Epson Projector PowerLite 5025UB User Manual

4.
Slide thelamp cover outand liftitoff.
 5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 91   

6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 7.
Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright
 way.
Press thehandle downuntilitlocks intoplace.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 92    

8.
Push inthe lamp firmly andtighten thescrews tosecure it.
 Caution:
Donot over-tighten thescrews.
 9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 93   

Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage
 information.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt askingifyou want toreset thelamp hours.
 5....

Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types,
 or
mix new andoldbatteries.
 1.
Remove thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid...

3.
Insert thebatteries withthe+and –ends facing asshown.
 4.
Replace thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlSpecifications
 96   

Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport,
 ship,
orstore theprojector safely:
 •
Remove anyequipment connectedtothe projector.
 •
Center thelens position usingthevertical andhorizontal lensshiftdials.
 •
When transporting theprojector along distance oras checked luggage, packitin afirm boxwith
 cushioning
arounditand mark thebox Fragile.
 •
When shipping theprojector forrepairs, placeitin its original packing materials,...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Solving
ImageProblems
 Solving
Projector orRemote ControlOperation Problems
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem, checkthefollowing:
 •
The lights onthe projector mayindicate whattheproblem is.
 •
The solutions...

Projector
LightStatus
 The
lights onthe projector indicatetheprojector statusandletyou know when aproblem occurs.Check
 the
status andcolor ofthe lights andlook forasolution inthe table here.
 1
 Status
light
 2
 Lamp
light
 3
 Temp
light
 4
 Power
light
 Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Blue
 Off
 Off
 Normal
operation
 99  

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Flashing
blue
 Off
 Off
 Warming
up;wait foranimage to
 appear

Off
 Off
 Off
 Off
 Standby
orsleep mode
 Blue
 Flashing
blue
 Off
 Off
 Shutting
down;whentheStatus light
 stops
flashing, youcanunplug the
 projector

Flashing
blue
 Varies
 Off
 Flashing
 Projector
istoo hot
 orange

•
Make surethatthevents andair
 filter
arenotclogged withdust or
 obstructed
bynearby objects
 •
Clean orreplace theairfilter
 •
Make...