Epson Projector PowerLite 5025UB User Manual

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2.
Ifthe image istilted, rotate thefront feettoadjust...

If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Adjusting
theImage Position UsingLensShift
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Adjusting
theImage Position UsingLensShift
 If
you cannot installtheprojector directlyinfront ofthe screen, youcanadjust theposition ofthe
 projected
imageusingthelens shiftfeature.
 Note:
Wait30minutes afterturning onthe projector beforesetting thefocus, zoom, andlens shiftfor
 maximum
accuracy.
 1.
Turn...

2.
Turn thevertical andhorizontal lensshiftdials onthe projector toadjust theposition ofthe projected
 image
asnecessary.
 Note:
Youcannot movetheimage toboth thehorizontal andvertical maximum values.
 1
 Horizontal
width×47%
 2
 Vertical
height×96%
 Follow
theseguidelines whenusinglensshifttoadjust yourimages:
 •
When adjusting theimage height, position theimage lowerthanwhere youwant itto be and then
 move
itup using thevertical lensshiftdial. This willhelp prevent theimage frommoving downafter...

Parent
topic:Adjusting theImage Height
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place theprojector atan angle tothe screen, ortilted upordown, oroff
 to
the side, youmay need tocorrect theimage shape forthe best display quality.
 Correcting
ImageShape withtheKeystone Buttons
 Parent
topic:UsingBasicProjector Features
 Correcting
ImageShape withtheKeystone Buttons
 You
canusetheprojectors...

3.
Press akeystone buttononthe projectors controlpaneltoadjust theimage shape.
 After
correction, yourimage isslightly smaller.
 Note:
Ifthe projector isinstalled outofreach, youcanalso correct theimage shape withtheremote
 control
usingtheKeystone settingsinthe projector menus.
 Parent
topic:Image Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Resizing
theImage withtheZoom Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before...

2.
Toenlarge orreduce theimage size,rotate theprojectors zoomring.
 Parent
topic:UsingBasicProjector Features
 Focusing
theImage UsingtheFocus Ring
 1.
Turn onthe projector anddisplay animage. Wait30minutes afterturning onthe projector before
 setting
thefocus, zoom, andlens shiftformaximum accuracy.
 Note:
Youcandisplay apattern toaid inadjusting theprojected imageusingthePattern buttonon
 the
remote control.
 2.
Tosharpen theimage focus,rotatetheprojector ’s focus ring.
 46   

Parent
topic:UsingBasicProjector Features
 Adjusting
theColor Convergence (PanelAlignment)
 You
canusethePanel Alignment featuretomanually adjustthecolor convergence (thealignment ofthe
 red,
green andblue colors) inthe projected image.
 Note:
Allowyourprojector towarm upfor atleast 10to15 minutes andmake suretheimage isin focus
 before
youusethePanel Alignment feature.Theprojected imageshould beaminimum of60 inches
 (152
cm)diagonally andtheprojection surfaceshouldnotbecolored ortextured, otherwise...

•
Bto adjust theblue color convergence.
 Note:
Youcanonly adjust thered orblue color convergence. Greenisthe standard colorpanel and
 cannot
beadjusted.
 8.
Select thePattern Colorsetting andpress Enter.
 9.
Select thepattern youwant touse and press Enter.
 10.
Select StartAdjustments andpress Enter.
 You
seethisscreen:
 11.
Use thearrow buttons onthe remote controltoadjust thecolor alignment inthe corner ofthe screen
 highlighted
bythe orange box.
 12.
Press theEnter button tomove tothe next corner...

You
seethisscreen:
 14.
Doone ofthe following:
 •
Ifyour projectors panelalignment isnow correct, selectExitandpress Enter toreturn tothe
 Panel
Alignment menu.
 •
Ifyour projector needsadditional panelalignment, selectSelect intersection andadjust and
 press
Enter.Use thearrow keysonthe remote controltohighlight thecorner ofany boxonthe
 screen
thatismisaligned andpress Enter toadjust thecolor convergence. Repeatthisstep as
 necessary.

Parent
topic:UsingBasicProjector Features
 Remote...

Make
surethatyouaimtheremote controlatthe projectors receiverswithinthedistance andangles
 listed
here.
 1
 32
feet (10m)
 2
 ±
30 °
 3
 60
°
 4
 10
°
 Note:
Avoidusingtheremote controlinconditions withbright fluorescent lightsorindirect sunlight, or
 the
projector maynotrespond tocommands. Ifyou willnot use theremote controlforalong time,
 remove
thebatteries.
 Parent
topic:UsingBasicProjector Features
 Selecting
anImage Source
 If
you connected multipleimagesources tothe projector, suchasacomputer...