Epson Projector Powerlite 1850w User Manual

4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •...

7.
Select theWired LANmenu andpress Enter.
 8.
Ifnecessary, selectIPSettings andpress Enter.
 9.
Select yourIPSettings asnecessary:
 •
Ifyour network assignsaddresses automatically, turnonthe DHCP setting.
 •
Ifyou must setaddresses manually,turnoffDHCP andenter theprojectors IPAddress ,Subnet
 Mask
,and Gateway Addressasneeded.
 Note:
Tohighlight thenumbers youwant fromthedisplayed keyboard, pressthearrow buttons on
 the
remote control. Toselect ahighlighted number,pressEnter.
 10.
Toprevent...

1.
Turn onthe projector.
 2.
Connect theUSB keytothe projectors USBTypeA port.
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 3.
Remove theUSB key.
 4.
Now connect theUSB keytoaUSB portonyour computer ornotebook.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchU3.exe ,then select
 Allow
onthe next screen.
 5.
Follow theon-screen instructions toinstall theQuick Wireless Connection driver.
 Note:
Ifyou seeaWindows Firewallmessage, clickYestodisable thefirewall....

4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 7.
Select anumber forthe SMTP server PortNumber ,from 1to 65535 (default is25).
 8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:
Youre-mail address canbeupto32 alphanumeric...

Network
Projector E-mailAlertMessages
 When
aproblem occurswithanetworked projector,andyouselected toreceive e-mailalerts,you
 receive
ane-mail containing thefollowing information:
 •
EPSON Projector onthe subject line
 •
The name ofthe projector experiencing aproblem
 •
The IPaddress ofthe affected projector
 •
Detailed information abouttheproblem
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Parent
topic:Setting UpProjector NetworkE-MailAlerts
 Setting...

4.
Select theOthers menuandpress Enter.
 5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 6.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 7.
Ifyour network environment usesaCrestron RoomView controller,turnonthe RoomView settingto
 allow
theprojector tobe detected....

2.
Start yourwebbrowser onacomputer connected tothe network.
 3.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seetheWeb Control screen.
 4.
Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen instructions
 to
select settings.
 5.
Tocontrol theprojection remotely,selecttheWeb Remote option.
 You
seethisscreen:
 1
 Power
buttoncontrol
 2
 Selects
Computer portsource
 3
 Selects
Video,S-Video ,and HDMI portsources
 4
 Freeze...

10
 Volume
buttoncontrols
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
 Monitor
whenyouuseCrestron RoomView....

4.
Select theOthers menuandpress Enter.
 5.
SettheRoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable theRoomView setting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection...

4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theConfiguration menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed...