Epson Projector PowerLite Pro G6770WU User Manual

							Setting
OptionsDescription
Video Signal AutoSpecifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratiosheight ratio) for the selected input
source
Scale Various scale optionsWhen using multiple projectors to
project one image, adjusts the
scale of the image displayed by
each projector
Overscan AutoChanges the projected image
ratio to make the edges visible by
Off
a selectable percentage or
4% automatically
8%
Image Processing FastAdjusts how images are
processed
Fine
Fast: displays images quicker
Fine: displays images in higher
quality
DisplayPort EQ Setting 1 Adjusts the input signal level for
the device connected to the
2
DisplayPortconnector; change
to reduce interference or correct
other image problems
Parent topic: Adjusting the Menu Settings
Related references
Available Image Aspect Ratios
181 
						

							Projector Feature Settings - Settings Menu
Options on the Settings menu let you customize various projector features.
182 
						

							Setting
OptionsDescription
Geometric Correction H/V-KeystoneAdjusts the projected image
shape
Quick Corner
H/V Keystone: lets you manually
Arc Correction
correct the angles of the
(PowerLite Pro horizontal and vertical sides
G6070W/G6170/G6270W/G6470 Quick Corner: select to adjust
WU/G6570WU/G6770WU/)
the position of the four corners
Point Correction Arc Correction: select to adjust
Curved Surface the curve or arc of the horizontal
and vertical sides
(PowerLite Pro
G6870/G6970WU) Point Correction: select to
display a grid and finely adjust
Corner Wall
the image position
(PowerLite Pro Curved Surface: select to adjust
G6870/G6970WU)
the image when projecting on a
curved surface
Corner Wall: select to adjust the
image when projecting on a
surface with a right angle
Split Screen —Divides the viewing area
horizontally and displays two
images side-by-side; while in
Split Screen mode, pressMenu
to display the Split Screen
options or Escto cancel split
screen display
Control Panel Lock Full LockControls projector button locking
to secure the projector
Partial Lock
Full Lock: locks all buttons
Off
Partial Lock: locks all buttons
except the power button
Off: no buttons locked
183 
						

							Setting
OptionsDescription
Power Consumption NormalSelects the brightness mode of
the projector lamp
Temp Interlock
Normal: sets maximum lamp
ECO
brightness
Temp Interlock: automatically
dims the lamp if the surrounding
temperature is too high for
normal operation
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp life
Volume Varying levels available Adjusts the volume of the
projector’s speaker system
Remote Receiver Front/RearLimits reception of remote control
signals by the selected receiver;
Front
Offturns off all receivers
Rear
Off
User Button User Button 1Assigns a menu option to the
User1,User2, and User3
User Button 2
buttons on the remote control for
User Button 3 one-touch access
Test Pattern —Displays a test pattern to assist in
adjusting the image; press the
left or right arrow buttons on the
remote control orEnteron the
control panel to cycle through the
available test patterns, or Escto
cancel pattern display
Memory Load MemorySave customized sets of settings
to memory
Save Memory
Erase Memory
Rename Memory
184 
						

							Parent topic:
Adjusting the Menu Settings
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its
operation.
Setting OptionsDescription
Display —See the next table in this topic
Closed Caption OffControls use of closed captions
and selects the closed caption
CC1
type (closed captions are only
CC2 visible for NTSC signals
connected through the S-Video
or Video ports)
Users Logo —Creates a screen that the
projector displays to identify itself
and enhance security
185 
						

							Setting
OptionsDescription
Projection FrontSelects the way the projector
faces the screen so the image is
Front/Ceiling
oriented correctly
Rear
Rear Ceiling
Direction Varying levels available Selects the installation angle for
the projector; the projectors fan
may get louder depending on the
direction angle selected
Operation —See the last table in the topic
A/V Settings A/V OutputSelects various audio and video
output settings
Monitor Out
A/V Output: select to output
Audio Settings
audio and video to an external
device when the projector is in
standby mode (Standby Mode
must be turned on to use this
setting)
Monitor Out: Select the image
source to output to an external
device when the projector is in
standby mode; when set toAuto,
selects output from the
Computer orBNC port
depending on which was used
when the projector went into
standby mode
Audio Settings: Selects audio
source to output
186 
						

							Setting
OptionsDescription
Standby Mode Communication OnEnable this setting to allow the
following operations to occur
Communication Off
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an external device (A/V Output
must be set to Always On)
• Communication from the HDBaseT port (Control
Communications must be set
to On)
HDBaseT Control CommunicationsSelects the communication
settings for connections to an
Extron XTP
HDBaseT transmitter or switcher
Control Communications:
enables or disables
communication from the Ethernet
and serial ports on the
transmitter; turning on this setting
disables the projectorsLAN,RS-
232C, and Remoteports (Extron
XTP must be turned off to use
this setting)
Extron XTP: set to Onwhen you
connect an Extron XTP
transmitter or switcher to the
HDBaseT ports
187 
						

							Setting
OptionsDescription
Multi-Projection Brightness LevelSelect various options when
projecting from multiple
(not available for PowerLite Pro
projectors
G6470WU)
Brightness Level: adjusts the
Edge Blending
brightness of the lamp;Power
Multi-screen Consumptionin the Settings
menu must be set to Normalto
Projector ID
use this setting
Edge Blending: blends the
border between multiple images
to create a seamless screen
Multi-screen: adjusts the tint and
brightness of each projected
image
Projector ID: sets the projector
to a particular ID number which
allows you to use a remote
control to individually control
projectors
Schedule Settings —Schedule specific operations to
occur at a pre-scheduled time
Language Various languages available Selects the language for
projector menu and message
displays (not changed byReset
option)
Display settings
Setting Description
Menu Position Selects the position of the projector menu
displayed on the screen
Messages Controls whether messages are displayed on the
screen
188 
						

							Setting
Description
Display Background Selects the screen color or logo to display when no
signal is received
Startup Screen Controls whether a special screen appears when
the projector starts up
A/V Mute Selects the screen color or logo to display when
A/V Mute is turned on
Standby Confirmation Displays a confirmation message after pressing
theStandby button on the remote control
Air Filter Notice Displays a message when a clog in the air filter is
detected
Screen Sets the aspect ratio and position of the projected
image according to the type of screen being used
Panel Alignment Corrects color misalignment in the projected image
Color Uniformity Adjusts the color tone balance
Operation settings
Setting OptionsDescription
Direct Power On —Turns on the projector when you
plug it in
Sleep Mode —Automatically places the
projector in standby mode after
an interval of inactivity
Sleep Mode Timer 1 to 30 minutesSets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
High Altitude Mode —Regulates the projector’s
operating temperature at
altitudes above 4921 feet
(1500 m)
189 
						

							Setting
OptionsDescription
BNC Sync Termination —Sets the termination for the signal
from the BNC port (normally
should be off unless analog
termination such as for switchers
is necessary)
Remote Control Type NormalSelectNormal to use the remote
control that came with the
Simple
projector orSimpleto use a
different Epson projector remote
control and disable the remote
control that came with the
projector
Inv Direction Button —Enable this setting if you installed
the projector on a ceiling and
want to invert the arrow buttons
on the control panel
Startup Source Search —Automatically detects the image
signal when you turn on the
projector
A/V Mute Release A/V MuteSelectA/V Mute if you want to
use only the A/V Mutebutton to
All
turn off A/V mute, or selectAllto
use any button to turn it off
Beep —Turns on or off the beep that
sounds when you turn the
projector on or off
Lens Type Various lens model numbers Select the model number for the
attached lens
Instant Off EnabledSelectEnabled to place the
projector into standby status after
Disabled
power off orDisabledto send
the projector into standby status
approximately 3 minutes after
power off
190