Epson Projector Powerlite 1915 User Manual

							

2.
Connect theother endofthe cable tothe projectors LANport.
 Parent
topic:WiredNetwork Projection
 Selecting
WiredNetwork Settings
 Before
youcanproject frommultiple computers onyour network, youmust select thenetwork settings
 for
the projector usingitsmenu system.
 Note:
Makesureyoualready connected theprojector toyour wired network usingtheLAN port.
 1.
Turn onthe projector.
 2.
Press theMenu button onthe remote control.
 3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration .
 51  
						

							

5.
Select theBasic menuandpress Enter.
 PowerLite
1830
 PowerLite
1915/1925W
 52 
						

							

6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP Network Projection softwaretoaccess theprojector.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 7.
Select theWired LANmenu andpress Enter.
 8.
Ifnecessary, selectIPSettings .
 PowerLite
1830
 53 
						

							

PowerLite
1915/1925W
 9.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 10.
Toprevent displayofthe IPaddress onthe standby screen,turnoffIPAddress Display.
 Parent
topic:WiredNetwork Projection
 Wireless
NetworkProjection
 You
cansend images toyour PowerLite 1915/1925W projectorthroughawireless network. Todothis,
 you
must install theEpson 802.11g/b/a wirelessLANmodule, andthen setupyour projector and
 computer
forwireless projection.
 There
aretwo ways toconnect theprojector toyour wireless network:
 •
Using theoptional EpsonQuickWireless USBConnection key.
 •
Configuring theconnection manuallyusingtheprojectors Networkmenus.
 54 
						

							

After
installing themodule andsetting upthe projector, installthenetwork software fromtheEpson
 Projector
SoftwareforMeeting &Presentation CD-ROMonyour computer. Usethefollowing software
 and
documentation toset up, control, andmonitor wireless projection:
 •
EasyMP Network Projection softwaresetsupyour computer forwireless networkprojection. Seethe
 Network
andPCFree Operation Guideinstalled fromyourprojector CD-ROM forinstructions.
 •
Easy Management ®
EasyMP Monitorsoftware (Windows only)letsyou monitor andcontrol your
 projector
throughthenetwork. SeetheEasyMP MonitorOperation Guideinstalled fromyourprojector
 CD-ROM
forinstructions.
 Installing
theWireless LANModule
 Using
QuickWireless Connection (WindowsOnly)
 Selecting
WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinWindows
 Selecting
WirelessNetworkSettingsinMac OS
 Setting
UpWireless NetworkSecurity
 Parent
topic:UsingtheProjector onaNetwork
 Installing
theWireless LANModule
 To
use thePowerLite 1915/1925W overawireless network, installtheEpson 802.11g/b/a wireless
 module
inthe projector. Donot install anyother typeofwireless module.
 CAUTION:
Neverremove themodule whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 1.
Remove thewireless LANmodule cover.
 55  
						

							

2.
Insert thewireless LANmodule intotheport.
 3.
Replace thecover.
 56   
						

							

4.
Turn theprojector overandsecure thecover usingthescrew thatcame withtheLAN module.
 Parent
topic:Wireless NetworkProjection
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheoptional EpsonQuickWireless Connection USBkeytoquickly connect theprojector to
 a
Windows computer wirelessly. Thenyoucanproject yourpresentation andremove thekey when you
 are
done.
 1.
Turn onthe projector.
 2.
Connect theUSB keytothe projectors TypeAUSB port(use USB1 onthe PowerLite 1915/1925W).
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 3.
Remove theUSB key.
 4.
Now connect theUSB keytoaUSB portonyour computer ornotebook.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchU3.exe ,then select
 Allow
onthe next screen.
 57 
						

							

5.
Follow theon-screen instructions toinstall theQuick Wireless Connection driver.
 Note:
Ifyou seeaWindows Firewallmessage, clickYestodisable thefirewall.
 After
afew minutes, yourcomputer imageisdisplayed bythe projector. Ifitdoes notappear, restart
 your
computer.
 6.
Run your presentation asnecessary.
 7.
When youfinish projecting wirelessly, removetheUSB keyfrom yourcomputer.
 Note:
Youmay need torestart yourcomputer toreactivate yourwireless interface.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsManually
 Before
youcanproject fromyourwireless network, youmust select thenetwork settingsforthe projector
 using
itsmenu system.
 1.
Turn onthe projector.
 2.
Press theMenu button onthe remote control.
 3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration .
 58 
						

							

5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP Network Projection softwaretoaccess theprojector.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 59 
						

							

7.
Select theWireless LANmenu andpress Enter.
 8.
Select oneofthe following connection modes:
 •
Quick modeletsyou easily connect onecomputer tothe projector atatime. Youcanalso select
 this
setting whenyoure usingtheoptional EpsonQuickWireless Connection USBkey.
 •
Advanced modeletsmultiple computers accesstheprojector atthe same timeandeasily trade
 off
control ofthe projector. Thismethod requires awireless networkaccesspointoran AirPort
 Extreme
(orAirPort) basestation.
 Note:
Thewireless networkcardoraccess pointmustcomply withthe802.11g, 802.11b,or802.11a
 standard.

9.
Click ToSetup Wizard ifyour access pointiscompatible withWi-Fi Protected Setup(WPS), and
 you
want touse thePush Button orPIN Code method toconfigure theprojector.
 10.
Enter theSSID (network name)foryour existing wireless network.
 11.
Select yourIPsettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 12.
Toprevent displayofthe SSID onthe network standby screen,turnoffSSID Display .
 60