Epson Projector PowerLite Pro G6450WU User Manual

							

Note:
Enabling CrestronRoomView disablestheEpson Message Broadcast featureinthe EasyMP
 Monitor
software.
 6.
When youfinish selecting settings,selectComplete orSetup Complete andfollow theon-screen
 instructions
tosave yoursettings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
 using
acompatible webbrowser.
 1.
Start yourwebbrowser onacomputer connected tothe network.
 2.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seethisscreen:
 3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 81  
						

							

4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed
screen,andclick Send .
 7.
When youfinish selecting settings,clickExittoexit theprogram.
 Parent
topic:Crestron RoomView Support
 82 
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Setting
theScreen Type
 Adjusting
theImage Position UsingScreen Position
 Adjusting
theImage Position UsingLensShift
 Displaying
aTest Pattern
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Setting
theDate andTime
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 Note:
Ifthe Startup SourceSearchsettinginthe Extended menuisenabled, theprojector
 automatically
detectstheinput signal whenyouturn iton.
 83 
						

							

1.
Connect thepower cordtothe projectors powerinlet.
 2.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 3.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about 30
 seconds,
thepower lightstops flashing andturns green.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren andpets.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media, andpress theplay button (ifnecessary).
 •
Press theSource Searchbuttononthe projector orthe Search buttononthe remote controltodetect
 the
video source.
 84  
						

							

Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 1.
Press thepower button onthe projector orthe Standby buttononthe remote control.
 2.
Ifyou seeashutdown confirmation screen,pressthepower button onthe projector orthe Standby
 button
onthe remote controlagain.(Toleave theprojector on,press anyother button.)
 The
projector beepstwice,thelamp turns off,and thepower lightturns orange.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen orflashing orange.
 Parent
topic:UsingBasicProjector Features
 85 
						

							

Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Setting
theScreen Type
 You
canusetheScreen Typesetting tomatch theaspect ratioofthe displayed imagetothe screen
 being
used.
 1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 86 
						

							

4.
Select Display >Screen >Screen Type.
 You
seethisscreen:
 5.
Select yourscreens aspectratioandpress Enter.
 6.
Press theMenu button toaccept thechanges.
 Note:
Afterchanging theScreen Typesetting, adjusttheaspect ratioforthe projected image.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Aspect Ratio
 Adjusting
theImage Position UsingScreen Position
 You
canadjust theimage position ifthere aremargins between theedge ofthe image andtheprojected
 screen
frame.
 1.
Turn onthe projector anddisplay animage.
 2.
Press theMenu button.
 3.
Select theExtended menuandpress Enter.
 4.
Select Display >Screen >Screen Position .
 87 
						

							

5.
Use thearrow buttons onthe remote controlorprojector toadjust theposition ofthe image.
 6.
When youarefinished, presstheMenu button.
 Note:
Thescreen position cannotbeadjusted ifthe Screen Typeisset to16:10 forthe PowerLite Pro
 G6050W,
G6450WU, G6550WU,orG6900WU modelsor4:3 forthe PowerLite ProG6150 andG6800
 models.

Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Position UsingLensShift
 If
the projector cannotbeinstalled directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected
imageusingthelens shiftfeature.
 Note:
Wait30minutes afterturning onthe projector beforesetting thefocus, zoom, andlens shiftfor
 maximum
accuracy.
 1.
Turn onthe projector anddisplay animage.
 88  
						

							

2.
Slide thelens shiftdiallock asshown torelease thelock.
 3.
Turn thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 The
range inwhich theimage canbemoved isshown asfollows:
 89   
						

							

1
 Center
oflens
 2
 Projected
imagewhenlensshiftisset inthe center
 3
 V
×67% (PowerLite ProG6050W/G6450WU/G6550WU/G6750WU/G6900WU); V× 57%
 (PowerLite
ProG6150/G6800)
 4
 H
×30%
 Note:
Theimage cannot bemoved toboth thehorizontal andvertical maximum values.
 4.
When youarefinished, slidethelens shiftdiallock asshown tolock thedials.
 90