Epson Projector PowerLite 1224 User Manual

							2. Connect the wireless LAN module to the
USB-A(flat) port on your projector, if necessary.
3. Press the Menubutton on the projector or the remote control.
4. Select the Networkmenu and press Enter.
5. Select Network Configuration and pressEnter.
51  
						

							6. Select the
Wireless LAN menu and press Enter.
7. Select Connection Mode and pressEnter.
8. Select Quickand press Enter, then press Enteragain.
9. When you finish selecting settings, select Completeand follow the on-screen instructions to save
your settings and exit the menus.
52 
						

							10. Press the
Homebutton on the projector or the remote control.
11. Select Display the QR Code and pressEnter.
Your projector displays a QR code on the projection surface.
12. Open Epson iProjection on your smartphone or tablet.
13. Use the QR code reader feature to read the QR code and connect your device to the projector.
Your smartphone or tablet is now connected to your projector. Visit epson.com/projectorapp(U.S.) or
epson.ca/projectorapp (Canada) for information on controlling your projector with the Epson iProjection
app.
Parent topic: Wireless Network Projection
Related tasks
Installing the Wireless LAN Module
Selecting Wireless Network Settings Manually
Wireless Network Security Guidelines A wireless network allows the exchange of information using radio signals, so you can easily connect to
the network if you are within range of the radio signals. However, within a certain range, the signals can
reach unintended recipients.
53 
						

							Security experts recommend password protected wireless networks. Check with your network
administrator for guidance on setting up wireless security for your network.
If wireless security countermeasures are not implemented, problems such as the following may occur:
• Communicated data could be intercepted by a third party who is receiving wireless transmissions
without authorization, and who could obtain personal information from these transmissions such as
IDs, passwords, credit card numbers, or the contents of personal e-mail messages.
• Unauthorized access to a network by a third party could result in access to an individual or intra- company network without permission, allowing them to do any of the following:
• Retrieve personal data or other secret information (information leakage)
• Pose as another user and send inappropriate data (impersonation)
• Overwrite the contents of intercepted data and resend it (falsification)
• Introduce a computer virus which could cause data loss or system crashes (damage)
Parent topic: Wireless Network Projection
Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the
projector. Do not install any other type of wireless module.
Note:Your product may look different from the illustrations in this guide, but the instructions are the
same.
54 
						

							1. Remove the wireless LAN module cover screw.
2. Insert the wireless LAN module into the
USB-Aport.
55   
						

							3. Attach the wireless LAN module cover and secure it using the screw you removed.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Parent topic:
Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Using Quick Wireless Connection (Windows Only) You can use the Quick Wireless Connection USB key to quickly connect your computer to the projector
wirelessly. Then you can project your presentation and remove the key when you are done.
Note:The Quick Wireless Connection USB key is not included with your projector and is optional.
Note: Make sure the wireless LAN module is installed, if applicable. The wireless LAN module is not
included with all models.
Note: Your product may look different from the illustrations in this guide, but the instructions are the
same.
1. Turn on the projector.
56  
						

							2. Press the
LANbutton on the remote control.
You see a screen like this:
3. Verify that an SSID and IP address are displayed, then remove the wireless LAN module from the projector if necessary.
4. Insert the Quick Wireless Connection USB key into the same port used for the wireless LAN module.
You see a projected message that the network information update is complete.
5. Remove the USB key.
6. Reinsert the wireless LAN module into the projector.
57  
						

							7. Connect the USB key to a USB port on your computer or laptop.
Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchQWRD.exe, then
select Allow on the next screen.
8. Follow the on-screen instructions to install the Quick Wireless Connection driver. Note: If you see a Windows Firewall message, click Yesto disable the firewall for this application.
After a few minutes, your computer image is displayed by the projector. If it does not appear, press
the LAN button on your remote control or restart your computer.
9. Run your presentation as necessary.
10. When you finish projecting wirelessly, select the Safely Remove Hardwareoption in the Windows
taskbar, then remove the USB key from your computer.
Note: You may need to restart your computer to reactivate your wireless LAN connection.
Parent topic: Wireless Network Projection
Related references
Optional Equipment and Replacement Parts
Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector
using its menu system.
1. Turn on the projector.
2. Press theMenubutton.
58 
						

							3. Select the
Networkmenu and press Enter.
4. Make sure the Wireless Modeoption is set toWireless LAN On.
5. Select Network Configuration and pressEnter.
6. Select the Basicmenu and press Enter.
59 
						

							7. Select the following basic options as necessary:
•Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
• Web Control Password lets you enter a password up to 8 alphanumeric characters long for
accessing the projector over the web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent access to the projector by
anyone not in the room with it. The projector displays a random keyword that you must enter from
a computer using the EasyMP Network Projection software or an iOS or Android device using
iProjection.
• Display LAN Info lets you select how the projector displays network information. You can select
an option to display a QR code that lets you quickly connect your iOS or Android devices using the
Epson iProjection app.
Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow
buttons on the remote control to highlight characters and press Enterto select them.
8. Select the Wireless LAN menu and press Enter.
9. Select the settings on the Wireless LANmenu as necessary for your network.
10. When you finish selecting settings, select Completeand follow the on-screen instructions to save
your settings and exit the menus.
60