Epson Projector PowerLite Pro Cinema LS9600e User Manual
Have a look at the manual Epson Projector PowerLite Pro Cinema LS9600e User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
To change settings for an input source, make sure the source is connected and select that source. Setting OptionsDescription 3D Setup 3D DisplaySelects various 3D options for 3D image sources 2D-to-3D Conversion 3D Display: enables 3D mode 3D Format 2D-to-3D Conversion: converts 3D Depth 2D images to 3D Diagonal Screen Size Note:When using 2D-to-3D Inverse 3D Glasses Conversion, set3D Formatto 3D Viewing Notice Autoor2D. 3D Format: selects the 3D format 3D Depth: sets the depth for the 3D image Diagonal Screen Size: selects the actual size of the screen to maximize the 3D effect Inverse 3D Glasses: reverses the images projected for the left and right eyes (enable only if 3D images do not display correctly) 3D Viewing Notice: enables the viewing notice displayed when using 3D mode Aspect See the list of available aspect Sets the aspect ratio (width-to- ratiosheight ratio) for the selected input source Tracking Varying levels available Adjusts signal to eliminate vertical stripes in computer images from the PC input port 101
Setting OptionsDescription Sync. Varying levels available Adjusts signal to eliminate fuzziness or flickering in computer images; for best results, adjust theTracking setting before adjusting the Sync setting to improve the accuracy of the adjustments. Position Up, down, left, rightAdjusts the image location on the screen Deinterlacing OffSets whether to convert interlaced-to-progressive signals Video for certain video image types Film/Auto Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation Motion Detection 1to 5 Selects how the image is converted to a progressive signal; if you experience problems with still image quality or flickering video, select a lower setting for still images or a higher setting for fast-moving video content.) Frame Interpolation OffSmooths fast moving video by comparing consecutive frames Low and inserting an intermediate Normal frame between them High Super-resolution (PowerLite0to 5 Sharpens blurred images Pro Cinema LS9600e) resulting from increasing resolution 102
Setting OptionsDescription Super-resolution/4K (PowerLiteOff Sharpens blurred images Pro Cinema LS10000) resulting from increasing 1 to 5 resolution 4K-1 to4K-5 Super-resolution (1to 5); reduces blurring when the image resolution is increased to 1920 × 1080 4K Enhancement ( 4K-1to4K-5); projects 4K images (3840 × 2160), employing super- resolution processing to create ultra-high-definition video images Cannot be set when a 4K or computer image is selected Detail Enhancement RangeEnhances details to create clear outlines; Strength Range: higher settings increase the affected area around the outline Strength: higher settings create a stronger effect Auto Setup OnAutomatically optimizes computer image quality Off 103
Setting OptionsDescription Advanced Noise ReductionNoise Reduction: reduces flickering in analog images in Setup Level three levels Overscan Setup Level: adjusts the level at HDMI Video Range which dark areas of the image are rendered black; leave this Image Processing setting at 0% for most video equipment; check your video equipment specifications to verify the correct setting Overscan: changes the projected image ratio to make the edges visible by a selectable percentage or automatically HDMI Video Range: sets the video range to match the setting of the device connected to the HDMI input port Image Processing: adjusts how images are processed; select Fastto display images quicker; select Fineto display images in higher quality Note: TheReset setting does not reset the Diagonal Screen Size,3D Viewing Notice,Aspect, and Image Processing settings. Parent topic: Adjusting the Menu Settings Related concepts Image Aspect Ratio Related tasks Changing the Super-resolution Setting Changing the Super-resolution/4K Enhancement Setting 104
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. Setting OptionsDescription Keystone Varying levels available Adjusts vertical image shape to rectangular 105
Setting OptionsDescription HDMI Link Device ConnectionsAdjusts the HDMI Link options that allow the projector remote to HDMI Link control HDMI-connected devices Power On Link that support the CEC standard Power Off Link Device Connections: lists the devices connected to theHDMI1 and HDMI2 ports HDMI Link: enables or disables the HDMI Link function Power On Link: controls what happens when you turn on the projector or a linked device • PJ -> Device orBidirectional: turns on the linked device when the projector is turned on • Device -> PJ orBidirectional: turns on the projector when the linked device is turned on Power Off Link: controls whether linked devices are turned off when the projector is turned off 106
Setting OptionsDescription WirelessHD Device ConnectionsDevice Connections: displays a list of available WirelessHD (PowerLite Pro Cinema WirelessHD devices LS9600e) Reception WirelessHD: controls whether WiHD Mode the projector receives WirelessHD signals Reception: displays the strength of the WirelessHD signal WiHD Mode: adjusts the WirelessHD signal strength and range •Full: uses the maximum video bandwidth at all times • Dynamic: provides extended signal range while adjusting the video bandwidth in real time; if your WirelessHD signal is weak, try changing the WiHD Mode to Dynamic Lock Setting Lens LockControls projector button locking to secure the projector Child Lock Lens Lock: locks the focus, Control Panel Lock zoom, and lens shift settings Child Lock: locks the power button Control Panel Lock: locks all buttons except the power button Projection FrontSelects the way the projector faces the screen so the image is Front/Ceiling oriented correctly Rear Rear/Ceiling 107
Setting OptionsDescription User Button 2D-to-3D ConversionAssigns a menu option to the Userbutton on the remote (PowerLite Pro Cinema 3D Depth control for one-touch access LS10000) Inverse 3D Glasses Power Consumption Detail Enhancement Info Picture in Picture See the list of available Picture in Adjusts the size and location of Picture optionsthe sub-screen, swaps sources and exits Picture in Picture mode 108
Setting OptionsDescription Operation Direct Power OnSelects various operation options Sleep Mode Direct Power On: lets you turn on the projector without pressing Illumination the power button Trigger Out Sleep Mode: automatically High Altitude Mode places the projector in standby mode after an interval of inactivity Lens Adjustment Mode Illumination: turns off the lights on the projector Trigger Out: outputs a DC 12V signal from the 3.5 mm mini-jack Trigger Out 1andTrigger Out 2 ports whenever the projector is turned on; the Anamorphic Wide option outputs voltage to both Trigger Out ports when Aspect is set to Anamorphic Wide orHoriz. Squeeze High Altitude Mode: regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) Lens Adjustment Mode: adjusts the amount of lens movement for the focus, zoom, and lens shift adjustments when pressing the arrow buttons; lower numbers reduce the amount of movement, and higher numbers increase the amount of movement per button press 109
Setting OptionsDescription Display Menu PositionSelects various display options Menu Color Menu Position: adjusts the location where the menu is Messages displayed Display Background Menu Color: selects the color of Startup Screen the menu Standby Confirmation Messages: controls whether messages are displayed on the screen Display Background: selects the screen color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up Standby Confirmation: displays a confirmation message after pressing theStandbybutton on the remote control Input Signal Video SignalSelects the input signals for certain ports Component Video Signal: specifies the signal type from input sources connected to theVideoport or select Autoto detect the signal automatically Component: specifies the signal type from input sources connected to the Component port or select Autoto detect the signal automatically 110