Epson Projector PowerLite 97H User Manual

							3. Attach the wireless LAN module cover and secure it using the screw you removed.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Parent topic:
Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB key to quickly connect your computer to the projector
wirelessly. Then you can project your presentation and remove the key when you are done.
Note:The Quick Wireless Connection USB key is not included with your projector and is optional.
Note: Make sure the wireless LAN module is installed. The wireless LAN module is not included with
your projector and is optional.
1. Turn on the projector.
2. Press the LANbutton on the remote control.
51  
						

							You see a screen like this:
3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector.
4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
5. Remove the USB key.
6. Reinsert the wireless LAN module into the projector.
52  
						

							7. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then
select Allow on the next screen.
8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yesto disable the firewall for this application.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN button on your remote control or restart your computer.
9. Run your presentation as necessary.
10. When you finish projecting wirelessly, select the Safely Remove Hardwareoption in the Windows
taskbar, then remove the USB key from your computer.
Note: You may need to restart your computer to reactivate your wireless LAN connection.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector
using its menu system.
1. Turn on the projector.
2. Press theMenubutton.
53 
						

							3. Select the
Networkmenu and press Enter.
4. Select Network Configuration and pressEnter.
5. Select the Basicmenu and press Enter.
6. Select the following basic options as necessary: •Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
54 
						

							•
PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the
PJLink protocol for projector control.
• Web Control Password lets you enter a password up to 8 alphanumeric characters long for
accessing the projector over the web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room with it. The projector displays a random keyword that you must enter from
a computer using the EasyMP Network Projection software or an iOS or Android device using
iProjection.
• Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow
buttons on the remote control to highlight characters and press Enterto select them.
7. Select the Wireless LAN menu and press Enter.
8. Select the settings on the Wireless LANmenu as necessary for your network.
9. When you finish selecting settings, select Completeand follow the on-screen instructions to save
your settings and exit the menus.
55 
						

							After you complete the wireless settings for your projector, you need to select the wireless network on
your computer.
Wireless LAN Menu Settings
Parent topic:
Wireless Network Projection
Wireless LAN Menu Settings
Setting OptionsDescription
Connection Mode QuickSelects the type of wireless
connection:
Advanced
Quick: lets you quickly connect
to one computer or use the
optional Quick Wireless
Connection USB key to connect
Advanced: lets you connect to
multiple computers via a wireless
network access point
Channel 1chInQuick connection mode,
selects the frequency band
6ch
(channel) used by the wireless
11ch LAN
SSID Auto Setting OnTurns on automatic SSID
searching inQuickconnection
Off
mode; set toOffwhen
connecting to multiple projectors
at the same time ; set to On
when connecting in Quick
connection mode with an Android
device using iProjection
SSID Up 32 alphanumeric characters Sets the SSID (network name) of
the wireless LAN system the
projector is connecting to
Search Access Point —Search for available wireless
network access points in
Advancedconnection mode
56 
						

							Setting
OptionsDescription
IP Settings DHCPInAdvanced connection mode,
select DHCP if your network
IP Address
assigns addresses automatically,
Subnet Mask or manually enter the networks
IP Address,Subnet Mask, and
Gateway Address
Gateway Address
SSID Display OnSelects whether to display the
SSID on the network standby
Off
screen
IP Address Display OnSelects whether to display the IP
address on the network standby
Off
screen
Parent topic: Selecting Wireless Network Settings Manually
Searching for a Wireless Network You can use your projectors site survey function to quickly locate and connect to available wireless
networks.
1. Turn on the projector.
2. Press theMenubutton.
3. Select the Networkmenu and press Enter.
57 
						

							4. Select
Network Configuration and pressEnter.
5. Select the Wireless LAN menu and press Enter.
6. Select Advanced as the Connection Mode setting and press Enter.
7. Select Search Access Point and pressEnter.
8. Select the name of the wireless network you want to connect to and press Enter.
9. If the network has security enabled, enter the wireless password.
58 
						

							You see a screen like this:
10. Select the settings on the security menu as necessary for your network.
11. When you finish selecting settings, select Completeand follow the on-screen instructions to save
your settings and exit the menus.
Parent topic: Wireless Network Projection
Using a QR Code to Connect a Mobile Device After you select the wireless network settings for your projector, you can display a QR code on the
screen and use it to connect a mobile device using the Epson iProjection app.
Note:Make sure you have installed the latest version of Epson iProjection on your device. Visit
epson.com/projectorapp (U.S.) orepson.ca/projectorapp (Canada) for more information.
1. Press the Menubutton.
59 
						

							2. Select the
Networkmenu and press Enter.
3. Select Network Configuration and pressEnter.
4. Select the Basicmenu and press Enter.
5. Set the Display LAN Info setting toText & QR Code.
6. Select Completeand follow the on-screen instructions to save your settings and exit the menus.
60