Epson Projector PowerLite Pro G6870 User Manual

							13. When you are finished, press the
Menubutton to exit.
Parent topic: Using Multiple Projectors
Matching the Image Colors You can match the display quality of multiple projectors that will project next to each other.
Note:Make sure you select Multi-Projectionor3D Multi-Projection (for 3D images) for the color
mode. Brightness and colors may not match exactly even after performing the steps below.
1. Press the Menubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Multi-Projection setting and pressEnter.
4. Select the Multi-screensetting and press Enter.
You see this screen:
Note: PressEnterto toggle between the projected image and the adjustment screen.
5. Set the Adjustment Level setting to1and press Enter.
6. Set the remote control ID to match the second projector.
7. Access the Extended menu Multi-screensetting on the second projector and set the Adjustment
Level setting to 1.
8. Adjust the Brightness Correct. setting on the projector with the darkest display so it matches the
lighter display, and press Enter. (You may need to switch the remote control ID back and forth to
make adjustments to each projector in all of these steps.)
9. Change the Adjustment Level setting to5on each projector, but this time match the lighter display
to the darker one.
10. Adjust the Brightness Correct. setting onAdjustment Level 2, 3, and4in the same way.
161 
						

							11. Adjust the
Color Correct. settings for green-to-red ( G/R) and blue-to-yellow (B/Y) balance for all the
levels on both projectors in the same way.
12. If you need to match more projectors, repeat these steps matching projector 3 to projector 2, 4 to 3, and so on.
Parent topic: Using Multiple Projectors
Related concepts
Color Mode
Viewing 3D Images Using an optional polarizer and 3D glasses, you can use two projectors to project and view passive 3D
images. See the instructions supplied with the optional equipment for setup and use.
For optimal viewing, select the 3D Imagessetting from the Signal menu and select one of the 3D color
modes.
Parent topic: Adjusting Projector Features
Related concepts
Color Mode
Saving Settings to Memory and Using Saved Settings You can save customized settings for each of your video inputs and then select the saved settings
whenever you want to use them.
1. Turn on the projector and display an image.
2. Press theMenubutton.
3. Select the Settingsmenu and press Enter.
4. Select the Memorysetting and press Enter.
162 
						

							You see this screen:
5. Select one of the following options: •Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
6. Press Escto exit.
Parent topic: Adjusting Projector Features
Saving a Scheduled Event You can select projector commands you want to perform and schedule them as an event.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
163 
						

							3. Select the
Schedule Settings setting and pressEnter.
The Schedule Settings screen appears.
4. Select the Schedulemenu and press Enter.
5. Select Add Newand press Enter.
6. In the Event Settings section, select the events you want to have occur. (Select No Changefor
events that you do not want to occur.)
7. In the Date/Time Settings section, set the date and time for the scheduled events to occur.
8. When you are finished, select Saveand press Enter.
9. To schedule more events, repeat the previous 4 steps.
10. Select Setup complete and selectYesto save your changes.
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic: Adjusting Projector Features
Viewing Scheduled Events You can view any currently scheduled events.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Schedule Settings setting and pressEnter.
You see a screen like this:
The colored boxes in the calendar indicate the following about the scheduled events:
164  
						

							One-time event
Reoccurring event
Communication is on/off
Event is invalid
Parent topic: Saving a Scheduled Event
Editing a Scheduled Event You can edit any currently scheduled event.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Schedule Settings setting and pressEnter.
You see a screen like this:
4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit.
5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc.
6. Select one of the following: •On/Off: Enable or disable the selected event.
• Edit: Edit the settings for the selected event.
• Clear: Delete the selected event.
• Add New: Add a new scheduled event.
165  
						

							7. When you are finished, select
Returnand press Enter.
8. Select Setup complete and selectYesto save your changes.
Note: To delete all scheduled events, select Schedule Resetand selectYes.
Parent topic: Saving a Scheduled Event
Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note:Copy the projectors settings before you adjust the projected image using the projectors
Geometric Correction settings. Any saved Users Logo setting on the projector will transfer to the other
projector.
Caution: If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors:
• Info menu items
• Network menu settings other than those in the Mail and Others menus
Note: In addition to the methods covered this section, you can also copy and transfer settings to multiple
projectors over a network using the EasyMP Network Updater software. See the EasyMP Network
Updater Operation Guide for instructions. You can download the latest software and documentation from
the Epson web site. Go to epson.com/support(U.S.) orepson.ca/support (Canada) and select your
projector.
Saving Settings to a USB Flash Drive
Transferring Settings From a USB Flash Drive
Saving Settings To a Computer
Transferring Settings From a Computer
Parent topic: Adjusting Projector Features
166 
						

							Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive (PowerLite Pro
G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU).
Note:Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
167   
						

							4. When the power, Lamp, and Temp lights turn orange, release the
Escbutton.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns orange and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Related references
Projector Light Status
Transferring Settings From a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU).
Note:Make sure the USB flash drive contains only a single settings transfer from another projector of
the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other
files, the transfer may not complete correctly.
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projectors power inlet.
168 
						

							2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
4. When the power, Lamp, and Temp lights turn orange, release the Menubutton.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns orange and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
169   
						

							5. Once the projector enters standby mode, remove the flash drive.
Parent topic:
Copying Menu Settings Between Projectors
Related references
Projector Light Status
Saving Settings To a Computer You can save the projector settings you want to transfer to a computer (PowerLite Pro
G6870/G6970WU).
Your computer must be running one of the following operating systems:
• Windows Vista
• Windows 7
• Windows 8.x
• OS X 10.5.8
• OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Connect a USB cable to your projectors Serviceport.
170