Epson Projector Powerlite 1850w User Manual

Setting
aPassword
 To
use password security,youmust setapassword.
 1.
Hold down theFreeze buttononthe remote controluntilyouseethePassword Protectmenu.This
 takes
about fiveseconds.
 2.
Press thedown arrow toselect Password andpress Enter.
 You
seetheprompt Change thepassword?.
 3.
Select Yesandpress Enter.
 4.
Hold down theNum button onthe remote controlandusethenumeric buttonstoset afour-digit
 password.

The
password displaysas**** asyou enter it.Then youseetheconfirmation prompt.
 5.
Enter...

If
you donot see thismenu, holddown theFreeze buttononthe remote controlforfive seconds untilthe
 menu
appears.
 1.
Toprevent unauthorized useofthe projector, selectPower OnProtect ,press Enter,select On,
 press
Enter again, andpress Esc.
 2.
Toprevent changes tothe Users Logoscreen orrelated display settings, selectUsers Logo
 Protect
,press Enter,select On,press Enter again, andpress Esc.
 3.
Toprevent changes tonetwork settings, selectNetwork Protect,press Enter,select On,press
 Enter
again,...

You
must enter thecorrect password touse theprojector.
 1.
Hold down theNum button onthe remote controlwhileyouenter thepassword usingthenumeric
 buttons.

The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifthe password isincorrect threetimes, youseeamessage thattheprojector islocked anda
 request
code.Writedown thecode, turntheprojector off,and disconnect thepower...

displayed
requestcodeandyour proof ofpurchase information toobtain acode tounlock the
 projector.)

•
Ifthe password isincorrect 30times inarow, theprojector remainslocked.Youmust send the
 projector
toEpson forservice.
 Parent
topic:Password SecurityTypes
 Saving
aUser s Logo Image toDisplay
 You
cantransfer animage tothe projector andthen display itwhenever theprojector turnson.You can
 also
display theimage whentheprojector isnot receiving aninput signal orwhen youtemporarily stop
 projection...

You
seeaprompt askingifyou want toselect thisimage area.
 6.
Select Yesandpress Enter.(If you want tochange theselected area,select No,press Enter,and
 repeat
thelast step.)
 You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished....

Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthepower button.
 1.
Press theMenu button.
 2.
Select theSettings menuandpress Enter.
 3.
Select theControl PanelLocksetting andpress Enter.
 4.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthepower button, selectPartial Lock.
 You...

Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe back ofthe projector toattach aKensington MicrosaverSecuritysystem,
 available
fromEpson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Creating
aUser Pattern toDisplay
 You
cantransfer animage tothe projector...

2.
Press theMenu button, selecttheSettings menu,andpress Enter.
 3.
Select thePattern settingandpress Enter.
 4.
Select theUser Pattern settingandpress Enter.
 You
seeaprompt askingifyou want touse thedisplayed imageasaUser Pattern.
 5.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 6.
Press Esctoexit themessage screen.
 Parent
topic:Adjusting...

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust...

5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values, selectReset.
 7.
When youfinish changing settingsonamenu, pressEsc.
 8.
Press Menu orEsc toexit themenus.
 Parent
topic:Adjusting theMenu Settings
 Image
Quality Settings -Image Menu
 Settings
onthe Image menuletyou adjust thequality ofyour image forthe input source youarecurrently
 using.
Theavailable settingsdependonthe currently selectedinputsource.
 To
change...