Epson Projector Powerlite 1850w User Manual

Information
item
 Description

Lamp
Hours
 Displays
thenumber ofhours (H )the lamp hasbeen usedin
 Normal
andECO Power Consumption modes;ifthe information is
 displayed
inyellow, obtainagenuine Epsonreplacement lamp
 soon

Source
 Displays
thename ofthe port towhich thecurrent inputsource is
 connected

Input
Signal
 Displays
theinput signal setting ofthe current inputsource
 Resolution
 Displays
theresolution ofthe current inputsource
 Video
Signal
 Displays
thevideo signal format ofthe current...

Event
IDcode
 Cause
andsolution
 0434
 Unstable
networkcommunication. Checkthenetwork communication status,waita
 few
moments, andtryconnecting tothe network again.
 0482

0484

0485

0433
 Cannot
displaythetransferred images.RestarttheEasyMP NetworkProjection
 program.

0481
 Communication
withcomputer wasdisconnected. RestarttheEasyMP Network
 Projection
program.
 0483
 The
EasyMP NetworkProjection programquitunexpectedly. Checkthenetwork
 communication
status,thenturntheprojector offand then...

You
cannot resetthefollowing settingsusingtheReset Alloption:
 •
Input Signal
 •
Users Logo
 •
Language
 •
Network menuitems
 •
Lamp Hours
 •
Password
 •
User Button
 Parent
topic:Adjusting theMenu Settings
 103 

Maintaining
andTransporting theProjector
 Follow
theinstructions inthese sections tomaintain yourprojector andtransport itfrom place toplace.
 Projector
Maintenance
 Transporting
theProjector
 Projector
Maintenance
 Your
projector needslittlemaintenance tokeep working atits best.
 You
may need toclean thelens periodically, andclean theairfilter andairvents toprevent theprojector
 from
overheating duetoblocked ventilation.
 The
only parts youshould replace arethelamp, airfilter, andremote...

•
To remove stubborn smudges, moistenasoft, lint-free clothwithlens cleaner andgently wipethe
 lens.
Donot spray anyliquid directly onthe lens.
 Warning:
Donot use alens cleaner thatcontains flammable gas.Thehigh heat generated bythe
 projector
lampmaycause afire.
 Caution:
Donot use glass cleaner toclean thelens, oryou may damage it.Do not use canned air,or
 the
gases mayleave aresidue. Avoidtouching thelens withyour bare hands toprevent fingerprints on
 or
damage tothe lens surface.
 Parent...

2.
Gently remove thedust using asmall vacuum designed forcomputers oravery softbrush (suchas
 a
paintbrush).
 Note:
Youcanremove theairfilter soyou canclean bothsides ofit.Do not rinse theairfilter in
 water,
oruse anydetergent orsolvent toclean it.
 Caution:
Donot use canned air,orthe gases mayleave aresidue.
 3.
Ifdust isdifficult toremove orthe airfilter isdamaged, replacetheairfilter.
 Parent
topic:AirFilter andVent Maintenance
 Replacing
theAirFilter
 You
need toreplace theairfilter inthe...

2.
Slide theairfilter cover latchandopen theairfilter cover.
 3.
Pull theairfilter outofthe projector.
 Note:
Airfilters contain ABSresin andpolyurethane foam.Dispose ofused airfilters according to
 local
regulations.
 107   

4.
Place thenew airfilter inthe projector asshown andpush gently untilitclicks intoplace.
 5.
Close theairfilter cover.
 Parent
topic:AirFilter andVent Maintenance
 Projector
LampMaintenance
 The
projector keepstrackofthe number ofhours thelamp isused anddisplays thisinformation inthe
 projectors
menusystem.
 Replace
thelamp assoon aspossible whenthefollowing occurs:
 •
The projected imagegetsdarker orstarts todeteriorate
 •
Amessage appearswhenyouturn onthe projector tellingyoutoreplace thelamp
 •
The...

Replacing
theLamp
 Before
youreplace thelamp, letthe projector cooldown foratleast onehour.
 Warning:
Letthelamp fullycool before replacing itto avoid injury.
 You
canreplace thelamp while theprojector ismounted tothe ceiling, ifnecessary.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Allow theprojector lamptocool down foratleast onehour.
 3.
Use thescrewdriver includedwiththereplacement lamptoloosen thescrew securing thelamp
 cover.

Warning:
Ifthe lamp isbroken, glassfragments maybeloose...

4.
Slide thelamp cover outand liftitoff.
 5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 110