Epson Projector PowerLite Pro G6570WU User Manual

Selecting Wireless Network Settings Manually
Selecting Wireless Network Settings in Windows
Selecting Wireless Network Settings in OS X
Enabling WPA or EAP Security
Parent topic:
Using the Projector on a Network
Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module. Do not
install any other type of wireless LAN module.
Caution:Never remove the module while its indicator light is green or flashing, or while you are
projecting...

3. Remove the screw securing the wireless LAN module stopper, then remove the stopper.
4. Insert the wireless LAN module into the port.
62   

5. Replace the wireless LAN module stopper and secure it using the screw you removed.
6. Close the air filter cover.
7. Plug in and turn on the projector.
Parent topic:
Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB key to quickly connect your computer to the projector
wirelessly (PowerLite Pro G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU). Then you can
project your...

You see a screen like this:
3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector.
4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
5. Remove the USB key.
6. Reinsert the wireless LAN module into the projector.
64  

7. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then
select Allow on the next screen.
8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yesto disable the firewall for this application.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN button on your remote...

3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Basicmenu and press Enter.
66 

6. Select the following basic options as necessary:
•Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
• Web Remote Password lets you enter a password up to 8 alphanumeric characters long for
accessing the projector over the web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room with it. The projector displays...

Wireless LAN Menu Settings
Parent topic:
Wireless Network Projection
Wireless LAN Menu Settings
Setting OptionsDescription
Wireless LAN Power OnTurns wireless LAN support on
and off
Off
Wi-Fi Protected Setup To Setup WizardSelectTo Setup Wizard to start
the WPS Connection Setup utility
Wireless LAN System 802.11b/gSets the type of wireless LAN
system the projector is
802.11b/g/n
connecting to
Connection Mode QuickSelects the type of wireless
connection:
Advanced
Quick: lets you quickly connect
to one...

Setting
OptionsDescription
SSID Up 32 alphanumeric characters Sets the SSID (network name) of
the wireless LAN system the
projector is connecting to
Search Access Point To Search ViewSearch for available wireless
network access points in
Advancedconnection mode
Channel 1chInQuick connection mode,
selects the frequency band
6ch
(channel) used by the wireless
11ch LAN
SSID Display OnSelects whether to display the
SSID on the network standby
Off
screen
DHCP OnTurns on DHCP if your network
assigns addresses...

2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name(SSID).
• If your projector is configured for Quick mode, select the projectors SSID.
3. Click Connect.
Parent topic: Wireless Network Projection
Selecting Wireless Network Settings in OS X Before connecting to the projector, select the correct wireless network in OS X.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of...