Epson Projector PowerLite Pro G6470WU User Manual

							Setting
OptionsDescription
Date & Time —Adjusts the projectors system
time and date settings
Parent topic: Adjusting the Menu Settings
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring
and control over a network.
191 
						

							Setting
OptionsDescription
Net. Info - Wireless LAN Connection mode Displays wireless network status
and details
(PowerLite Pro Antenna level
G6070W/G6170/G6270W/ Projector Name
G6470WU/G6570WU/G6770WU
SSID
)
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Net. Info - Wired LAN Projector NameDisplays wired network status
and details
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Network Configuration Accesses additional network Configures your network settings
menus
Parent topic: Adjusting the Menu Settings
Related concepts
Wired Network Projection
Wireless Network Projection
192 
						

							Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note:The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
193 
						

							Setting
OptionsDescription
Projector Info Lamp HoursDisplays the number of hours (H)
the lamp has been used in
Normal andECO Power
Consumption modes; if the
information is displayed in yellow,
obtain a genuine Epson
replacement lamp soon
Source Displays the name of the port to
which the current input source is
connected
Input Signal Displays the input signal setting
of the current input source
Resolution Displays the resolution of the
current input source
Video Signal Displays the video signal format
of the current input source
Refresh Rate Displays the refresh rate of the
current input source
Sync Info Displays information that may be
needed by a service technician
Status Displays information about
projector problems that may be
needed by a service technician
Serial Number Displays the projectors serial
number
HDBaseT Signal Quality Displays the image signal
information from the HDBaseT
port
Version MainDisplays the projectors firmware
information
Main2
Video
Event ID Code List
194 
						

							Parent topic:
Adjusting the Menu Settings
Related references
Optional Equipment and Replacement Parts
Projector Lamp Specifications
Event ID Code List If theEvent ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Event ID code Cause and solution
0432 The EasyMP Network Projection program did not start. Turn the projector off and
then on again.
0435
0434 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0433 Cannot display the transferred images. Restart the EasyMP Network Projection
program.
0484 Communication with computer was disconnected. Restart the EasyMP Network
Projection program.
04FE The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
04FF A projector system error has occurred. Turn the projector off and then on again.
0891 Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
0893 The WEP/TKIP/AES encryption type does not match. Make sure the wireless
network security settings are correct.
0894 Communication with unauthorized access point was disconnected. Contact your
network administrator.
195 
						

							Event ID code Cause and solution
0898
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCPsetting in the Network menus.
0899 Communication error. Restart the EasyMP Network Projection program.
089A The projectors EAP authentication type does not match the network. Check the
wireless LAN security settings and make sure that the security certificate is installed
correctly.
089B EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
089C EAP client authentication failed. Check the wireless LAN security settings and make
sure that the security certificate is installed correctly.
089D Key exchange failed.
Parent topic: Projector Information Display - Info Menu
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset Alloption on the
Reset menu.
196 
						

							You can also reset the projectors lamp usage timer to zero when you replace the lamp using the
Reset
Lamp Hours option, or reset the saved names and settings in the Save Memory list using the Reset
Memory option.
You cannot reset the following settings using the Reset Alloption:
• Input Signal
• Users Logo
• Language
• Network menu items
• Lamp Hours
• Password
• Multi-screen
• Date & Time
• Panel Alignment
• Color Uniformity
Parent topic: Adjusting the Menu Settings
197 
						

							Maintaining and Transporting the Projector
Follow the instructions in these sections to maintain your projector and transport it from place to place.
Projector Maintenance
Transporting the Projector
Projector Maintenance Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part
needs replacing, contact Epson or an authorized Epson servicer.
Warning:Before cleaning any part of the projector, turn it off and unplug the power cord. Never open
any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages
in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to qualified servicers.
Cleaning the Lens
Cleaning the Projector Case
Air Filter and Vent Maintenance
Projector Lamp Maintenance
Replacing the Remote Control Batteries
Parent topic: Maintaining and Transporting the Projector
Cleaning the Lens Clean the projectors lens periodically, or whenever you notice dust or smudges on the surface.
• To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
198 
						

							• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector lamp may cause a fire.
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.
Parent topic: Projector Maintenance
Cleaning the Projector Case Before cleaning the projector case, turn off the projector and unplug the power cord.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquiddirectly on the projector.
Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a residue.
Parent topic: Projector Maintenance
Air Filter and Vent Maintenance Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance
simple. Filter maintenance intervals will depend on the environment.
If regular maintenance is not performed, your Epson projector will notify you when the temperature
inside the projector has reached a high level. Do not wait until this warning appears to maintain your
projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector or lamp Limited Warranties.
Cleaning the Air Filter
Replacing the Air Filter
Parent topic:Projector Maintenance
199 
						

							Cleaning the Air Filter
You need to clean the projectors air filter in the following situations:
• The filter or vents get dusty.
• You see a message telling you to clean it.
• The projectors filter light flashes green.
1. Turn off the projector and unplug the power cord.
2. Slide the air filter cover latch and open the air filter cover.
200