Epson Projector PowerLite 5025UB User Manual

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Off
 Flashing
blue
 Orange
 Off
 Lamp
hasaproblem
 •
Check theLamp Hours inthe Info
 menu
tosee ifthe lamp isburned
 out.
Wait forthe lamp tocool down,
 and
then remove itto see ifitis
 broken
orinstalled incorrectly;
 reseat
orreplace thelamp as
 necessary

•
Clean orreplace theairfilter
 •
Ifoperating theprojector athigh
 altitude,
turnonHigh Altitude
 Mode

•
Ifthe problem persists, unplugthe
 projector
andcontact Epsonfor
 help...

Related
references
 Projector
SetupSettings -Extended Menu
 Related
tasks
 Cleaning
theAirFilter
 Replacing
theLamp
 Replacing
theAirFilter
 Solving
ImageProblems
 Check
thesolutions inthese sections ifyou have anyproblems withprojected images.
 Solutions
WhenNoImage Appears
 Solutions
WhenNo Signal Message Appears
 Solutions
WhenNot Supported Message Appears
 Solutions
WhenOnlyaPartial ImageAppears
 Solutions
WhentheImage isNot Rectangular
 Solutions
WhentheImage Contains NoiseorStatic
 Solutions...

•
For images projected withWindows MediaCenter, reducethescreen sizefrom fullscreen mode.
 •
For images projected fromapplications usingWindows DirectX,turnoffDirectX functions.
 Parent
topic:Solving ImageProblems
 Related
references
 Image
Quality Settings -Image Menu
 Projector
SetupSettings -Extended Menu
 Solutions
WhenNo Signal Message Appears
 If
the No Signal message appears,trythe following solutions:
 •
Press thesource buttononthe projector repeatedly tocycle through theavailable...

4.
Ifnecessary, checkyourvideo cardsettings andsetthe multiple displayoptiontoMirror or
 Duplicate
.
 Parent
topic:Solutions WhenNo Signal Message Appears
 Displaying
FromaMac Laptop
 If
you seetheNo Signal message whenyoudisplay fromaMac laptop, youneed toset upthe laptop
 for
mirrored display.(Seeyourlaptop manual fordetails.)
 1.
Open theSystem Preferences utilityandselect Displays .
 2.
Click theArrangement tab.
 3.
Select theMirror Displays checkbox.
 Parent
topic:Solutions WhenNo Signal Message...

Parent
topic:Solving ImageProblems
 Related
references
 Input
Signal Settings -Signal Menu
 Supported
VideoDisplay Formats
 Solutions
WhentheImage isNot Rectangular
 If
the projected imageisnot evenly rectangular, trythe following solutions:
 •
Place theprojector directlyinfront ofthe center ofthe screen, facingitsquarely, ifpossible.
 •
Ifyou adjusted theprojector heightusingtheprojector feet,press thekeystone buttonsonthe
 projector
toadjust theimage shape.
 •
Adjust theimage shape usingtheKeystone...

•
Ifyou connected anextension powercable,tryprojecting withoutitto see ifitcaused interference in
 the
signal.
 Parent
topic:Solving ImageProblems
 Related
references
 Input
Signal Settings -Signal Menu
 Image
Quality Settings -Image Menu
 Supported
VideoDisplay Formats
 Solutions
WhentheImage isFuzzy orBlurry
 If
the projected imageisfuzzy orblurry, trythe following solutions:
 •
Adjust theimage focus.
 •
Clean theprojector lens.
 •
Position theprojector closeenough tothe screen, anddirectly infront...

•
Check yourvideo source settings.
 •
Adjust theavailable settingsonthe Image menuforthe current inputsource, suchasBrightness ,
 Contrast
,Tint ,Advanced ,and Color Saturation .
 •
Make sureyouselected thecorrect PCSignal orVideo Signal settingonthe Extended menu,if
 available
foryour image source.
 •
Make sureallthe cables aresecurely connected tothe projector andyour video device. Ifyou
 connected
longcables, tryconnecting shortercables.
 •
Ifyou areusing theECO Power Consumption...

•
Make sureyourscreen sizematches theDiagonal ScreenSizesetting onthe Signal menu.
 •
Avoid usingtheprojector nearwireless networks, microwave ovens,2.4GHz cordless phones,or
 other
devices thatusethe2.4GHz frequency band.These devices caninterfere withthesignal
 between
theprojector andthe3Dglasses.
 •
Ifthe other solutions donot notsolve theproblem, changetheInverse 3DGlasses settingonthe
 Signal
menu.Return thesetting toits original valueifchanging itdoes notsolve theproblem.
 Parent
topic:Solving...

•
Ifthe projectors lampshuts off,the Status lightisflashing blue,andtheTemp lightisorange, the
 projector
hasoverheated andshut off.Check thesolutions forthis light status.
 •
Ifthe power button onthe remote controldoesnotturn onthe projector, checkitsbatteries andmake
 sure
theRemote Receiver settingisturned oninthe projectors menu,ifavailable.
 Parent
topic:Solving Projector orRemote ControlOperation Problems
 Related
references
 Where
toGet Help
 Projector
LightStatus
 Projector
FeatureSettings...

Remote
ControlOperation
 Projector
FeatureSettings -Settings Menu
 Related
tasks
 Replacing
theRemote ControlBatteries
 Where
toGet Help
 If
you need tocontact Epsonfortechnical supportservices, usethefollowing supportoptions.
 Internet
Support
 Visit
Epsons supportwebsite atepson.com/support (U.S.)orepson.ca/support (Canada)forsolutions to
 common
problems withyour projector. Youcandownload utilitiesanddocumentation, getFAQs and
 troubleshooting
advice,ore-mail Epson withyour questions.
 Speak...