotrespond whenyoupress buttons onthe remote control, makesuretheremote receivers areturned on. • For images projected withWindows MediaCenter, reducethescreen sizefrom fullscreen mode. • For images projected fromapplications usingWindows DirectX,turnoffDirectX functions. Parent topic:Solving ImageorSound Problems Related references Projector FeatureSettings -Settings Menu Projector SetupSettings -Extended Menu Image Quality Settings -Image Menu Input Signal Settings -Signal Menu Related tasks Unlocking theProjector s Buttons Solutions WhenNo Signal Message Appears If the No Signal message appears,trythe following solutions: • Press theSearch buttonandwait afew seconds foranimage toappear. • Turn onthe connected computerorvideo source, andpress itsplay button tobegin yourpresentation, if necessary. • Check theconnection fromtheprojector toyour video sources. • Ifyou areprojecting fromalaptop computer, makesureitis set uptodisplay onanexternal monitor. • Ifnecessary, turntheprojector andtheconnected computerorvideo source offand then onagain. • Ifthe other solutions donot solve theproblem, resetallofthe settings usingtheReset menu. Displaying FromaPC Laptop Displaying FromaMac Laptop Parent topic:Solving ImageorSound Problems Related concepts Projector Connections Displaying FromaPC Laptop If you seetheNo Signal message whenyoudisplay fromaPC laptop, youneed toset upthe laptop to display onanexternal monitor.
214 1. Hold down thelaptops Fnkey and press thekey labelled withamonitor iconorCRT/LCD .(See your laptop manual fordetails.) Waitafew seconds foranimage toappear. 2. Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain. 3. Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto make suretheexternal monitorportisenabled andextended desktopmodeisdisabled. (Seeyour computer orWindows manualforinstructions.) 4. Ifnecessary, checkyourvideo cardsettings andsetthe multiple displayoptiontoMirror or Duplicate . Parent topic:Solutions WhenNo Signal Message Appears Displaying FromaMac Laptop If you seetheNo Signal message whenyoudisplay fromaMac laptop, youneed toset upthe laptop for mirrored display.(Seeyourlaptop manual fordetails.) 1. Open theSystem Preferences utilityandselect Displays . 2. Click theArrangement tab. 3. Select theMirror Displays checkbox. Parent topic:Solutions WhenNo Signal Message Appears Solutions WhenNot Supported Message Appears If the Not Supported messageappears,trythe following solutions: • Make surethecorrect inputsignal isselected onthe Extended menu. • Make surethecomputers displayresolution doesnotexceed theprojectors resolutionandfrequency limit. Ifnecessary, selectadifferent displayresolution foryour computer. (Seeyourcomputer manual for details.) • As atest, trysetting thecomputers displayresolution tothe lowest possible setting,andthen gradually increaseitas necessary. Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Supported VideoDisplay Formats
215 Solutions WhenOnlyaPartial ImageAppears If only apartial computer imageappears, trythe following solutions: • Make sureyouselected thecorrect Screen Typesetting forthe screen beingused. • Make suretheScale setting inthe Extended menuisturned off. • Try adjusting theimage position usingthePosition menusetting. • Try adjusting theimage position usingtheScreen Position menusetting. • Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button untilthe projector returnstoafull display. • Check thecables connecting thecomputer orvideo source tothe projector. Tryconnecting different cables. • Check yourcomputer displaysettings todisable dualdisplay andsetthe resolution withinthe projectors limits.(Seeyourcomputer manualfordetails.) • Check theresolution assignedtoyour presentation filestosee ifthey arecreated foradifferent resolution thanyouareprojecting in.(See yoursoftware helpfordetails.) Parent topic:Solving ImageorSound Problems Related references Projector FeatureSettings -Settings Menu Input Signal Settings -Signal Menu Supported VideoDisplay Formats Related tasks Adjusting theImage Position UsingLensShift Setting theScreen Type Solutions WhentheImage isNot Rectangular If the projected imageisnot evenly rectangular, trythe following solutions: • Place theprojector directlyinfront ofthe center ofthe screen, facingitsquarely, ifpossible. • Ifyou adjusted theprojector heightusingtheprojector feet,press thekeystone buttonsonthe projector toadjust theimage shape. • Adjust theimage shape usingtheGeometric Correction menusettings. • Adjust theQuick Corner settingtocorrect theimage shape. Parent topic:Solving ImageorSound Problems
216 Related concepts Image Shape Related references Projector FeatureSettings -Settings Menu Solutions WhentheImage Contains NoiseorStatic If the projected imageseems tocontain electronic interference (noise)orstatic, trythe following solutions: • Check thecables connecting yourcomputer orvideo source tothe projector. Theyshould be: • Separated fromthepower cordtoprevent interference • Securely connected atboth ends • Not connected toan extension cable • No longer than10feet (3m) forVGA/computer cablesor24 feet (7.3 m)forHDMI cables • Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If available foryour video source, adjusttheNoise Reduction setting. • Select acomputer videoresolution andrefresh ratethatarecompatible withtheprojector. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust thetracking andsync. Ifthe problem remains, displayauniformly patterned imageonthe screen andmanually adjusttheTracking andSync settings. • Ifyou adjusted theimage shape usingtheprojector controls,trydecreasing theSharpness settingto improve imagequality. • Ifyou connected anextension powercable,tryprojecting withoutitto see ifitcaused interference in the signal. • Try adifferent cable. • Try turning offFrame Interpolation ,or turn onImage Enhancement inthe Image menu. Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Supported VideoDisplay Formats Related tasks Displaying FromaPC Laptop
217 Displaying FromaMac Laptop Solutions WhentheImage isFuzzy orBlurry If the projected imageisfuzzy orblurry, trythe following solutions: • Adjust theimage focus. • Clean theprojector lens. Note: Toavoid condensation onthe lens after bringing theprojector infrom acold environment, letthe projector warmuptoroom temperature beforeusingit. • Try connecting theprojector tothe highest qualityconnection availableonyour input source. For example, connecttoan HMDI portorcomponent videoportsforabetter quality inputsignal. • Position theprojector closeenough tothe screen. • Position theprojector sothe keystone adjustment angleisnot sowide thatitdistorts theimage. • Adjust theSharpness settingtoimprove imagequality. • Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically adjust thetracking andsync. Ifany bands oroverall blurriness remain,displayauniformly patterned image onthe screen andmanually adjusttheTracking andSync settings. • Ifyou areprojecting fromacomputer, tryusing alower resolution ortry tomatch theprojectors native resolution. Parent topic:Solving ImageorSound Problems Related references Input Signal Settings -Signal Menu Image Quality Settings -Image Menu Projection Distance Related tasks Cleaning theLens Focusing theImage UsingtheFocus Button Solutions WhentheImage Brightness orColors areIncorrect If the projected imageistoo dark orlight, orthe colors areincorrect, trythe following solutions: • Press theColor Mode button onthe remote controltotry different colormodes forthe image and environment.
218 • Check yourvideo source settings. • Adjust theavailable settingsonthe Image menuforthe current inputsource, suchasBrightness , Contrast ,Tint ,Advanced ,and Color Saturation . • Make sureallthe cables aresecurely connected tothe projector andyour video device. Ifyou connected longcables, tryconnecting shortercables. • Ifyou areusing theECO Power Consumption setting,tryselecting Normalinthe projectors menus. • Position theprojector closeenough tothe screen. • Ifthe image hasbeen progressively darkening,youmay need toreplace theprojector lampsoon. Parent topic:Solving ImageorSound Problems Related concepts Projector LampMaintenance Related references Projector FeatureSettings -Settings Menu Input Signal Settings -Signal Menu Image Quality Settings -Image Menu Solutions Whena3D Image DoesNotDisplay Correctly If a 3D image doesnotdisplay correctly, trythe following solutions: • Press the2D/3D buttononthe remote controltoswitch to3D mode, ifnecessary. Youcanalso activate 3Dmode bysetting the3DDisplay settingonthe Signal menutoOn . • Make sureyourvideo device andmedia areboth 3D-compatible. Refertothe documentation that came withyour video device formore information. • Make sureyouareusing HDMI cables thatsupport 3Dsignals. Ifyou areusing asplitter, makesureit also supports 3Dsignals. • Make sureyouareprojecting ontoasilver screen (recommended gain:2.3to2.7). • Make sureyouselected thecorrect 3DFormat settingonthe Signal menu.Normally thisshould be set toAuto ,but insome cases youmay need toselect adifferent settingtomatch the3Dsignal from your video device. • Make sureyouareusing thesupplied 3Dglasses orthe optional glassessoldbyEpson. Theglasses supplied andsold byEpson arespecifically designedforuse with thisproduct. Otherpassive 3D glasses maynotwork.
219 • Make surethepolarizing filtersareattached correctly. Thenumber oneach filtershould matchthe number onthe projector towhich itis attached. Seeyour Setup Guide forinstructions. • Make sureyouarewithin the3Dviewing range.Alsomake suretoposition theproduct closeenough to the screen. • Ifthe other solutions donot notsolve theproblem, changetheInverse 3DImage setting onthe Signal menu. Return thesetting toits original valueifchanging itdoes notsolve theproblem. Parent topic:Solving ImageorSound Problems Related references Optional Equipment andReplacement Parts Related tasks Viewing 3DImages Solutions toSound Problems If there isno sound whenyouexpect itor the volume istoo low orhigh, trythe following solutions: • Adjust theprojectors volumesettings. • Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily stopped. • Press theSource SearchorSearch buttontoswitch tothe correct inputsource, ifnecessary. • Check yourcomputer orvideo source tomake surethevolume isturned upand theaudio output isset for the correct source. • Check theaudio cableconnections betweentheprojector andyour video source. • Ifyou donot hear sound fromanHDMI source, setthe connected devicetoPCM output. • Make sureanyconnected audiocables arelabeled NoResistance. • Ifyou areusing aMac andyoudonot hear sound fromanHDMI source, makesureyourMac supports audiothrough theHDMI port.Ifnot, youneed toconnect anaudio cable. • Make suretheAudio Output optionisset tothe correct audioportforyour video device. • Ifyou turn theprojector onimmediately afterturning itoff, the cooling fansmayrunathigh speed momentarily andcause anunexpected noise.Thisisnormal. Parent topic:Solving ImageorSound Problems Related tasks Connecting toExternal Speakers
220 Solving Projector orRemote ControlOperation Problems Check thesolutions inthese sections ifyou have problems operating theprojector orremote control. Solutions toProjector PowerorShut-Off Problems Solutions toProblems withtheRemote Control Solutions toPassword Problems Parent topic:Solving Problems Solutions toProjector PowerorShut-Off Problems If the projector doesnotcome onwhen youpress thepower button oritshuts offunexpectedly, trythe following solutions: • Make surethepower cordissecurely connected tothe projector andtoaworking electrical outlet. • The projectors buttonsmaybelocked forsecurity. Unlockthebuttons oruse theremote controlto turn onthe projector. • Ifthe projectors lampshuts offunexpectedly, itmay have entered standby modeafteraperiod of inactivity. Pressthepower button towake theprojector andadjust theSleep ModeTimer setting to change thesleep interval. • Ifthe projectors lampshuts offand thepower andTemp lightsarered, theprojector hasoverheated and shut off.Check thesolutions forthis light status. • Ifthe power button onthe remote controldoesnotturn onthe projector, checkitsbatteries andmake sure theRemote Receiver settingisturned oninthe projectors menu,ifavailable. • The power cordmaybedefective. Disconnect thecord andcontact Epson. Parent topic:Solving Projector orRemote ControlOperation Problems Related references Projector FeatureSettings -Settings Menu Projector LightStatus Related tasks Unlocking theProjector s Buttons Solutions toProblems withtheRemote Control If the projector doesnotrespond toremote controlcommands, trythe following solutions: • Check thattheremote controlbatteries areinstalled correctly andhave power. Ifnecessary, replace the batteries.