Epson Projector PowerLite Pro G6870 User Manual

							3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Securitymenu and press Enter.
6. Select a WPAorEAP setting from the drop-down menu.
71 
						

							7. Select the settings on the security menu as necessary for your network.
8. When you finish selecting settings, select
Setup completeand follow the on-screen instructions to
save your settings and exit the menus.
Wireless Security Menu Settings
Parent topic: Wireless Network Projection
Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the
network you are connecting the projector to.
Setting OptionsDescription
Security OpenSelects the type of security used
on the wireless network
WPA2-PSK(AES)
WPA/WPA2-PSK
WPA/WPA2-EAP
Passphrase Various passphrases from 8 to For WPA2-PSK and
63 charactersWPA/WPA2-PSK security,
selects the pre-shared
passphrase used on the network
(You can enter up to 32
characters in the projector menu.
To input more than 32
characters, use your Web
browser. )
In Quick mode, the initial
passphrase is hidden. Change
the passphrase to connect using
Epson iProjection.
EAP Method PEAPFor WPA/WPA2-EAP security,
selects the protocol for
PEAP-TLS
authentication
EAP-TLS
EAP-Fast
LEAP
72 
						

							Setting
OptionsDescription
User name Various user names up to 64 For WPA/WPA2-EAP security,
charactersselects the user name;
automatically detected when
using thePEAP-TLS orEAP-
TLS EAP methods
(You can enter up to 32
characters in the projector menu.
To input more than 32
characters, use your Web
browser. )
Password Various passwords up to 64 For WPA/WPA2-EAP security,
charactersselects the password for EAP
authentication
(You can enter up to 32
characters in the projector menu.
To input more than 32
characters, use your Web
browser. )
Client Certificate —For WPA/WPA2-EAP security,
displays the certificatesIssued
to, Issued by, and Validity
period if a client certificate has
been set
Verify Server Certificate On For WPA/WPA2-EAP security,
selects whether to verify the
Off
server certificate when a CA
certificate has been set
CA certificate —For WPA/WPA2-EAP security,
displays the certificatesIssued
to, Issued by, and Validity
period if a CA certificate has
been set
73 
						

							Setting
OptionsDescription
Setting RADIUS Server Name On For WPA/WPA2-EAP security,
selects whether to verify the
Off
authentication server name
during certificate verification
RADIUS Server Name Various server names up to 32 For WPA/WPA2-EAP security,
charactersselects the server name to verify
Verify Exp. date of Server Cert. On For WPA/WPA2-EAP security,
selects whether to verify the
Off
server certificates validity period
during certificate verification
Parent topic: Enabling WPA or EAP Security
Registering a Digital Certificate on the Projector Follow the instructions here if you need to install a digital certificate on the projector to provide security
for your presentation files (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU).
Note:You can register a digital certificate over a network. However, be sure to register just once or the
certificate may not install correctly.
Secure HTTP
Registering Digital Certificates from a Web Browser
Parent topic: Using the Projector on a Network
Secure HTTP You can use the HTTPS protocol to increase security between the projector and a web browser
communicating with it. To do this, you create a server certificate, install it on the projector, and turn on
theSecure HTTP setting in the projector menus to verify the reliability of the web browser.
Even if you do not install a server certificate, the projector automatically creates a self-signed certificate
and allows communication. However, because the self-signed certificate cannot verify reliability from a
web browser, you see a warning about the servers reliability when you access the projector from a web
browser. This warning does not prevent communication.
Parent topic: Registering a Digital Certificate on the Projector
74 
						

							Registering Digital Certificates from a Web Browser
You can register the digital certificates on the projector for wireless LAN authentication.
1. Make sure your digital certificate file is compatible with projector registration.
2. Make sure the projector is turned on.
3. Start your web browser on a computer connected to the network.
4. Type the projectors IP address into the browsers address box and press the computers Enterkey.
You see the Web Control screen and a prompt to enter a user ID and password.
5. Enter the following information in uppercase or lowercase letters, exactly as shown: • For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the default password admin. (You can change the Web Control password
using the projectors Network menu.)
6. Under Network, select the Administrator Settings option and selectManage Certificates.
You see a screen like this:
75  
						

							7. Click the
Browsebutton, select the certificate file, and click Open.
8. Enter a password in the Passwordbox.
9. Click Setto adjust the certificate validity period.
10. When you finish registering the certificate, click Applyto finalize your changes and complete the
registration.
Digital Certificate Types for Registration via Web Control
Parent topic: Registering a Digital Certificate on the Projector
Digital Certificate Types for Registration via Web Control You can register these types of digital certificates using the projectors Web Control feature.
Client Certificate (PEAP-TLS/EAP-TLS)
Specification Description
Format PKCS#12
Extension PFX/P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Password Up to 32 alphanumeric characters; required
Server Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-Fast) Specification Description
Format X509v3
Extension DER/CER/PEM
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Encoding BASE64/Binary
Web Server Certificate (Secure HTTP)
76 
						

							Specification
Description
Format PKCS#12
Extension PFX/P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Common name Network host name
Organization Optional
Password Up to 32 alphanumeric characters; required
Parent topic: Registering Digital Certificates from a Web Browser
Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the
projector.
1. Press theMenubutton.
2. Select the Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Do one of the following: • Select the Mailmenu and press Enter. Turn onMail Notification.
77 
						

							PowerLite Pro G6870/G6970WU
• Select the Administrator Settings menu and pressEnter, then select Mail Notificationand
press Enter. Turn on Mail Notification.
PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU
78 
						

							5. Enter the IP address for the
SMTP Serveroption.
Note: To enter the IP address using the numeric keys on the remote control, press and hold the
Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
6. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
7. Choose an AddressorEmail Address field, enter the e-mail address, and select the alerts you
want to receive there. Repeat for up to three addresses.
Note: Your e-mail address can be up to 32 alphanumeric characters long.
8. When you finish selecting settings, select CompleteorSetup complete and follow the on-screen
instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Network Projector E-mail Alert Messages
Parent topic: Using the Projector on a Network
Network Projector E-mail Alert Messages When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you
receive an e-mail containing the following information:
•Epson Projector on the subject line
• The name of the projector experiencing a problem
• The IP address of the affected projector
• Detailed information about the problem
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Parent topic: Setting Up Projector Network E-Mail Alerts
79 
						

							Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
1. Press theMenubutton.
2. Select the Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Do one of the following: • Select the Othersmenu and press Enter.
PowerLite Pro G6870/G6970WU
• Select the Administrator Setting menu and pressEnter, then select the SNMPmenu and press
Enter.
80