Epson Projector Powerlite 1825 User Manual

Fine-Tuning the Projector151
Multi-screen Color Adjustment
You can match the color of projected images when two or more 
projectors are being used to display images near each other, or when 
you use the multi-screen feature to project from one source (one 
image) as described on page 98. For each screen, you can set five levels 
of brightness and color correction.
1. Before starting, you may want to assign a numeric ID to each 
projector. This lets you use the remote control to select the 
projector you...

152Fine-Tuning the Projector 

153
7
Managing Projectors
The software included with your projector lets you monitor and 
control your projectors from a remote computer:
■Use EMP Monitor (available for Windows only) to see your 
projectors’ status, switch image sources, and control basic settings.
■Use the mail notification function to receive e-mail alerts about 
possible problems. 
You can also use NS Connection to register up to 16 projectors as a 
group. This allows you to provide quick and easy access to these 
projectors from...

154Managing Projectors
Connecting to a Wired Network
Follow these steps to connect the projector to your network and 
configure it with an IP address: 
1. Connect the projector to your network using a commercially 
available 100BaseTX or 10BaseT network cable. Connect the 
cable to the 
LAN port on the projector. See page 55.
2. Point the remote control at the projector and press the P 
Power 
button.
3. Press the 
EasyMP button on the remote control to select EasyMP 
as the source. 
4. Press the 
Menu...

Managing Projectors155
7. Do one of the following:
■If your network assigns addresses automatically, turn on the 
DHCP setting.
■If your network does not assign addresses automatically, turn 
off 
DHCP and enter the projector’s IP Address, Subnet 
Mask
, Gateway Address, and DNS Servers, as needed. 
To enter numbers, use the  pointer button on the remote 
control to highlight the number you want to input, then press 
the 
Enter button. 
8. When you’re done making all necessary changes, select 
Return,...

156Managing Projectors4. Highlight 
On to receive email notifications, then press Enter.
5. Enter the IP address for the 
SMTP server for the projector.
You can enter a number from 0 to 255 in each field of the address. 
However, the following IP addresses cannot be used: 127.x.x.x, 
224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 
255).
6. Enter the SMTP server’s port number. The default value is 25. 
You can enter a numeric value from 1 to 65535.
7. Choose one of the 
Email Address fields,...

Managing Projectors157
Using EMP Monitor
EMP Monitor lets you use a remote computer to manage your 
projectors, whether connected wirelessly or over a wired network. It 
lets you easily turn the projectors on or off (together or individually), 
switch image sources, and check their status. 
Before using EMP Monitor, make sure you’ve installed the software 
(available for Windows only) as described on page 201. The 
computer you’re using to monitor the projector should already 
be connected to your...

158Managing Projectors
Registering a Projector
Before you can monitor a projector, you have to register it. Follow 
these steps to automatically search for your projector(s): 
1. Open EMP Monitor as described above. You see this screen:
2. Select 
Edit > New > Projector (automatic search).
You see this screen:
3. Click 
Search to locate projectors currently operating on the 
network.
note
If the projector is not 
automatically found, your 
projector may not be 
connected or configured 
correctly for the...

Managing Projectors159
Any projectors found on the network are listed as shown below:
4. Select the projector you want to add by clicking its name, then 
click the 
Edit button.
You see this screen:
5. Enter a Display name, select a Parent group (if necessary), enter a 
Monitor Password (if necessary), and enter a Description for the 
projector. Then click the 
Register button. 

160Managing ProjectorsTo register additional projectors with EMP Monitor, repeat steps 
2 through 5.
6. When you’re done adding projectors, click 
Cancel.
You see a screen with a list of all registered projectors:
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the 
Status, Video Source, and Error icons shown below. This lets you see 
which projectors are currently being used, from which source (or port) 
they are projecting an image, and if a problem occurs. 
For...