Epson Projector PowerLite Pro G6570WU User Manual

3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Securitymenu and press Enter.
6. Select a WPAorEAP setting from the drop-down menu.
71 

7. Select the settings on the security menu as necessary for your network.
8. When you finish selecting settings, select
Setup completeand follow the on-screen instructions to
save your settings and exit the menus.
Wireless Security Menu Settings
Parent topic: Wireless Network Projection
Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the
network you are connecting the projector to.
Setting OptionsDescription
Security...

Setting
OptionsDescription
User name Various user names up to 64 For WPA/WPA2-EAP security,
charactersselects the user name;
automatically detected when
using thePEAP-TLS orEAP-
TLS EAP methods
(You can enter up to 32
characters in the projector menu.
To input more than 32
characters, use your Web
browser. )
Password Various passwords up to 64 For WPA/WPA2-EAP security,
charactersselects the password for EAP
authentication
(You can enter up to 32
characters in the projector menu.
To input more than 32...

Setting
OptionsDescription
Setting RADIUS Server Name On For WPA/WPA2-EAP security,
selects whether to verify the
Off
authentication server name
during certificate verification
RADIUS Server Name Various server names up to 32 For WPA/WPA2-EAP security,
charactersselects the server name to verify
Verify Exp. date of Server Cert. On For WPA/WPA2-EAP security,
selects whether to verify the
Off
server certificates validity period
during certificate verification
Parent topic: Enabling WPA or EAP Security...

Registering Digital Certificates from a Web Browser
You can register the digital certificates on the projector for wireless LAN authentication.
1. Make sure your digital certificate file is compatible with projector registration.
2. Make sure the projector is turned on.
3. Start your web browser on a computer connected to the network.
4. Type the projectors IP address into the browsers address box and press the computers Enterkey.
You see the Web Control screen and a prompt to enter a user ID and...

7. Click the
Browsebutton, select the certificate file, and click Open.
8. Enter a password in the Passwordbox.
9. Click Setto adjust the certificate validity period.
10. When you finish registering the certificate, click Applyto finalize your changes and complete the
registration.
Digital Certificate Types for Registration via Web Control
Parent topic: Registering a Digital Certificate on the Projector
Digital Certificate Types for Registration via Web Control You can register these types of digital...

Specification
Description
Format PKCS#12
Extension PFX/P12
Encryption RSA
Hashes MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length 512/1024/2048/4096 bit
Common name Network host name
Organization Optional
Password Up to 32 alphanumeric characters; required
Parent topic: Registering Digital Certificates from a Web Browser
Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the
projector.
1. Press theMenubutton.
2....

PowerLite Pro G6870/G6970WU
• Select the Administrator Settings menu and pressEnter, then select Mail Notificationand
press Enter. Turn on Mail Notification.
PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU
78 

5. Enter the IP address for the
SMTP Serveroption.
Note: To enter the IP address using the numeric keys on the remote control, press and hold the
Num button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
6. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
7. Choose an AddressorEmail Address field, enter the e-mail address, and select the alerts you
want to receive there. Repeat for up to three addresses....

Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
1. Press theMenubutton.
2. Select the Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Do one of the following: • Select the Othersmenu and press Enter.
PowerLite Pro G6870/G6970WU
• Select the Administrator Setting menu...