Epson Projector Pro G7400U User Manual

							

151
Related
concepts
 Color
Mode
 Adjusting
theColor Tone(Color Uniformity)
 You
canusetheColor Uniformity featuretomanually adjustthecolor tonebalance inthe projected
 image.

1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theDisplay settingandpress Enter.
 4.
Select theColor Uniformity settingandpress Enter.
 5.
Press Enterandselect On.
 6.
Press Esc.
 7.
Select theAdjustment Levelsetting andpress Enter.
 8.
Press theright andleftarrow buttons toadjust thelevel, thenpress Esc. 
						

							

152
9.
Select theStart Adjustments settingandpress Enter.
 10.
Select thearea ofthe screen thatyouwant toadjust andpress Enter.
 11.
Select thecolor (Red ,Green ,or Blue )you want toadjust, andusetheleftarrow button toweaken
 the
color toneandtheright arrow button tostrengthen thecolor tone.
 12.
Press Esc.
 13.
Repeat steps10and 11for each areayouwant toadjust.
 14.
When youarefinished, presstheMenu button.
 Parent
topic:UsingMultiple Projectors
 Adjusting
theColor Convergence (PanelAlignment)
 You
canusethePanel Alignment featuretomanually adjustthecolor convergence (thealignment ofthe
 red,
green andblue colors) inthe projected image.
 Note:
Allowyourprojector towarm upfor atleast 10to15 minutes andmake suretheimage isin focus
 before
youusethePanel Alignment feature.Theprojected imagesizeshould beatleast 60inches (152
 cm)
diagonally andtheprojection surfaceshouldnotbecolored ortextured; otherwise theadjustment
 grids
aredifficult toalign.
 1.
Press theMenu button. 
						

							

153
2.
Select theExtended menuandpress Enter.
 3.
Select theDisplay settingandpress Enter.
 4.
Select thePanel Alignment settingandpress Enter.
 5.
Press Enterandselect On.
 6.
Press Esc.
 7.
Select theSelect Colorsetting andchoose oneofthe following:
 •
Rto adjust thered color convergence
 •
Bto adjust theblue color convergence
 Note:
Youcanadjust onlythered orblue color convergence; youcannot adjustthestandard green
 color
panel.
 8.
Select thePattern Colorsetting andpress Enter.
 9.
Select thepattern youwant touse and press Esc.
 10.
Select StartAdjustments andpress Enter twice. 
						

							

154
You
seethisscreen:
 11.
Use thearrow buttons onthe remote controltoadjust thecolor alignment inthe corner ofthe screen
 highlighted
bythe orange box.
 12.
Press theEnter button tomove tothe next corner ofthe screen.
 13.
When youarefinished adjusting eachcorner ofthe screen, pressEnter.
 You
seethisscreen: 
						

							

155
14.
Doone ofthe following:
 •
Ifyour projectors panelalignment isnow correct, selectExitandpress Enter toreturn tothe
 Panel
Alignment menu.
 •
Ifyour projector needsadditional panelalignment, selectSelect intersection andadjust and
 press
Enter.Use thearrow keysonthe remote controltohighlight thecorner ofany boxonthe
 screen
thatismisaligned andpress Enter toadjust thecolor convergence. Repeatthisstep as
 necessary.

Parent
topic:UsingMultiple Projectors
 Configuring
Tiling
 You
canproject thesame image frommultiple projectors tocreate onelarge image. Youcanusetoup to
 nine
projectors.
 1.
SetanIDfor each projector andadjust theposition ofthe projected images.
 2.
Adjust overlapping areasofthe screen usingEdge Blending .
 3.
Select theExtended menuandpress Enter.
 4.
Select theMulti-Projection menuandpress Enter.
 5.
Select theTiling menuandpress Enter.
 6.
Select theLayout menuandpress Enter.
 7.
Setthenumber ofprojectors inthe Row andColumn settings, selectSet,and press Enter.
 8.
Adjust theEdge Blending andLayout settings foreach projector usedfortiling. 
						

							

156
9.
Select theLocation Setupmenuandpress Enter.
 10.
Settheposition ofeach projected imageinRow Order andColumn Order.
 Row
Order :Layout thescreens fromtoptobottom insequential order,starting with1at the top.
 Column
Order:Layout thescreens fromlefttoright, starting withAon the left.
 11.
Choose theinput signal andproject theimage.
 12.
Select Extended >Multi-Projection >Scale ,select Auto,and press Enter.
 The
scale andcliprange areautomatically setaccording tothe blending width.
 13.
Fine tune anyofthe overlapping areasofthe screens usingEdge Blending orany ofthe other
 distortion
correcting tools.
 Parent
topic:UsingMultiple Projectors
 Enabling
ProtocolEmulation
 You
canuseprotocol emulation tocontrol yourprojector withthesame RS-232 controlcodesasthose
 used
bythe manufacturers ofother projectors. Thisletsyou control agroup ofprojectors fromacommon
 controller.

1.
Make suretheprojector isturned on.
 2.
Connect acontroller tothe RS-232C portonthe projector.
 3.
Doone ofthe following:
 •
Press andhold theTest Pattern buttononthe remote controlforatleast fiveseconds.
 •
Select theExtended menu,highlight theStandby Modesetting, andhold down theright arrow
 button
onthe remote controlorprojector controlpanelforatleast fiveseconds. 
						

							

157
You
seetheProtocol Emulation screen.
 4.
Select oneofthe following andpress Enter:
 •
Type Pfor Panasonic projectors
 •
Type Mfor Mitsubishi projectors
 •
Type Nfor NEC projectors
 •
Type Sfor Sony projectors
 5.
Turn theprojector offand onagain toenable thecontrol codeyouselected.
 Parent
topic:Adjusting ProjectorFeatures
 Viewing
3DImages
 Using
anoptional polarizer and3Dglasses, youcanusetwoprojectors toproject andview passive 3D
 images.
Seetheinstructions suppliedwiththeoptional equipment forsetup anduse.
 For
optimal viewing, selectthe3DImages settingfromtheSignal menuandselect oneofthe 3Dcolor
 modes.

Parent
topic:Adjusting ProjectorFeatures
 Related
references
 Optional
Equipment andReplacement Parts
 Input
Signal Settings -Signal Menu
 Saving
Settings toMemory andUsing Saved Settings
 You
cansave customized settingsforeach ofyour video inputs andthen select thesaved settings
 whenever
youwant touse them.
 1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 Note:
Youcanalso press theMemory buttononthe remote controltoaccess theMemory menu
 directly.

3.
Select theSettings menuandpress Enter.
 4.
Select theMemory settingandpress Enter.
 5.
Select theMemory settingandpress Enter. 
						

							

158
You
seethisscreen:
 6.
Select oneofthe following options:
 •
Load Memory :Overwrites yourcurrent settings withsaved settings
 •
Save Memory :Saves yourcurrent settings tomemory (10memories withdifferent namesare
 available)

Note:
Amemory namethathasalready beenusedisindicated byablue mark. Saving overa
 previously
savedmemory overwrites thesettings withyour current settings.
 •
Erase Memory :Erases theselected memorysettings
 •
Rename Memory:Renames asaved memory
 •
Reset Memory :Delete allsaved memory
 7.
Press Esctoexit.
 Parent
topic:Adjusting ProjectorFeatures
 Saving
aScheduled Event
 You
canselect projector commands youwant toperform andschedule themasan event.
 1.
Press theMenu button. 
						

							

159
2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 The
Schedule Settingsscreenappears.
 4.
Select theSchedule menuandpress Enter.
 5.
Select AddNew andpress Enter.
 6.
Inthe Event Settings section,selecttheevents youwant tohave occur. (Select NoChange for
 events
thatyoudonot want tooccur.)
 7.
Inthe Date/Time Settingssection,setthe date andtime forthe scheduled eventstooccur.
 8.
When youarefinished, selectSaveandpress Enter.
 9.
Toschedule moreevents, repeattheprevious stepsasnecessary.
 10.
Select Setup complete andselect Yestosave yourchanges.
 Viewing
Scheduled Events
 Editing
aScheduled Event
 Parent
topic:Adjusting ProjectorFeatures
 Viewing
Scheduled Events
 You
canview anycurrently scheduled events.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 You
seeascreen likethis:  
						

							

160
The
colored boxesinthe calendar indicatethefollowing aboutthescheduled events:
 One-time
event
 Reoccurring
event
 Communication
ison/off
 Event
isinvalid
 Parent
topic:Saving aScheduled Event
 Editing
aScheduled Event
 You
caneditany currently scheduled event.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theSchedule Settingssettingandpress Enter.
 You
seeascreen likethis:
 4.
Press theleftorright arrow buttons tohighlight thedate onthe calendar containing thescheduled
 event
youwant toedit.
 5.
Press theupordown arrow buttons tohighlight theevent youwant toedit, andpress Esc.
 6.
Select oneofthe following:
 •
On/Off :Enable ordisable theselected event.
 •
Edit :Edit thesettings forthe selected event.
 •
Clear :Delete theselected event.